Tork Elevation H2 Xpress Mini Building instructions

Washroom Dispenser Service and Parts Manual
Tork Elevation H2 Xpress Mini Towel Dispenser
552120, 552228
Revision Date: 10-21-19
1 of 7
Essity Internal
Essity Internal
Tork
Elevation H2 Xpress M ini
Tow el Dispenser (216 capacity):
H2Xpress System :552120(white),
552228 (black)
Dispenser Dimensions HxWxD Inches (cm):
11.6x 11.9x 4.0 (29.5x 30.2x 10.1 cm)
H2 Xpress Towel Product Options:
100297 - Tork Xpress Premium Extra Soft Multifold Hand Towel, 4-Panel
101293 –Tork Advanced Multifold Hand Towel, 3-Panel
420580 - Tork Premium Multifold Hand Towel, 3-Panel
424824 - Tork Advanced Multifold Hand Towel, 3-Panel
424874 - Tork Advanced Multifold Hand Towel, 3-Panel

Washroom Dispenser Service and Parts Manual
Tork Elevation H2 Xpress Mini Towel Dispenser
552120, 552228
Revision Date: 10-21-19
2 of 7
Essity Internal
Essity Internal
Parts
PartDescription
Replacement SKU
H2 ELEVMINI HOOD
(W hite)
ELEVATION LOCK
(W hite)
200260 KEYFORALL
T ORK DISPENSERS
225522A
205502
200260 KEY
Part
Description w ith Replacement Instructions
Parts with SKUslistedare
available for orderas of the revision date on the m anual. Contact an
EssitySales Representative or the Essity Qualit yCoordinator to ordertheseparts.
If no SKUis listed,the
availability of the part is unk nown. Please contactthe Essity Qualit y
Coordinator for m ore inform ation (seeContacting Essity section).
Replacement SKU Description & Replacement Instructions
225522A
H2 ELEVATION MINI HOOD (W hite)
Thehood for the 552120A can be rem oved without anytools. Open the cover. Start
at the bottom hinge. Push hingepivot on coverup to disengage from back . Once
bottom hinge is free,top hinge can then be pushedover rib andcovercan be
rem oved.
205502
ELEVATION LOCK (W hite)
Thelock canbe replaced by pressing the plastic tabs on each side to free the lock
from the opening. A newlock canbe snapped in place.
200260 KEY
200260 KEY FOR ALL TORK DISPENSERS

3 of 7
Essity Internal
W ashroom Dispenser Service and Parts Manual
Tork Elevation H2 Xpress Mini Towel Dispenser
552120, 552228 Revision Date:
10-21-19
Essity Internal
Mounting and Filling Instructions
Installation instruction sheet and mounting template are provided inside each carton.
I
:"?
CJ \ + ?··-
\
/
\
r
lo 1m
I
'
x1
bd
-
x4
e$oo
x4
1.
Y 120cm
2 .
3 .
(
.
< T
H2
h ·
X 1 . 5 _ t== F LJ
x2
- x2
4 .
1 .
5 .
x2
- x2
4

4 of 7
Essity Internal
W ashroom Dispenser Service and Parts Manual
Tork Elevation H2 Xpress Mini Towel Dispenser
552120, 552228
Revision Date: 10-21-19
Essity Internal
Preventive M aintenance
The
dispenser should be cleaned an y tim e thereis heavy paperdust build-upinside the dispenser. If
paper dust is not a problem, approxim ately ever y year is a good frequency for cleanings. The following is
the recommended procedure to cleaning:
1) Openthe
dispenser and rem ovethe rem aining towels.
2) Cleanout
an y paperdust. This canbe done is several wa ys, such as, vacuum ing, blowing out with a
can of com pressed air (wear safety glasses), wipingout witha dam pcloth,etc.
3)
Clean the cover with a general all-purpose cleaner that is safefor plastics.
Troubleshooting
Problem : Any paper-related problem .
Tak e noteof the date code on the outside of the case of paper product. Then contact the Essity
Quality Coordinator and explain the problem .
Problem : Any otherproblem notstatedabove.
• Contact the Essity Quality Coordinator.

5 of 7
Essity Internal
W ashroom Dispenser Service and Parts Manual
Tork Elevation H2 Xpress Mini Towel Dispenser
552120, 552228
Revision Date: 10-21-19
Essity Internal
Contacting Essity
To
contact the Essity Quality Coordinator, dial 1-866-722-6659 and press 6. If asked for the date code
on the dispenser, see instructions below.
Product DateCodeLocation: The assembly date code for the product can be found on the Tork Select
label affixed to the inside back of the dispenser.

6 of 7
Essity Internal
W ashroom Dispenser Service and Parts Manual
Tork Elevation H2 Xpress Mini Towel Dispenser
552120, 552228
Revision Date: 10-21-19
Essity Internal
552120 - T ork Elevation H2 Xpress M ini Hand Tow el Dispenser
Mounting Hole Dimensions (mm)
Recommended Mounting Height (standard access)
Bottom of towel
dispenser to be located47.25” (120cm)abovefinished floor.

7 of 7
Essity Internal
W ashroom Dispenser Service and Parts Manual
Tork Elevation H2 Xpress Mini Towel Dispenser
552120, 552228
Revision Date: 10-21-19
Essity Internal
Recommended M ountingHeight (AD AAG Guideline)
4.22.7 Controls and Dispensers. If controls, dispensers, receptacles, or other equipm ent are provided,
then at leastone of eachshallbe on an accessible route and shall com ply with 4.27.
4.27.3* Height. The highest operable part of controls, dispensers, receptacles, and other operable
equipm ent shallbe placed within at least one of the reachranges specified in 4.2.5and 4.2.6.
4.2.5*
Forw ard Reach. If the clear floorspace only allows forward approach to an object, the m aximum
high forward reachallowedshallbe 48 in (1220mm)(see Fig.5(a) )
Figure
5a
High Forw ard Reach Limit
4.2.6* Side Reach. If the clear floor space allows parallel approach
b y a person in a wheelchair, the
maximum high side reach allowedshall be 54 in (1370 mm) and the low side reachshall be no less than
9 in (230 mm ) abovethe floor (Fig.6(a) and (b)).
Figure 6(a) Figure 6(b)
Clear Floor
Space - Parallel Approach High and Low - Side Reach Limits
Under4.4.1,the
Elevation H2 XpressMini dispenser canbe located on an ywall surface because it
protrudes 4” or less. It will com ply with ADAAG regulations as longas it is m ounted at the appropriate
heightfor the approach specified above.