Toshiba B-SP2D Series User manual

TOSHIBA Portable Printer
B-SP2D SERIES
Owner’s Manual
Cover_TOSHIBA.p65 10/31/2005, 11:19 AM1

CE Compliance (for EU only)
ThisproductcomplieswiththerequirementsofEMC,LowVoltageandR&TTEDirectives
includingtheiramendments.
“ThisClassBdigitalapparatusmeetsallrequirementsoftheCanadianInterference-Causing
EquipmentRegulations.”
“CetappareilnumériquedelaclasseBrespectetouteslesexigencesduRèglementsurle
matérielbrouilleurduCanada.” (for CANADA only)
VORSICHT:
• Schallemission:unter70dB(A)nachDIN45635(oderISO7779)
• DiefürdasGerätVorgeseheneSteckdosemußinderNähedesGerätesundleichtzugänglich
sein.
Sometypesofthisproductareequippedwithawirelesscommunicationdevice,suchas,TEC-
BTM-RandTEC-WLM-R. PleasebesuretoreadtheenclosedPrecautionsforHandlingof
WirelessCommunicationDevicesbeforeusingthisproduct.
Copyright © 2006
by TOSHIBA TEC CORPORATION
All Rights Reserved
570 Ohito, Izunokuni-shi, Shizuoka-ken, JAPAN
FCC Notice
ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigitaldevice,
pursuanttoPart15oftheFCCRules. Theselimitsaredesignedtoprovidereasonableprotection
againstharmfulinterferenceinaresidentialinstallation. Thisequipmentgenerates,uses,andcan
radiateradiofrequencyenergyand,ifnotinstalledandusedinaccordancewiththeinstructions,
maycauseharmfulinterferencetoradiocommunications.
However,thereisnoguaranteethatinterferencewillnotoccurinaparticularinstallation. Ifthis
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interferencebyoneormoreofthefollowingmeasures:
• Reorientorrelocatethereceivingantenna.
• Increasetheseparationbetweentheequipmentandreceiver.
• Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiveris
connected.
• Consultthedealeroranexperiencedradio/TVtechnicianforhelp.
IrCOMM(9-wire)isatrademarkownedbyLinkEvolutionCorporationandisusedbyTOSHIBA
TECunderlincense.
IrDAProtocolStackDeepCoreTM ©LinkEvolutionCorp.AllrightReserved.
< For EU Only >
TOSHIBA TEC Europe Retail Information Systems S.A.
Rue de la Célidée 33 BE-1080 Brussels
Waste Recycling information for users:
Followinginformationis only forEU-memberstates:
Thecrossedoutwheeledbin symbol is usedtoindicatethattheproduct must not betreated
asgeneralhousehold waste. Byensuringthat this productisdisposed of correctlyyouwill
behelpingtopreventpotentiallynegativeconsequencesfortheenvironmentandhuman
health,whichcouldotherwise be causedby incorrectwastehandlingof this product.
Formoredetailedinformationabout the take-back andrecyclingofthisequipment,please
contactthesupplierthatprovided you with theproductinquestion.
Conformity_TOSHIBA.p65 10/31/2005, 11:19 AM1

- i -
EO1-33052
Safety Precautions
Precautions for Handling of Wireless Communication Devices
Bluetooth®Module: TEC-BTM-R (GH30 model)
Wireless LAN Module: TEC-WLM-R (GH40 model)
Trademark
Bluetooth is a registered trademark owned by Bluetooth SIG, Inc. and is
used by TOSHIBA TEC CORPORATION under license.
Cautions
General
For all countries and areas
This product is a wireless communication device, and the use of this
product is restricted to the following countries or areas. If the product is
used in the countries or areas other than the following, you may be
punished according to the laws of those countries or areas.
Japan, USA, Canada, Austria, Belgium, Cyprus, Czech Republic, Denmark,
Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Poland, Portugal, Slovakia, Slovenia, Spain,
Sweden, The Netherlands, United Kingdom, Switzerland, Norway, Iceland,
Liechtenstein, Australia, New Zealand
For Europe
Hereby, TOSHIBA TEC CORPORATION, declares that the TEC-BTM-R and
TEC-WLM-R are in compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC.
This equipment uses a radio frequency band that has not been harmonised
throughout all EU and EFTA countries, and can be used in the following
countries.
Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
The Netherlands, United Kingdom, Switzerland, Norway, Iceland,
Liechtenstein
Safety Precautions.p65 6/20/2006, 2:18 PM1

