Toro 111-8010 User manual

FormNo.3395-628RevA
ArmPinKit
Groundsmaster®34004-WheelDriveTractionUnit
WithSerialNumberupto315000001
ModelNo.111-8010
InstallationInstructions
Installation
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
DescriptionQty.Use
Wearplate2
Armpin2
Carriagebolt4
Hexnut(M10)4
Hexnut(M24)2
Washer(M24)2
Installtheliftkit.
©2015—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.T oro.com.OriginalInstructions(EN)
PrintedintheUK
AllRightsReserved*3395-628*A

Beforeinstallingthekit,readandunderstandthesafety
precautionsintheGM3400OperatorManual.Ifyouhave
anydoubtsontheinstallationprocedure,consultyourlocal
authoriseddealer.
1.Positionthemachineonalevelsurface,lowerthe
cuttingdeck,engagetheparkingbreak,ensurethatthe
tractionpedalisintheNeutralpositionandthePTO
leverintheOFFposition,stoptheengine,andremove
thekeyfromtheswitch.
Note:Ensurethereisnoresidualpressureinthe
hydrauliccircuit
2.Removethecuttingdeckfromtheliftarms.Referto
theOperator’sManual.
3.Startthemachine,raisetheliftarmsuntiltheyarein
thestoredposition,andlatchtheminplace.
4.Loosenfrontwheelnuts.
5.Usingappropriateliftingequipment,liftthefrontof
themachineandplaceon2axlestands.
Note:Ensurethattheyareappropriatelypositioned
sothatthemachineisstabletoworkaround.
6.Removebothofthefrontwheels.
Note:Usingtheappropriateliftingequipment,place
thefrontofthemachineontotwoaxlestandsand
ensurethattheyareappropriatelypositionedsothat
themachineisstabletoworkaround.
7.Removetheexistingliftarmpivotpinonbothliftarms.
8.Installthewearplateontotheoutsidefaceofthe
existingfrontliftbracketusingthecarriageboltsand
M10nut(Figure1).
Note:WaittoinstallthetopM10nutuntilthenew
armpinisinstalled.
2
1
3
g029230
Figure1
1.Carriagebolt3.M10nut
2.Wearplate
9.Installthearmpinfromtheoutsideofthemachine
throughthewearplateandthroughtheliftarmpivot
bush(Figure2).
Note:Tohelptthenewpin,addasmallamountof
greasetotheshaft.
g029231
2
1
3
4
Figure2
1.M24nut3.Armpin
2.M24washer4.M10nut
10.Securethepintotheinsideofthechassisusingthe
M24nutandwasher(Figure2).
11.Repeatthesestepsforthesecondliftarmpin.
12.Installthefront2wheelsbackontothemachineand
removetheaxlestands.
13.Installthecuttingdeckbackontothemachine
followingtheinstructionsfoundintheOperator’s
Manual.
2