Toshiba 3560 User manual

3560
Networking Documents.
DIGITAL PLAIN PAPER COPIER
OPERATOR’S MANUAL FOR COPYING FUNCTION

1. Do not touch the connector terminal when disconnecting the cables of peripheral equipment.
2. Before opening any covers or removing any units from the copier, discharge the static electricity
from your body by touching a metal part of the copier.
This product is carrying the C -Mark in accordance with the related uropean Directives.
Responsible for C -marking is TOSHIBA T C G RMANY IMAGING SYST MS GmbH,
Carl-Schurz-Str.7, 41460 Neuss, Germany. e-mail : [email protected].

DESCRIPTION OF THE COPIER
1
PREFACE PRECAUTIONS
Having very useful features such as Auto xposure Selection, Automatic Paper Selection,
Automatic Magnification Selection, etc., the 3560 is an easy-to-operate, high-speed, plain
paper copier which allows anyone to produce high-quality copies easily and quickly. The 3560
can be used over a wide range of applications as listed below:
●High speed copying of 35 cpm in A4 size
●Auto xposure, which automatically senses the copy density and sets the appropriate
exposure
●Automatic Paper Selection, which automatically detects the size of the original and feeds
the same size of paper
●Automatic Magnification Selection, which automatically detects the size of the original and
calculates the appropriate reproduction ratio which matches the selected size of paper
●Wide Zoom range of 50% ~ 200% at 1% increments
●Duplex copying: Capable of 2-sided copying of 1-sided and 2-sided originals with the
optional auto duplexer installed.
●diting capability, which allows a part(s) of the original to be masked or trimmed
●2 in 1 copying: Allows two originals to be copied onto a single sheet of paper (optional)
●Image Shift, dge rase and Dual Page copying capabilities
●Cover Sheet mode, in which the front and/or back covers are automatically attached to
each set of copies
●Sheet Insertion mode, in which special sheets are automatically inserted into a set of copies
at specified pages as you like
●Weekly Timer, which automatically turns on and off the copier at the specified times of each
working day
●Auto Start, which automatically starts copying after warm-up if you set the desired copy
modes and press the PRINT key during warm-up
●Versafile sheet by pass, which allows edge erase
copying, dual page copying, duplex copying,
etc. decause paper size setting is possible.
We are very happy you have chosen the Toshiba 3560 Plain Paper Copier.
The 3560 is easy to maintain, designed for simple operation and makes excellent plain paper copies.
This Operator’s Manual gives a description of how to use the copier as well as how to remedy simple
problems. We recommend that you use this manual to help you to obtain good copies. Please read
this manual thoroughly to ensure correct operation and keep it handy for future reference.
Features of the 35 0
COPYRIGHT 1997
TOSHIBA CORPORATION
PREFACE

2
■PREFACE .................................................................................................................................. 1
■PRECAUTIONS ......................................................................................................................... 5
1. PRECAUTIONS FOR INSTALLATION ............................................................................... 5
2. GENERAL PRECAUTIONS ................................................................................................ 6
■DESCRIPTION OF THE COPIER .............................................................................................. 9
1. NAMES OF THE MAIN COMPONENTS .......................................................................... 10
2. DESCRIPTION OF THE CONTROL PANEL .................................................................... 12
3. DESCRIPTION OF THE MESSAGE DISPLAY ................................................................ 14
4. DESCRIPTION OF THE GRAPHIC DISPLAY .................................................................. 16
5. DESCRIPTION OF THE OPTIONAL EQUIPMENT .......................................................... 18
■HOW TO MAKE COPIES ........................................................................................................ 19
1. TURNING ON THE POWER SWITCH/AUTO START ....................................................... 20
2. COPYING IN THE AUTOMATIC PAPER SELECTION MODE ......................................... 22
3. USING THE AUTOMATIC DOCUMENT FEEDER............................................................. 25
●ADF (Stack Feed) Mode ................................................................................................. 26
●SADF (Auto Feed) Mode ................................................................................................ 29
4. COPYING BY SPECIFYING THE COPY SIZE ................................................................. 32
5. BYPASS COPYING ........................................................................................................... 34
6. BYPASS COPYING BY SPECIFYING THE COPY SIZE ................................................. 36
7. REDUCTION AND ENLARGEMENT COPYING ................................................................ 38
●Using Automatic Magnification Selection (AMS) ............................................................ 38
●Specifying the Original Size and the Copy Size ............................................................. 40
●Using the Zoom Keys................................................................................ 41
8. INTERRUPT COPYING ..................................................................................................... 42
9. SELECTING THE EXPOSURE MODE .............................................................................. 44
●Copying in Automatic Exposure ..................................................................................... 44
●Copying in Manual Exposure .......................................................................................... 44
10. COPYING IN THE PHOTO MODE .................................................................................... 45
11. USING THE FUNCTION CLEAR KEY .............................................................................. 46
■SPECIAL FUNCTIONS ............................................................................................................ 47
1. DUAL-PAGE COPYING ..................................................................................................... 48
2. 2 in 1 MODE COPYING ..................................................................................................... 49
3. EDGE ERASE COPYING .................................................................................................. 53
4. IMAGE SHIFT COPYING .................................................................................................. 56
5. DUPLEXED COPIES FROM SINGLE-SIDED ORIGINALS ............................................... 59
●Using the Automatic Document Feeder .......................................................................... 60
●Setting the Originals on the Glass .................................................................................. 63
●Using the Dual-Page Copying Function .......................................................................... 65
6. DUPLEXED (or SINGLE-SIDED) COPIES FROM TWO-SIDED ORIGINALS ................... 67
7. DUPLEXED COPIES FROM BOOK ORIGINALS .............................................................. 70
8. TRIMMING/MASKING COPYING ...................................................................................... 73
9. COVER SHEET COPYING ................................................................................................ 78
10. SHEET INSERTION COPYING ......................................................................................... 82
TABLE OF CONTENTS

