Toro 4045 User manual

FormNo.3396-148RevB
StakeDownGuards
4045DirectionalDrill
ModelNo.23807
ModelNo.23807E
InstallationInstructions
WARNING
CALIFORNIA
Proposition65Warning
ThisproductcontainsachemicalorchemicalsknowntotheStateofCaliforniato
causecancer,birthdefects,orreproductiveharm.
Safety
SafetyandInstructionalDecals
125-6179
1.Warning—hazardarea;keepatleast3meters(10feet)
awayfromthemachinewhileinoperation.
©2015—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.T oro.com.OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved*3396-148*B

1
PreparingtheMachineand
InstallingtheLeftGuard
Partsneededforthisprocedure:
1Proximity-sensorcap
1Guardcover
1Guard-supportbracket
6U-nut
6Bolt(M8-11/4x35mm)
1Leftguard
1Bolt(M12-13/4x120mm)
1Locknut(M12)
1Bolt(M8-11/4x30mm)
1Locknut(M8)
Procedure
1.Disconnecttheproximitysensorthatisconnectedto
thedooronthecage.
2.Gatherupthewiringharnesswiththesensorandusea
cabletietosecuretheharnesstothemachine.
3.Connecttheproximitysensorcaptotheendofthe
wiringharnessconnection.
4.Removethedoor,cageassembly,andleftguard(Figure
1).
Figure1
5.Place3U-nutsontheguard-supportbracket(Figure3).
6.Installtheguard-supportbracketontotheguardcover
(Figure2).
7.Place3U-nutsontheguardcover.
8.Looselyinstalltheassemblytotheframeusing5bolts
(M8-11/4x35mm)asshowninFigure2.
Figure2
1.Bolts(M8-11/4x35mm)
9.Usingtheguard-supportbracketasaguide,markthe
locationofwheretodrillaholeintotheframe(Figure
2).
Figure3
Guard-supportbracketshownwithoutguardcoverfor
illustrativepurposesonly
1.Drillholehere3.Guard-supportbracket
2.U-nut
10.Removetheguardassemblyanddrilltheholeintothe
frame.
2

11.Installtheguardassemblyontotheframe(Figure2)
using6bolts(M8-11/4x35mm).
12.Torquetheboltsto23to29N-m(17to21ft-lb).
13.Installtheleftguardassemblyusing1bolt(M8-11/4x
30mm),1locknut(M8),1Bolt(M12-13/4x120mm),
and1locknut(M12)asshowninFigure4.
Figure4
1.Bolt(M12-13/4x120mm)4.Bolt(M8-11/4x30mm)
2.Locknut(M8)5.Locknut(M12)
3.Leftguardassembly
14.TorquetheM8boltsto23to29N-m(17to21ft-lb).
15.TorquetheM12boltsto80to100N-m(59to73ft-lb).
2
InstallingtheRightGuard
Brackets
Partsneededforthisprocedure:
1Upperbracket,large
2Bolt(M12-13/4x120mm)
2Locknut(M12)
1Upperbracket,small
1Lowerbracket
4Bolt(M8-11/4x30mm)
4Locknut(M8)
Procedure
1.Rotatethehydrauliclinesasneededtoensurethatthey
donotrubonthestakedownguardassemblies(Figure
5).
1
g0304 32
Figure5
1.Hydraulicttings/lines
2.InstalltheuppersupportbracketsasshowninFigure6.
3

Figure6
1.Bolt(M12-13/4x120mm)4.Upperbracket,large
2.Bolt(M8-11/4x30mm)5.Locknut(M8)
3.Upperbracket,small6.Locknut(M12)
3.TorquetheM8boltsto23to29N-m(17to21ft-lb).
4.TorquetheM12boltsto80to100N-m(59to73ft-lb).
5.Installthelowerbracketusing2bolts(M8-11/4x30
mm)and2locknuts(M8)asshowninFigure7.
Figure7
1.Lowerbracket3.Bolts(M8-11/4x30mm)
2.Locknuts(M8)
6.TorquetheM8boltsto23to29N-m(17to21ft-lb).
3
InstallingtheStakedown
Guard
Partsneededforthisprocedure:
1Stakedownguard
8Bolt(M8-11/4x30mm)
8Locknut(M8)
Procedure
Rotatethehydrauliclinesasneededtoensurethatthey
donotrubonthestakedownguardassemblies.
Installthestakedownguardusing8bolts(M8-11/4x25mm)
and8locknuts(M8)asshowninFigure8.
Figure8
Torquetheboltsto23to29N-m(17to21ft-lb).
4