Totally Wicked Skope P User manual

USING YOUR SKOPE P
Filling the Cartridge
Remove the cartridge by pulling straight out of the
Skope P. Locate the rubber ap on the side of the
cartridge, and lift the edge marked with an arrow
symbol. With the lling hole now exposed, insert your
e-liquid bottle nozzle fully, and ll to leave a minimum
air gap of approximately 2mm. Close the lling point
and reinsert the cartridge rmly into the Skope P.
Note: After lling a new cartridge, it
is recommended to wait 5 minutes
to ensure the atomizer head is fully
saturated.
Vaping:
Simply inhale gently on the cartridge mouthpiece of the Skope P and it will
begin to produce vapour. The LED in the centre of the device will illuminate
while the device is activated.
Battery Level Indication:
Approximately one second after you
nish inhaling, the LED will relight
to show the battery’s approximate
remaining charge as detailed in the
table opposite.
Charging the Battery
To charge the battery, connect the USB cable into the charging port on the side
of the Skope P. The LED will glow until fully charged, at which point it will turn
o.
USER MANUAL
CONGRATULATIONS ON PURCHASING YOUR
TOTALLY WICKED SKOPE P ELECTRONIC CIGARETTE KIT
Charging
Port
Cartridge
LED
Filling
Point
1 2 3
Battery
Percentage
LED
Condition
100-50% Stays green
49-20% Stays red
19-1% Flashes red

Changing the Cartridge
The Skope P cartridge will require
renewal periodically, and we
recommend it is changed for a new
one after each 20-30ml of e-liquid
consumed.
Short Circuit Protection
If a short circuit occurs before you
inhale on the Skope P, the LED
will ash continuously. Changing
the cartridge should allow normal
operation to resume. Follow the
steps outlined in Changing the
Cartridge above.
Atomizer Protection
If the Skope P is operated
continuously for longer than
10 seconds the device will stop
producing any vapour and the LED
will ash once. Normal operation
should resume on the next
attempted use.
Kit Contents
1 x Skope P battery
2 x Skope P cartridges
1 x USB Cable
1 x User Manual
Specications
Dimensions: 90.0mm (length) x
29.0mm (width) x 12.0mm (depth)
Battery capacity: 480mAh
Weight: 57.5g
Tank capacity: 2ml
Output modes: Regulated constant
voltage – automatic switch
Max charging current: 1.0A
Airow type: Non-adjustable
Filling method: Side ll
Atomizer Resistance Capability:
0.8ohm - 3.0ohm
Maximum Filling Nozzle Diameter:
3mm
ADDITIONAL PRODUCT
INFORMATION
There are no reported medical side
eects with this product. If you
believe you experience a side eect,
please contact the manufacturer.
PRODUCT STORAGE AND BATTERY
PRECAUTIONS
• Store the Skope P and its
accessories away from children
when not in use.
• Please only use the charging cable
provided.
• Please dispose of dead batteries
in accordance with your country’s
appropriate legislation.
• Do not charge the battery in a damp
environment, or in temperatures
under 0°C or above 45°C.
• Do not use the device in
temperatures under -10°C or above
60°C.
• Do not carry batteries in a pocket or
bag with other metallic objects.
• Do not attempt to repair a faulty
Skope P battery as these are sealed
units with no serviceable parts.
Attempted repairs will void the
warranty.
WARRANTY
The Skope P components have a
28-day parts warranty, with the
exception of cartridges, which are
consumable items and covered by
“dead on arrival” warranty only. The
USB cable supplied has a 12-month
warranty. If any parts are found to be
faulty within this time please contact
our customer service team, whose
details are below and we will arrange
for a replacement. We may require
the goods to be returned for further
investigation.
Manufactured in China under the authority
of Pillbox38 UK Ltd, Stanclie Street,
Blackburn, Lancashire, BB2 2QR.
Tel [phone] www.totallywicked.co.uk
Tel [phone] www.totallywicked.com
Tel [phone] www.totallywicked.de