- ii -
EO1-33052
Safety Precautions
For USA
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
Changes or modification not expressly approved by manufacturer for
compliance could void the user’s authority to operate the equipment.
For Canada
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including
interference that may cause undesired operation of the device.
To prevent radio interference to the licensed service, this device is intended
to be operated indoors and away from windows to provide maximum
shielding. Equipment that is installed outdoors is subject to licensing.
For safety
Do not use this product in locations where use may be forbidden, for example,
inanaeroplaneorahospital.Ifyoudonotknowtheforbiddenareas,pleaserefer
to and follow the airline company or medical institution guidelines.
Flight instrument or medical equipment may be affected, causing a serious
accident.
Since this product uses extremely low power compared with mobile phones, it
cannotpossiblyinterferethepacemakersanddefibrillators.However,ifthe use
of this product should be likely to have affected the pacemaker or defibrillator,
immediatelystopusingtheproductandcontactyourTOSHIBATECsalesagent.
Safety Precautions.p65 10/31/2005, 11:32 AM2

- iii -
EO1-33052
Safety Precautions
Do not disassemble, modify, or repair the product. Doing so may cause
injury. Also, modification is against the Laws and Regulations for Radio
Equipment. Please ask your TOSHIBA TEC sales agent for repair.
Precautionin use
This product communicates with other devices by radio. Depending on the
installation location, orientation, environment, etc., its communication
performance may deteriorate or devices installed near by may be affected.
Keep away from a microwave.
Communication performance may deteriorate or a communication error may
occur due to the radio emitted from a microwave.
Since the Bluetooth and wireless LAN use the same radio frequency band,
each radio wave may interfere with each other when they are used at the
same time, causing a deterioration of communication performance or a
disconnection of network. If there is any problem with connection, please
stop using either Bluetooth or wireless LAN.
Do not use the product on a metal table or near a metal object.
Communication performance may be deteriorated.
TEC-BTM-RSpecification
•Bluetooth class 2
• Built-in protocol stack activated by Bluetooth V1.2 serial port profile
•Operating temperature: -5 to 50°C 25% to 85%RH (No condensation)
• Dimensions: 38.1 mm (W) x 25.4 mm (H) x 7 mm (D)
TEC-WLM-R Specification
• Built-in IEEE802 Part 11b/g (802.11b/g)
• Operating temperature: -5 to 50°C 25% to 85%RH (No condensation)
• Dimensions: 67.8 mm (W) x 36.8 mm (H) x 7.5 mm (D)
Safety Precautions.p65 10/31/2005, 11:32 AM3

- iv -
EO1-33052
Safety Precautions
Changesor modificationsnot expresslyapproved bymanufacturer for
compliancecouldvoidtheuser'sauthoritytooperatetheequipment.
CAUTION!
1. To avoid injury, be careful not to catch or jam your fingers while
openingorclosingthecover.
2. Donottouchmovingparts. Toreducetheriskthatfingers,jewellery,
clothing,etc.,bedrawnintothemovingparts,turnoffthepowerswitch
tostop movement.
Safety Summary
Personalsafetyinhandlingor maintainingtheequipment isextremely
important. Warnings and Cautions necessary for safe handling are
included in this manual. All warnings and cautions contained in this
manual and written inside or outside of the printer should be read and
understoodbeforehandlingormaintainingtheequipment.
Donotattempt toeffectrepairs tothis equipment. Ifafaultoccursthat
cannotberectifiedusingtheproceduresdescribedinthismanual,turn
offthepower,thencontactyourauthorisedTOSHIBATECrepresentative
forassistance.
SafetyPrecautions
This Owner's Manual and the products (machines) which you have
purchasedcontainindicationswhichshouldbeobservedinordertouse
themachinessafelyandpreventharmtoyourselfandothersanddamage
toproperty. Themeaningsoftheseindicationsandsymbolsaregiven
below.
Readtheseindicationsandbecomefamiliarwiththeircontentsbefore
readingthisOwner'sManual.
Safety Precautions.p65 10/31/2005, 11:32 AM4