DESCRIPTION OF THE COPIER
3
SPECIAL FUNCTIONS
HOW TO MAKE COPIES
USING THE OPTIONAL SORTERS
WHEN THE GRAPHIC SYMBOLS FLASH
MAINTENANCE
SPECIFICATIONS/ ACCESSORIES/ OPTIONS
PREFACE PRECAUTIONS
■OTHER SPECIAL FUNCTIONS............................................................................................... 87
1. USING THE JOB ACCESS CODES .................................................................................. 88
2. USING THE KEY COPY COUNTER (Optional) ................................................................. 89
3. USING THE TIMER ................................................................................. 90
●Checking the Set Times for the Day .............................................................................. 90
●Making Copies after Auto Shutoff ................................................................................... 91
●Suspending the Use of the Weekly Timer ...................................................................... 92
4. SETTING THE WEEKLY TIMER ....................................................................................... 93
5. SETTING THE DATE AND TIME ...................................................................................... 94
6. ADJUSTING THE CONTRAST OF THE MESSAGE DISPLAY ........................................ 96
7. SETTING A CASSETTE FOR COVER SHEET/SHEET INSERTION COPYING ............. 98
8. USING THE MODE MEMORY KEYS .............................................................................. 100
9. COPYING WITH “UNIVERSAL” SIZE COPY PAPER ..................................................... 102
10. THICK PAPER COPYING ............................................................................................... 105
11. BYPASS AUTO STARTING ............................................................................................ 106
■USING THE OPTIONAL SORTERS ...................................................................................... 107
1. DESCRIPTION OF THE SORTERS ................................................................................ 108
2. NON-SORT COPYING ..................................................................................................... 109
3. SORT OR STAPLE COPYING ........................................................................................ 111
4. GROUP COPYING........................................................................................................... 115
■WHEN THE GRAPHIC SYMBOLS FLASH ........................................................................... 117
1. OPENING AND CLOSING THE UPPER UNIT ................................................................ 118
2. ADD PAPER SYMBOL ................................................................................................... 120
3. REPLACE TONER BAG SYMBOL ....................................................................... 125
4. REPLACE TONER CARTRIDGE SYMBOL ........................................................... 127
5. CLEAR PAPER SYMBOL ...................................................................................... 130
6. CHECK ORIGINAL SYMBOL ................................................................................. 143
7. SORTER MISFEED SYMBOL ............................................................................... 145
8. REPLACING STAPLE CARTRIDGES ............................................................................. 150
9. REMOVING JAMMED STAPLES .................................................................................... 157
10. CALL SERVICE ............................................................................................................... 165
11. PERIODIC MAINTENANCE ............................................................................................. 165
■MAINTENANCE ..................................................................................................................... 167
1. CLEANING THE CHARGERS .......................................................................................... 168
2. CLEANING THE COPIER ................................................................................................ 169
3. SIMPLE TROUBLESHOOTING ....................................................................................... 170
OTHER SPECIAL FUNCTIONS (PROGRAM)

