Toro TEMPUS DC LCD User manual

TEMPUS DC LCD Controller 1_2_4_6
Residential Controller
English
User’s Guide

2
Toro TEMPUS DC LCD Controller 1_2_4_6
TEMPUS DC LCD Controller Features
• Large Display and Easy programming:
• 1 to 6 valves output
• 4 Independent Watering Programs, A, B, C, D
• Watering Schedule by 7 Day Calendar, Day Interval or Odd/Even Days
• 3 Start Times per Program
• Run Time up to 8 hours with 1 min increment
• User Set Budget
• Permanent programs retention in memory without Battery
• 100% Waterproof (IP68)
• Bluetooth connection
TEMPUS DC LCD Controller 1_2_4_6

3
Toro TEMPUS DC LCD Controller 1_2_4_6
INTRODUCTION
Remotely controlled system, TEMPUS DC LCD is a Bluetooth® and waterproof
irrigation controller.
TEMPUS DC LCD is the ideal solution for all those applications where there is
no power supply.
Control your irrigation through either the large LCD display and or the intuitive
TEMPUS DC App.
English
DIMENSIONS
• 105 mm W
• 155 mm H
• 48 mm D
• Weight: 260 g
POWER
• Power Supply: 9 VDC or 4 x 1,5V AAA battery pack
• Output: 9 VDC solenoid (latch type)
• Maximum 1 output ON at a time.
WORKING PRESSURE
• Qualified on DCL samples up to 6 bars of water pressure
WORKING TEMPERATURE
• From -10°C to 50°C
MODELS
• TEMP-1-DC-L 1 Station plus MV
• TEMP-2-DC-L 2 Station plus MV
• TEMP-4-DC-L 4 Station plus MV
• TEMP-6-DC-L 6 Station plus MV
SPECIFICATIONS

4
Toro TEMPUS DC LCD Controller 1_2_4_6
WIRING
STEP 1
+S- C P 1 2 3 4 5 6 C
2. You can connect on the P output a master valve. The output will automatically
start 2s before each station and during the watering of each stations.
+S- C P 1 2 3 4 5 6 C
3. (Option) If you want to install a rain sensor, cut the yellow wire of the TEMPUS DC
LCD and connect it to the sensor.
The rain sensor when it is connected instead of the yellow wire (see wiring step
for each model) aects all the 4 programs. If it rains and the rain sensor is active,
programs A or B or C or D will not start. It is necessary to wait until the probe has
dried to see the programs restart. The manual control «All stations» does not take
into account the condition of the rain sensor.
+S- C P 1 2 3 4 5 6 C
1. Connect the TEMPUS DC LCD to the solenoids as described below.
Use 9VDC solenoid (latch type).
APP DOWNLOAD
1. On your smartphone or tablet, go to the «App Store» or to the «Play Store» app.
2. Search for «The Toro Company» in the search bar..
3. Once found, download the TEMPUS DC App.
Developer
The Toro Company
5. The features required for the Bluetooth® product to work:
- Smartphone or tablet running Android 4.3 or greater with Bluetooth Smart 4.0
or greater.
- Apple iPhone or iPad running iOS 9.0 or greater with Bluetooth Smart 4.0 or
greater
4. Once installed, activate the Bluetooth® of your smartphone or tablet.
STEP 2

5
Toro TEMPUS DC LCD Controller 1_2_4_6
STEP 3
English
Thanks to its large display and keyboard TEMPUS DC LCD can be programmed without
Bluetooth.
OPERATION WITH BUTTONS
Display
Main Menu
Battery level indicator
Select menu button
Validation button
Setting button + or -
PAIRING
1. Unscrew the TEMPUS DC LCD’s cap
2. Plug the 9V alkaline battery or the 4 x 1,5V AAA battery pack. Screw the cap
3. Launch the TEMPUS DC App.
4. Tap on the «Add a module» button or on the «+» button.
5. Choose the TEMPUS DC LCD from the list of nearby controllers.
6. To finish the pairing of your TEMPUS DC LCD, follow the next steps described in
the app
7. After pairing, select the “Power source” (9V or AAA) in the APP, Information
Menu.
Starting Display