- v -
EO1-33052
Safety Precautions
This indicates that there is the risk of death or
seriousinjuryifthemachinesarehandled
improperlyorcontrarytothisindication.
•Ifwateroranyother liquidenters themachine,turnoffthe power.
Continuoususeofthemachineundersuchconditionsmaycause
fireorelectric shock.
•Iftheenclosureisdamaged whendroppedor subjecttoshock, turn
offthepower. Continuoususe ofthe machineunder suchconditions
maycausefireorelectric shock.
•Avoidcontinuousexposuretodirectsunlightorhightemperatureas
thismaycausefire.
•Donotremovecoversormodifythemachinebyyourself. Doingso
maycausefireorelectric shock.
•Avoidwater,operationwithwethandsorcleaningwithamoistenedcloth.
Failuretodo thismaycausefire orelectricshock.
•Do not wipe the machine with a cloth moistened with thinner or other
volatilesolventasthismaycausefireorelectricshock.
•Usethespecifiedbatteryonly. Failuretodothismaycausefireorelectric
shock.
•Dangerofexplosionifthebatteryisincorrectlyreplaced. Replacethe
batteryonlywithTOSHIBATECCORPORATION,BatteryPackModel
B-SP2D-BT,7.4 V1400 mAhLi-ion.
Discardusedbatteriesaccordingtothemanufacturer'sinstruction.
•ATTENTION:
IIyadengerd'explosions'ilyaremplacementincorrectdelabatterrie.
Remplaceruniquementavecune batteriedu mêmetypeou d'untype
équivalentrecommandéparleconstructeur.
Mettreaurebutlesbatteriesusagéesconformémentauxinstructionsdu
fabricant.
•Donotdisassembleandmodifythebatterybecauseithasaprotection
unitinit. Doingsomaybreaktheprotectionunit,causingthebatteryto
heatup, burstorburn.
•Ifthebatterygetswet,dryitcompletely. Usingawetbatterymaycause
fireorelectric shock.
WARNING
Safety Precautions.p65 10/31/2005, 11:32 AM5

- vi -
EO1-33052
Safety Precautions
•Beawareofthefollowingprecautionswhenusingbatteries. Otherwise
theycouldheatup,burst orburn.
■Donotthrowthebatteryintofireorheatitwithamicrowaveoroven,
etc.
■Donotloadthebatterywiththeelectrodesreversed.
■Donotconnecttheelectrodeswith metalobjectslike wire. Donot
carryorstorethebatteryalongwithmetalobjectssuchasnecklaces,
hairpins,etc.
■Donotstickaneedleinto,hammer,stepon,ordropthebattery.
■Donotsolderthebattery.
■Do not leave the battery where the temperature is more than 60°
centigrade,such asinsidea carorin directsunlight.
This indicates thatthere is therisk of personal injury
ordamagetoobjectsifthemachinesareimproperly
handledcontrarytothisindication.
CAUTION
•Keepawayfrom flameor othersources ofheat. Failuretodothis
maycausefireormachinefailure.
•Donotdroporshock themachine asthis maycause machine
failure.
•Duringlightning,turnoffandkeepawayfromthemachine
becauseofdangerofelectricshockandmachinefailure.
•Avoidlocationssubjecttorapidchangeintemperatureasthis
causescondensation,causingelectricshockormachinefailure.
•Donotdamagetheprinthead,platen orstriprollerwith asharp
object. Doingsomaycausemachinefailure.
•Donottouchorcontacttheprintheadelementwithametalobject.
Doingsomaycausemachinefailure.
• Usethespecifiedmediaonly. Failuretodothismaycausemachine
failure.
• Besuretoturnoffthemachinebeforereplacingthebattery,or
machinefailuremayoccur.
Safety Precautions.p65 10/31/2005, 11:32 AM6

- vii -
EO1-33052
Safety Precautions
• Donotchargethebatterynearflameorunderdirectsunlight. High
temperaturemayactivateordamagetheprotectionunitofthebattery,
disabling theelectricchargeorcausingittooverheat,burst,orburn.
• Unloadthebatterywhenthemachinewillnotbeusedforalong
time. Failuretodothismaycausemachinefailure.
• Keepthebatteryawayfromflame,aheatsourceorotherlocations
subjecttohightemperature.
Failuretodothismaycauseittooverheatorburn.
• Usethespecifiedbatterychargeronly. Failuretodothismaycause
thebatterytooverheat,burstorburn.
• Donotforcethebatteryintothemachineorbatterycharger. Doing
somaycausethebatterytooverheat,burstorburn. Checkforthe
correctelectrode.
• Donotconnectthebatterytoapoweroutletoracarcigarettelighter
jackasthismaycausethebatterytooverheat,burstorburn.
• BecausetheB-SP2D-BTbatteryisexclusivelyfortheB-SP2Dprinter,
donotusethebatteryinothermachines. Doingsomaydamage
the batteryoraffecttheperformanceandlifeofthebattery.
Precautions
The following precautions will help to ensure that this machine will
continuetofunctioncorrectly.
(1) Trytoavoidlocationsthathavethefollowingadverseconditions:
* Temperaturesbelow-5°Candabove40°C
* Directsunlight
* Excessivevibration
(2) Thecovershould becleanedbywiping withadry clothora cloth
slightly dampened with a mild detergent solution. NEVER USE
THINNERORANYOTHERVOLATILESOLVENTontheplastic
covers.
(3) USE ONLY TOSHIBA TEC SPECIFIED media.
Safety Precautions.p65 10/31/2005, 11:32 AM7