4
■SPECIFICATIONS/ACCESSORIES/OPTIONS ..................................................................... 173
1. SPECIFICATIONS OF THE 3560 .................................................................................... 174
2. ACCESSORIES OF THE 3560 ........................................................................................ 174
3. SPECIFICATIONS OF THE AUTOMATIC DOCUMENT FEEDERS (Optional) ............... 175
4. SPECIFICATIONS OF THE AUTOMATIC DUPLEXING UNIT (Optional) ....................... 175
5. SPECIFICATIONS OF THE LARGE-CAPACITY FEEDERS (Optional) .......................... 176
6. SPECIFICATIONS OF THE PAPER FEEDING PEDESTALS (Optional) ........................ 176
7. SPECIFICATIONS OF THE SORTERS (Optional) .......................................................... 177
■PREVENTATIVE MAINTENANCE
TABLE OF CONTENTS (Cont.)

DESCRIPTION OF THE COPIER
5
PRECAUTIONS
1. PRECAUTIONS FOR INSTALLATION
11
11
1
22
22
2
The 35 0 should be installed by a qualified service technician.
Note: The packing material should be disposed of properly.
To obtain the best possible results, this machine should be used in conjunction with
a dedicated AC power line at one of the following ratings:
220-240 V, 50/ 0 Hz, 8 A
Notes:
1. The use of other appliances or other equipment on the same line as this machine may
adversely affect performance and copy quality.
2. Be sure to use a 3-conductor, grounded wall outlet.
3. In areas where a 2-pin plug is used, the machine must be grounded for safety.
Never ground it to a gas pipe, a water pipe, or any other object not suitable for grounding.
Select a suitable place for installation. Avoid excessive heat, dust, vibration, and direct
sunlight. Also, provide proper ventilation as the copier emits a slight amount of ozone.
To insure optimal operation, allow clearances of at least 80 cm (32”) on the left, 80 cm
(32”) on the right and 10 cm (4”) in the rear.
The machine should be located near an easily accessible wall outlet.
33
33
3
44
44
4
PREFACE PRECAUTIONS
*When an optional sorter is
attached, a distance of
approx. 1m 35 cm is required.
** When an optional large
capacity feeder is attached,
a distance of approx. 1m is
required.

6
PRECAUTIONS (Cont.)
2. GENERAL PRECAUTIONS
11
11
1
Handle and use the machine gently and carefully.
●Do not place heavy objects on the copy-receiving tray, original feed tray or sorter.
Caution: Do not push the sorter or put heavy objects on it. Doing so may knock over the sorter
causing personal injury.
●Never allow the power cable to be trampled on or pinched between hard objects, otherwise
an accident or electrical trouble might occur.
●Do not allow any metal things such as paper clips to fall into the machine.
●Periodically check to ensure the power-cord plug is securely inserted in the wall outlet.
●Do not disassemble the copier or try to repair it yourself other than as instructed in this
operator’s manual. Call your sales or service representative for all necessary repairs.
Incorrect reassembly can cause electrical hazards and possible damage to the copier.
●Do not touch the fuser area of this copier. This area is very hot.
●Avoid direct viewing of the exposure lights. It is recommended that the original cover or
automatic document feeder be kept closed.
●If you intend to move or relocate this copier, contact your sales or service representative.
Do not attempt to relocate the copier on your own.
●Do not tamper with interlock switches. Interlock switches are provided to ensure that the
copier will not operate with covers opened.
Be sure to turn OFF the power switch:
●When you leave your office at night.
●If a power failure occurs.
Caution: When turning OFF the power switch, be sure to do so after the machine cycling
has come to a complete stop.
If any paper has misfed in the machine, be sure to remove it before turning OFF the power
switch.
Be sure to disconnect the power-cord plug:
●When you do not intend to use the machine for an extended period of time.
Be sure to turn OFF the power switch, unplug this copier from the wall outlet
immediately and call for service:
●If an unusual noise is heard from the machine.
●If the outside of the machine becomes unusually hot.
●If any part of this copier is damaged, or if it has been dropped.
●If the copier has been exposed to rain or liquid.
It is recommended that only supplies made or designated by Toshiba be used for the
35 0 in order to optimize copy quality. All supplies should be stored in a cool, dry area.
For optimum performance, it is recommended that 80 g/m2 xerographic bond paper of high
quality be used.
Paper of lower quality may contain inherent properties such as excess paper dust and may
lead to premature servicing.
Do not use supplies or cleaning materials for purposes other than what they were intended.
Keep all supplies and materials out of reach of children.
22
22
2
33
33
3

