Topcon Maestro2 User manual

Topcon Medical Systems | Topcon Healthcare Solutions | topconmedical.com | topconhealth.com
Quick Guide
Maestro2
Register/Capture Procedure:
1. Register new patient or select your patient from the IMAGEnet6 main screen / press
2. Select preferred scan on Maestro2 Touch Panel / Align Patient / Capture Scan
3. Export report(s) and Review Scans using IMAGEnet6
1
3
2
Open IMAGEnet from Maestro Desktop /
ADD a new patient or Select Existing Patient
To add New Patient from Basic tab on PC, enter Patient ID,
press Enter. If Patient ID is already in the system, patient’s
data will appear; select patient then press . If patient is
NOT already in system, press New Patient, enter First/Last
Name, Birthday and Patient ID, then press Register, then
press .
Select your preferred scan from the Default Tab on
Maestro Touch Screen
OU (R/L) is the default setting. Maestro scans right eye first
OD (R), and then left eye OS(L) automatically.
STEP 1: Adjust patient chin rest up or down to place the
pupil in between the dotted blue lines.
STEP 2: Touch centre of the pupil to centre in blue box.
STEP 3: Press Capture Start. Instruct patient to look at
centre of green , have a blink and stare wide.

Topcon Medical Systems | Topcon Healthcare Solutions | topconmedical.com | topconhealth.com
Pupil automatically aligns. Remind patient to blink and
look at centre of green .
Note: With 3D Wide, the green will be on opposite
side of the eye that you’re scanning. For example, for
OD (R), the green will be slightly to patient’s left.
For OS (L), slightly to the patient’s right.
If the pupils do not automatically line up, press on
Manual Mode and tap on both pupils on the screen.
Then press Capture Start .
After Capture Start, see countdown at bottom of screen.
Tell patient to blink, look at centre of green , and
stare wide. At about the 1 second mark, remind them to
hold their eyes open and keep looking at the centre of the
green . (You will hear a clicking sound, and a flash at
the end).
Capture STOP is for Manual Capture Operation,
see Users’ Manual for advanced operation.
If scan and photo are good, press OK to proceed with other
eye. If there was a blink (black lines through the OCT grey
image on left of touch panel) or fixation error, press the
Eraser button to Delete and Repeat scan.
Once scan is completed, you will see a Blue P thumbnail
icon at bottom of computer screen (processed; data
ready to view in IMAGEnet6).
Visit Topcon Healthcare University at learning.topcon.com to learn more.