- viii -
EO1-33052
Safety Precautions
(4) DO NOT STORE the media where it might be exposed to direct
sunlight,hightemperatures,highhumidity,dust,orgas.
(5) Anydatastoredinthememoryoftheprintercouldbelostduringa
printerfault.
(6) DONOTopenthemediacoverandbatterycoverduringoperation.
Doingsowillstopprinteroperation.
(7) DO NOT scratch the surface of printed labels or receipt with a
sharpobject.
Safety Precautions.p65 10/31/2005, 11:32 AM8

EO1-33052
TABLE OF CONTENTS
Page
1. INTRODUCTION ............................................................... 1-1
1.1 APPLICABLEMODEL .............................................. 1-2
1.2 ACCESSORIES........................................................ 1-2
2. SPECIFICATIONS............................................................ 2-1
2.1 PRINTER .................................................................. 2-1
2.2 SERIALINTERFACE(RS-232C).............................. 2-2
2.3 BLUETOOTHINTERFACE ...................................... 2-2
2.4 WIRELESSLANINTERFACE .................................. 2-3
2.5 IrDAINTERFACE ..................................................... 2-3
2.6 BATTERY ................................................................. 2-4
2.7 MEDIA ...................................................................... 2-5
3. APPEARANCE ................................................................. 3-1
3.1 FRONT VIEW ........................................................... 3-1
3.2 INTERIOR................................................................. 3-2
3.3 OPERATIONPANEL................................................ 3-2
4. INSTALLINGTHEPRINTER............................................ 4-1
4.1 LOADING THE BATTERY ........................................ 4-1
4.2 INSTALLING THE MEDIA GUIDE ............................ 4-3
4.3 INSTALLING THE MEDIA GUIDE
FOR OUTSIDE WOUND PAPER ........................ 4-5
5. LOADING THE MEDIA ..................................................... 5-1
6. SECURING THE PRINTER TO YOUR WAIST................ 6-1
Table of contents.p65 10/31/2005, 11:22 AM1

EO1-33052
CAUTION!
1. Thismanualmaynot becopiedinwholeorinpartwithoutthepriorwritten
permission of TOSHIBA TEC.
2. The contents of this manual may be changed without notification.
3. PleaserefertoyourlocalAuthorisedServicerepresentativewithregardto
any queries you may have in this manual.
7. CONNECTING THE SERIAL INTERFACE CABLE ......... 7-1
8. ISSUING THE MEDIA ...................................................... 8-1
9. CARE/HANDLING OF THE MEDIA ................................. 9-1
10. GENERALMAINTENANCE ........................................... 10-1
10.1 CLEANING ............................................................. 10-1
10.2 COVERS................................................................. 10-3
10.3 REMOVINGJAMMED MEDIA................................ 10-3
11. TROUBLESHOOTING ................................................... 11-1
Table of contents.p65 10/31/2005, 11:22 AM2

1- 1
EO1-33052
1. INTRODUCTION
1.INTRODUCTION
1. INTRODUCTION
Thank you for purchasing the TOSHIBA B-SP2D series portable printer.
This printer displays its high performance with extraordinarily high speed
printing up to 80 mm/sec. It has a considerably compact and light body -
44mminheight,114mminwidthand91mm*indepth,weighingabout380g*.
(*:For theGH40 model,101 mmindepth and410 gin weight.)
BesidestheRS-232C,IrDA,Bluetooth,andwirelessLANwhichrequireno
cablefordatatransmissionbetweenahandyterminalandtheprinterare
adoptedasdatacommunicationmethod.
Owingtoalowpowerconsumptiondesignanduseofachargeablelithium-ion
batteryasapowersource,thisprintercanissuemax.650piecesof40-mmpitch
labelswithafully-chargedbattery.(Thenumberoflabelsvariesdependingon
theoperatingenvironment,printcondition,etc.)
Anautomaticpowerofffunctionallowsobtainingthebatterydrivingtimetothe
maximum. Therearefourchoicesofthesettingtime:1minute,5minutes,30
minutesand120minutes.
Loadingalabelrollisverysimple;justputalabelrollintotheprinterandclose
themediacover. Abeltholderprovidedontherearoftheprinterenablesthe
printertobeheldhands-freeatyourwaistforimprovedproductivity.
Thismanualcontainsgeneralset-upandmaintenanceinformationandshould
bereadcarefullytohelpgainmaximumperformanceandlifefromyourprinter.
For most queries please refer to this manual and keep it safe for future
reference.
Section 1.p65 10/31/2005, 11:35 AM1