6
Toro TEMPUS DC LCD Controller 1_2_4_6
STEP 4
INITIALIZING
PHASE 1
TURN ON THE DISPLAY LCD
PHASE 2
SET DATE & TIME AND POWER SOURCE
2. SET 12H OR 24H TIME FORMAT
2. SET THE YEAR
3. SET THE MONTH
TURN ON THE LCD DISPLAY
PRESS THE HOME BUTTON UP TO "DATE”
1. PRESS THE BUTTON AND SET THE “DATE”
Note: In 24H Time format the Date format is dd/mm/yy
In 12H AM/PM Time format the Date format is mm/dd/yy

7
Toro TEMPUS DC LCD Controller 1_2_4_6
English
STEP 4
4. SET THE DAY
INITIALIZING
5. SET THE TIME (HOURS)
6. SET THE TIME (MINUTES)
7. SET POWER SOURCE (9V or AAA)
Note: In 24H Time format the Date format is dd/mm/yy
In 12H AM/PM Time format the Date format is mm/dd/yy

8
Toro TEMPUS DC LCD Controller 1_2_4_6
STEP 5
Run or stop manual command:
- Allows to manually turn on a
station or a program A,B,C,D
- Allows to manually shutdown
the watering in progress.
Set the irrigation program :
Allows to set the custom
programs that will be started
automatically.
ON/OFF Command :
Disable all current or future
programs.
Set Date, Time & Source Power:
Allows to set the date and time of
the current day in 12 or 24 hour
format.
Allows to set the Source Power in
9V or AAA.
MAIN MENU
1. DISPLAY INFORMATION
2. MANUAL MODE
3. PROGRAM MODE
4. PAUSE, ON/OFF MODE
5. DATE & TIME MODE

9
Toro TEMPUS DC LCD Controller 1_2_4_6
English
STEP 6
PROGRAMMING
1. SELECT PROGRAM
3. SET THE WATER BUDGET (BETWEEN 0% AND 200%)
4. SET PROGRAM START TIME (3 PER PROGRAM)
5. SET STATION RUN TIME DURATION (UP TO 8H WITH 1 MIN INCREMENT)
TURN ON THE LCD DISPLAY
PRESS THE HOME BUTTON UP TO “PROG”
a. PRESS THE BUTTON AND SELECT THE PROGRAM (A, B, C,D)
2. SELECT A DAY INTERVAL SCHEDULE
a. PERS: TO SET INDIVIDUAL DAYS OF THE WEEK
b. EVEN: TO SET EVEN DAYS OF THE MONTH
c. ODD: TO SET ODD DAYS OF THE MONTH WITH 30 DAYS
d. OD31: TO SET ODD DAYS OF THE MONTH WITH 31 DAYS
Note: Use the Tempus DC App to select the Period Mod (to set a day interval from 1 to 31 days)

10
Toro TEMPUS DC LCD Controller 1_2_4_6
STEP 7
CONTROL OPERATIONS
PAUSE. SET ON/OFF THE CONTROLLER SET MANUAL OPERATION
TURN ON THE LCD DISPLAY
PRESS THE HOME BUTTON UP TO “MAN”
a. STOP: TO STOP MANUAL MODE
b. PROG: FOR MANUAL PROGRAM OPERATION
c. STAT: FOR MANUAL STATION OPERATION
1. PRESS THE BUTTON AND SELECT THE MANUAL OPERATION (STOP, PROGRAM,
STATION)
TURN ON THE LCD DISPLAY
PRESS THE HOME BUTTON UP TO “ON/OFF”
1. PRESS THE BUTTON AND SELECT THE PAUSE (ON, OFF, OFF DAYS)