Toro 137-5001 User manual

FormNo.3415-409RevA
CEBaggerComplianceKit
TimeCutter®HDRidingMower
ModelNo.137-5001
InstallationInstructions
Installation
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
ProcedureDescriptionQty.Use
1Nopartsrequired–Removetheexistingcurtainandknob.
Curtain1
2Bolt(1/4x5/8inch)1Installthenewcurtain.
WARNING
CALIFORNIA
Proposition65Warning
ThisproductcontainsachemicalorchemicalsknowntotheStateofCalifornia
tocausecancer,birthdefects,orreproductiveharm.
1
RemovingtheExisting
CurtainandKnob
NoPartsRequired
Procedure
1.Parkthemachineonalevelsurface,shutoffthe
engine,engagetheparkingbrake,andremove
thekey.
2.Removetheexistingcurtainbylooseningthe
boltsholdingthecurtaintotheframeandthe
mowerdeck(Figure1).
g213267
Figure1
1.Bolts2.Curtain
©2017—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.T oro.com.OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved*3415-409*A

3.RemovetheknobshowninFigure2.
g201515
Figure2
1.Knob3.Beltcover
2.Poweredbaggercover
2
InstallingtheNewCurtain
Partsneededforthisprocedure:
1Curtain
1Bolt(1/4x5/8inch)
Procedure
1.Removetheboltsandretainingnutsfromthe
straightrodintheexistingcurtainandretainthe
nutsandbolts.
2.Removethestraightrodfromtheexisting
curtain.
3.Installthestraightrodintothenewcurtain
andinstallthepreviouslyremovedboltsand
retainingnuts.
4.Installthenewcurtaintotheframeandthe
mowerdeckusingtheexistinghardware(Figure
3).
5.Installthebolt(1/4x5/8inch)intothehole
wheretheknobwasremoved(Figure3).
g213343
Figure3
1.Existingcurtainhardware3.Newcurtain
2.Bolt(1/4x5/8inch)
2