1- 2
EO1-33052
1. INTRODUCTION
1.1 APPLICABLEMODEL
•B-SP2DSeries
Modelnamedescription
B - S P 2 D - G H 2 0 -Q M - R
1.1 APPLICABLE MODEL
Interface
20: IrDA + RS-232C
30: IrDA + Bluetooth
40: IrDA + Wireless LAN
Print mode
H: Batch/Strip mode
Dot density of the print head
G: 8 dots/mm
Destination
1.2 ACCESSORIES
Owner’s Manual (1 copy)
Belt Holder (1 pc.) Media Guide for Outside
Wound Paper (1 pc.) Cable Clamp (1 pc.) (GH20 model only)
Battery (1pc.) Media Guide (2 pcs.)
SMW-3x8 Screw (2 pcs.) SMW-3x8 Screw (1 pc.)
(GH20 model only)
Ferrite Core (1 pc.)
(GH20 model only)
RoHScompliant
Section 1.p65 10/31/2005, 11:35 AM2

2- 1
EO1-33052
2. SPECIFICATIONS
2.1 PRINTER
2. SPECIFICATIONS
2.1 PRINTER Description
GH20/30 model: 114mm (W) x 91mm (H) x 44mm (D)
GH40 model: 114mm (W) x 101mm (H) x 44mm (D)
GH20/30 model: Approx. 380 g (Including a battery)
GH40 model: Approx. 410 g (Including a battery)
-5°C to 40°C
25% to 85% RH (No condensation)
Batch mode/Strip mode
Thermal print head
Thermal direct
8 dots/mm (203 dpi)
12.5 mm/sec.to 80 mm/sec. (NOTE 1)
48 mm
Standard characters and characters under bar codes
(12x24 dots), Bold characters ( 48x96 dots), Writable
characters (16x16 dots, 24x24 dots), Price Font1
(16x40 dots), Price Font2 (32x48 dots), Letter Gothic
(14.3 point), Presentation (27 point), Helvetica Medium
(9, 15, 18 point), Helvetica bold (18, 21 point),
Helvetica Italic (18 point), Times New Roman Medium
(12, 15, point), Times New Roman Bold (15, 18, 21
point), Times New Roman Italic (18 point), Prestige
Elite Medium (10.5 point), Prestige Elite Bold (15
point), Courier Medium (15 point), Courier Bold (18
point), OCR-A (12 point), OCR-B (12 point),
GOTHIC725 Black (6 point)
TEC Font1, TEC Font1 (Proportional), Price Font
NW7, EAN 8, EAN 13, JAN 8, JAN 13, UPC-A, UPC-E,
CODE 39, Interleaved 2 of 5, EAN128, CODE128, MSI,
RSS, Customer Bar Code
QR Code, PDF417, Data Matrix, Maxicode, Micro
PDF417
Item
Dimensions
Weight
Operating Temperature
Operating humidity
Print mode
Print head
Print method
Print head dot density
Print speed
Effective print width
Font(NOTE2)
Outline Font (NOTE 2)
Bar code types
2-dimensional code(NOTE 3)
Section 2.p65 10/31/2005, 11:36 AM1