DESCRIPTION OF THE COPIER
7
Machine Noise Information
Ordinance 3. GSGV, January 18, 1991: The maximum sound pressure level is equal or less than
70 dB(A) according to N27779.
GENERAL PRECAUTIONS (Cont.)
66
66
6
55
55
5
44
44
4
Handle and store the drums carefully. Do not damage the drums or expose them to high
heat, flames or chemicals.
Do not leave the upper unit of the machine open; otherwise, the drum may be exposed
to light, heat, flames or chemicals, possibly resulting in degraded copy quality.
Please be sure to return used or unneeded drums to your sales or service representative.
WARNING - MACHIN MUST B S CUR D TO PAP R F D P D STAL OR STAND.
BRACK T MUST B ATTACH D TO STAND OR MACHIN IF US D ON A TABL . NON-
TOSHIBA STANDS MAY NOT BE CAPABLE OF ACCOMPLISHING TH S N DS.
DO NOT L AN ON, APPLY FORC OR PLAC H AVY OBJ CTS ON SORT R.
P RSONAL INJURY OR PROP RTY DAMAG MAY R SULT.
PREFACE PRECAUTIONS

8

DESCRIPTION OF THE COPIER
9
DESCRIPTION OF THE COPIER

10
1. NAMES OF THE MAIN COMPONENTS
Original cover
(optional) Operator’s manual
pocket (Back side)
Copy tray Control panel
Cassette
Cassette
(optional)
Cassette
Cassette
Paper feed pedestal
(optional)
Automatic
duplexing unit (ADU)
Front cover
Original cover
(optional)
Original grass
Original scale
Available paper
indicator
Power switch
Paper size indicator
Bypass guide
Key copy counter slot
Feed side cover
(pedestal)
Slot cover
Cassette (optional)

DESCRIPTION OF THE COPIER
11
DESCRIPTION OF THE COPIER
Fuser unit knob
xit side cover
Fuser unit
Toner bag
Lower charger
cleaning knob
Jam removal
knob
Toner cartridge
Drum
Upper charger cleaning knob
Upper unit
Upper-unit
release lever

12
8888800
2. DESCRIPTION OF THE CONTROL PANEL
햲TOTAL COUNTER Display
The total number of copies made after the
copier was installed is shown here.
햳CLIP TRAY
Put paper clips removed from the originals
here for safe keeping.
햴TIMER Lamp ( page 90)
This lamp lights if the timer has been set.
During the OFF (auto-shutoff) period, you
can turn on the copier by pressing PRINT key
to make copies.
햵ENERGY SAVER Key
When the copier is not used for a fairly long
period of time such as during lunch time,
press this key and the copier will go into the
energy-saving mode, turning all its display
lamps off. To resume copying, press this key
again. After about 30 seconds, the copier will
become ready for copying.
햶INTERRUPT Key ( page 42)
When you want to make a copy of a different
original during a multicopy run, press this
key. During interrupt copying, copies can be
made only one by one. To return to the
previous multicopying run, press this key
again.
햷MESSAGE Display ( page 14)
The status of the machine, operation proce-
dure and various instructions to the user are
shown in pictorials and text.
햸INFO Key
Use the key to display the appropriate opera-
tion procedure and to answer the questions
from the copier. The key is also used for other
purposes.
햹
FUNCTION CLEAR Key( page 21/46)
When you press this key, all the modes you
have selected will be cleared to the standard
status.
햺
ZOOM / / Keys ( page 41)
Pressing the key decreases the repro-
duction ratio to 50% at increments of 1%.
Pressing the key increases it to 200%.
Pressing the key will return to the
actual-size (100%) mode.
햻ORIGINAL SIZE Keys ( page 40)
Use these keys to set the size of the original.
When an original size is set with the paper
size already selected, the correct reproduc-
tion radio will automatically be calculated and
shown on the message display.
햲햳 햴햵 햶햷
헅헄헃

DESCRIPTION OF THE COPIER
13
COPY
A4
A3
B4
A5
UNIV RSAL
ORIGINAL
APSAMS
231
564
897
C/0
INFO
F C
100%
200%
50%
DESCRIPTION OF THE COPIER
햽COPY SIZE Keys (v page 40)
Use these keys to select the desired size of
paper.When the paper supply of the selected
size runs out, the corresponding cassette will
flash and the message “ADD PAP R” will be
displayed on the Message Display panel.
햾AUTOMATIC PAPER SELECTION
Key ( page 22)
Normally, the automatic paper selection (APS)
mode is selected. The copier will automati-
cally detect the size of the original and
select the same size of paper (for actual-size
copying only).
햿AUTOMATIC MAGNIFICATION SELECTION
Key ( page 38)
When you select the automatic magnification
selection (AMS) mode with this key and set
the desired copy size, the copier will auto-
matically detect the size of the original and
calculate the correct reproduction ratio.
헀CLEAR/STOP Key ( page 23)
Use this key to correct the copy quantity
entered or stop a multicopy run. During
multicopying, pressing this key once will stop
the copy run and pressing it twice will clear the
copy quantity to “1”.
헁PRINT Key ( page 24)
Press this key to start copying.
헂DIGITAL Keys
Use these keys to enter the desired number
of copies. Up to 999 copies can be set.
헃AUTO-EXPOSURE Key (page 44)
Normally, the auto-exposure mode is se-
lected. The copier will automatically detect
the density of the original and select the
optimum exposure for the original.
헄MANUAL EXPOSURE Keys
( page 44)
In the manual exposure mode, the desired
copy density can be selected. Pressing the
LIGHT key will lighten the copy in five
exposure steps and vice versa.
헅PHOTO Key ( page 45)
To make clear copies of photographs,use this
mode.
햸햹 햺 햻 햽
헂헁헀햿햾

14
3. DESCRIPTION OF THE MESSAGE DISPLAY
The Message Display panel shows operation statuses, error messages and function
menus one after another.
●ach function item displayed is shown in the form of a touch key. You can select or specify
the function by touching the key lightly with your finger.
●Touching one of the function items will show the next display.
The function items shown below can be specified on the Message Display panel.
햲햳 햴햵햶햷
햸
햹
햺
헁
햿
헀햻
햽
햾

DESCRIPTION OF THE COPIER
15
DESCRIPTION OF THE COPIER
햲햲
햲햲
햲Message
햳햳
햳햳
햳key
Use this key to return to the BASIC screen.
햴햴
햴햴
햴key
Use this key to select:
DG RAS ( Page 53)
DUAL PAG ( Page 48)
*2 IN 1 DUPL X ( Page 49)
*2 IN 1 ( Page 49)
IMAG SHIFT ( Page 56)
IMAG DITING ( Page 75)
*COV R SH T ( Page 78)
SH T INS RTION ( Page 82)
(*1) Displayed only when the optional
automatic document feeder is installed.
햵햵
햵햵
햵Paper Size
The paper size of the selected paper source
appears here. “APS MOD ” represents
Automatic Paper Selection mode ( Page 22)
햶햶
햶햶
햶Reproduction Ratio
The selected reproduction ratio appears here.
햷햷
햷햷
햷Copy Quantity ( Page 23)
The number of copies entered with the digital
keys is displayed here.
햸햸
햸햸
햸key
Use this key to confirm the set functions.
햹햹
햹햹
햹key
Use this key to select:
MOD M MORY ( Page 100)
DAT /TIM ( Page 94)
W KLY TIM R ( Page 93)
CONTRAST OF M SSAG DISPLAY
( Page 96)
*AUTOMATIC DOCUM NT F D R
( Page 25)
CASS TT SIZ ( Page 98)
UNIV RSAL ( Page 102)
AUTO START ( Page 106)
THICK PAP R ( Page 105)
(*2) Displayed only when the optional
automatic document feeder is installed.
햺햺
햺햺
햺KEY COPY COUNTER symbol
This symbol flashes when the optional key
copy counter is not inserted in the copier.
Insert it to make copies. ( page 89)
햻햻
햻햻
햻ORIGINAL DIRECTION symbol
ither of these symbols is lit according to the
direction of the paper in the selected cassette.
When placing originals on the glass or on the
original feed tray (optional), do so according
to the direction shown.
햽햽
햽햽
햽ADD PAPER symbol
This symbol flashes when the paper supply in
the optional large-capacity feeder runs out.
( page 120)
햾햾
햾햾
햾CASSETTE key
When the cassette selected is not the desired
size, press this key to select the cassette you
want. You can also press the desired casette
on the display directly to select it.
햿햿
햿햿
햿DUPLEX key ( Page 61)
Use this key to make 2-sided copies from 2-
sided (or book) or 1-sided originals. You can
also make 1-sided copies from 2-sided
originals.
(*3) Displayed only when the optional auto
duplexer is installed.
헀헀
헀헀
헀SORTER key ( Page 111)
Use this key to select the sort, group and
stapling modes.
(*4) Displayed only when the optional sorter
is installed.
헁헁
헁헁
헁DATE/TIME
The current date and time are shown.