2- 2
EO1-33052
2. SPECIFICATIONS
Description
GH20model: IrDA+RS-232C
GH30model:IrDA+Bluetooth
GH40 model: IrDA + Wireless LAN
Lithiumionbattery7.4V1400mA(nominal)
Item
Interface
Powersource
2.2 SERIAL INTERFACE (RS-232C)
ThefollowingspecificationisapplicableonlytotheGH20model.
Item
Baudrate
Protocol
Signals
Description
9600~115,200 bps
XON/XOFF,8bitdata,Evenparity,Nonparity,
Start bit = 1 bit, Stop bit = 1 bit
TXD,RXD
NOTES: 1. Print speed automatically changes depending on the operating temperature, head
temperature, and battery voltage.
2. Some fonts and bar codes are not available depending on the print mode.
3. Some two-dimensional codes are not available depending on the print mode.
Item
Type
Supportprofile
Radioclass
Communicationmethod
Communicatingdistance
Datacode
Transmissioncontrol
Operatingmode
Description
2.3 BLUETOOTH INTERFACE
ThefollowingspecificationisapplicableonlytotheGH30model.
Bluetooth V1.2
SerialPortProfile
Class 2
Bi-directional(Half-duplex)
3m(360degreesangle)
JIS 8 code, Shift JIS code
CreditBasedFlowControl
Slavemode
2.2 SERIAL INTERFACE (RS-232C)
Section 2.p65 10/31/2005, 11:36 AM2

2- 3
EO1-33052
2. SPECIFICATIONS
Item
Type
Transmission speed
Communicabledistance
Peak wavelength of
the infrared ray
Communicableangle
Ambientlightimmunity
Protocol
Datacode
Errordetection
Transmissionprotocol
2.5 IrDA INTERFACE
2.4 WIRELESS LAN INTERFACE
Description
Physical layer conforming to IrDA-SIR V1.2
(Low Power)
9,600 ~ 115,200 bps
0.1 m max.
870 nm
±15 degrees max.
1,000 lx max. (under a fluorescent lamp or
incandescentlamp)
Start-stopsynchronisation,Halfduplex
transmission
Start bit = 1 bit, Stop bit = 1 bit, 8 bit data,
Nonparity
JIS 8 code, Packed BCD code, Shift JIS code
CRC (16 bits),
GeneratingpolynomialX16+X12+X5+1
TEC Protocol, Ir COMM (9-WIRE)
2.4 WIRELESS LAN INTERFACE
ThefollowingspecificationisapplicableonlytotheGH40model.
Item
Communicationmethod
Supportingprintprotocol
Communicabledistance
Clientprotocol
Security protocol
Flow control
Antenna
Parameter setting
Description
IEEE802.11b/g
Socket/LPR
100m (Whenthere isnoobstacle.)
DHCP, WINS
WEP (40 bits/104 bits), MD5/EAP,
WPA-PSK(TKIP)
TCP/IP
Built-in
Via HTTP, via IrDA
Section 2.p65 6/20/2006, 2:19 PM3

2- 4
EO1-33052
2. SPECIFICATIONS
2.6 BATTERY
Item
Type
Voltage
Capacity
Description
Lithium-ionbattery
DC7.4V
1400mAh
2.6 BATTERY
Section 2.p65 10/31/2005, 11:36 AM4

2- 5
EO1-33052
2. SPECIFICATIONS
2.7 MEDIA
2.7 MEDIA
Label
Feeddirection
BlackMark(onreverseside)
Tag/Receipt
G
D
C
H
I
E
A
B
H
D
G
E
A
B
F
Section 2.p65 10/31/2005, 11:36 AM5

2- 6
EO1-33052
2. SPECIFICATIONS
2.7 MEDIA
Media
Item
Label/Receipt pitch
Label/Receipt length
Backing paper
width
Gap/black mark
length
Distance between the
label edge and the
backing paper edge
Effective print width
Effective print length
Margin
Outer roll diameter
Roll direction
Strip modeBatch mode
(Unit:mm)
NOTES:
1. Do not use the media other than the above to ensure print quality and print head life.
2. 28.0 mm and 31.0 mm are not applicable to the media rolled outside.
3. This specification is applicable only to the media rolled inside. For media rolled outside, the
specification is 31.0 mm - 55.0 mm.
A
B
C
E
D
F
H
G
I
28, 31, 34, 37, 40, 43, 46,
49,52, 55, 58±0.5(NOTE 2)
13.0 −67.0
10.0 −60.0
10.0 −167.0
7.0 −160.0
Label Receipt
With black mark No black mark
10.0 −507.0
7.0 −500.0 Variable
Variable
28, 31, 34, 37, 40, 43, 46, 49,
52,55, 58±0.5(NOTE2)
7.0 - 500.0
3.0 - 7.0
Variable
1.5 −7.0
48.0
∅36 (max.)
Either is acceptable
25.0 −55.0(NOTE 3)
3.0 −7.0
7.0 −160.0
Media width
7.0 −60.0
Tag/Receipt
1.0 (gap = 7 mm) −5.0 (gap=3 mm)
Section 2.p65 10/31/2005, 11:36 AM6