16
4. DESCRIPTION OF THE GRAPHIC DISPLAY
The graphic display shows the status of the machine. When one of the graphic symbols flashes,
take the appropriate action referring to the page shown.
햽햽
햽햽
햽
햹햹
햹햹
햹
햻햻
햻햻
햻
햸햸
햸햸
햸
햺햺
햺햺
햺
햲햲
햲햲
햲햳햳
햳햳
햳
햵햵
햵햵
햵
햶햶
햶햶
햶
햷햷
햷햷
햷
햴햴
햴햴
햴

DESCRIPTION OF THE COPIER
17
DESCRIPTION OF THE COPIER
햸햸
햸햸
햸CLEAR PAPER symbol
This symbol flashes when a sheet of paper fed
from the selected pedestal cassette (optional)
is misfed in the paper feeding section. (
page 136)
햹햹
햹햹
햹CLEAR PAPER symbol
This symbol flashes when a paper misfeed
occurs in the automatic duplexing unit. (
page 133)
햺햺
햺햺
햺SORTER MISFEED symbol
This symbol flashes when a paper misfeed
occurs in the optional sorter. ( page 145~149)
햻햻
햻햻
햻CLEAR PAPER symbol
This symbol flashes when a paper misfeed
occurs on the paper path inside the copier. (
page 130~132)
햽햽
햽햽
햽REPLACE TONER BAG symbol
This symbol flashes when the used toner bag
becomes full of used toner. ( page 125)
햲햲
햲햲
햲CHECK ORIGINAL symbol
This symbol flashes when an original misfeeds
inside the optional automatic document feeder.
( page 143)
햳햳
햳햳
햳REPLACE TONER CARTRIDGE
symbol
This symbol flashes when the toner supply in
the cartridge runs out. ( page 127)
햴햴
햴햴
햴BYPASS MISFEED symbol
This symbol flashes when a sheet of paper is
not fed into the copier in bypass copying.
Remove and reset the sheets on the bypass
guide. ( page 35 and 142)
햵햵
햵햵
햵CLEAR PAPER symbol
This symbol flashes when a paper misfeed
occurs inside the copier. ( page 130)
햶햶
햶햶
햶STACK symbol
This symbol flashes when sheets of paper
copied on one side are stacked in the duplexer.
It also flashes when sheets of paper are left in
the duplexer. ( page 61)
햷햷
햷햷
햷CLEAR PAPER symbol
This symbol flashes when a sheet of paper
from any selected paper source is misfed in
the large capacity feeder (optional). ( page
138)

18
5. DESCRIPTION OF THE OPTIONAL EQUIPMENT
Work Tray
(KK-2060)
Automatic Document Feeder
Two types of optional automatic
document feeder are available:
MR-2008 and MR-3006A. They
automatically feed originals
placed on the original tray to have
them copied. The MR-3006A has
an additional function of reversing
the originals to have both their
sides copied.
Paper Feed Pedestal
Two types of optional paper feed
pedestals are available: KD-1003A
and KD-2009A. They have one and
two front-loading cassettes,
respectively. ach cassette holds
600 sheets of paper.
Key Copy Counter
(7-digit)
Copies made are
recorded according to
the particular
individual or group.
Automatic Duplexing Unit
MD-5002
Automatically reverses and
refeeds copies to help the copier
make duplex copies.
Large-Capacity Feeder MP-1501
With this unit installed, you will have an
additional paper source which can hold
up to 1,500 sheets of paper (64~80 g/m2).
Large-Capacity Feeder MP-4001
With this unit installed, you will
have an additional paper source
which can hold up to 4,000 sheets
of paper (64~80 g/m
2
).
Sorter MG-2010
A 20-bin console
type, it allows
STAPLING
besides NON-
SORT, SORT and
GROUP copying.
Sorter MG-2009
A 20-bin hanging
type, it allows
SORT and GROUP
copying as well as
NON-SORT
copying.
Sorter MG-1004
A compact 10-bin
sorter, it allows SORT,
GROUP and STAPL
copying as well as
NON-SORT copying.
Sorter MG-1003A
A compact 10-bin
sorter, it allows
SORT and GROUP
copying as well as
NON-SORT copying.
Sorter MG-2012
A 20-bin hanging
type, it allows
SORT, GROUP
and STAPL
copying as well as
NON-SORT
copying.