Totally Wicked Forza 75 User manual

ELECTRONIC CIGARETTE BODY
USER MANUAL / BEDIENUNGSANLEITUNG
TW_Forza75_Manual.indd 1 16/06/2016 15:33

2 3
Congratulations on purchasing your
Totally Wicked Forza 75 Electronic Cigarette.
The Totally Wicked Forza 75 succeeds the vastly popular Forza VT60. The Forza 75 retains
the style and exceptional functionality of its predecessor, whilst providing a higher power
output of 75 Watts and utilising an enhanced temperature control system, allowing you to
finely tune your device to suit your vaping style. Additionally, upgradeable firmware means
that you will always be up to date. The user is provided with six modes of vaping operation;
Variable Power (W); Variable Temperature with Nickel Coils (Ni); Variable Temperature with
Titanium Coils (Ti); Variable Temperature with Stainless Steel Coils (SS316); Temperature
Coefficient of Resistance (TCR), Start and Bypass. The adjustable modes allow for
incremental settings in terms of watts or temperature. The Forza 75 presents the all new
custom logo and game modes, along with adjustable date and time display. This device
combines all of its functionality and 18650 battery in a sleek and ergonomic, yet simple to
use package, suitable for all electronic cigarette users.
510 Thread and
spring connector
Left and right
adjustment buttons
Micro USB charging port
Power button
OLED Display
TW_Forza75_Manual.indd 2-3 16/06/2016 15:33

4 5
Using your Forza 75 Using your Forza 75
Power On and Off:
The Forza 75 uses a 5-click on/
off function. To switch the device
on, press the power button 5
times in quick succession. The
OLED screen will illuminate,
signifying that the device is
powered on. If the Forza 75 is
powered on the user can press
the button 5 times to switch the
device off.
Vaping:
Simply press the power button
as you inhale.
New Atomizer Installation:
When a new atomizer is
connected, or the existing
atomizer is disconnected and
reconnected, a message prompt
may be displayed – ‘New Coil
Right, Same Coil Left’. Press
the right adjustment button to
confirm that a new atomizer
has been connected, or the left
adjustment button to confirm
that the existing atomizer has
been reconnected. Selection of
a new coil should only be made
when the atomizer and coil are at
room temperature.
Charging the Battery:
Charge the Forza 75 via the USB cable
when connected to a powered USB port
or suitable wall adapter. The indicator on
the display will indicate the battery status
and will disappear when fully charged.
Alternatively, the 18650 battery can be
removed from the device and charged
using a suitable external charging unit.
Battery Charge:
The battery charge for the internal battery
is displayed on the fifth row of the OLED
display.
TW_Forza75_Manual.indd 4-5 16/06/2016 15:33

6 7
Using your Forza 75 Using your Forza 75
Shift between VT/TCR/VW/Bypass/
Start/Clock Modes:
When powered on, press the power button
3 times consecutively, the first row will flash,
use the right adjustment button to cycle
through the VT/TCR/VW/Bypass/Start/
Clock modes.
VW and Start Mode:
When in VW or Start mode, use the right
or left adjustment buttons to increase or
decrease the level of wattage respectively.
The available wattage range is 1W – 75W in
increments of 1W. Start mode displays the
power level graphically, as well as showing
the usual maximum power level suitable for
the BF atomizer range.
VT Mode (Ni/Ti/SS316):
To shift between Ni/Ti/SS316, when in
VT mode press the power button 3 times
consecutively, the first row will flash. Press
the left adjustment button and the Ni/Ti/
SS316 symbol will flash. Use the right
adjustment button to shift between the
Ni/Ti/SS316 modes. When in VT mode,
use the right or left adjustment buttons
to increase or decrease the temperature
respectively. The available temperature
range is 100-315°C or 200-600°F and can
be adjusted in increments of 5°C and 10°F.
To adjust the wattage level whilst in VT
mode, press the power button 3 times
consecutively to activate the menu, press
the left adjustment button twice and the
wattage (PWR) value will flash, use the right
adjustment button to adjust the wattage
level.
To lock/unlock the atomizer resistance,
press the power button 3 times in quick
succession to activate the menu, press
the left adjustment button three times
and the atomizer value will flash, use the
right adjustment button the lock/unlock
the atomizer resistance. Note: Only lock
the atomizer when the coil is at room
temperature.
Note: If a coil with a resistance exceeding
1.5ohms is applied in VT mode, the device
will automatically switch to VW mode. Also,
if a standard kanthal coil is used under VT
mode, the device will automatically switch
to VW mode.
TW_Forza75_Manual.indd 6-7 16/06/2016 15:33

8 9
Using your Forza 75 Using your Forza 75
TCR Mode:
When in TCR mode and the title is flashing
indicating that the menu is active, press the
left adjustment button once and the sub-
menu (M1, M2 and M3) will flash. Whilst the
sub-menu is flashing press the right button
to shift between M1, M2 and M3, then press
the power button to confirm. (Also see:
Configuring TCR Mode)
Configuring TCR Mode:
To set the temperature coefficient of resistance to match a particular
coil, when the device is powered off simultaneously hold the power
button and the right adjustment button to enter the TCR configuration
menu.
Use the right or left adjustment buttons to select which to configure
from M1, M2 and M3 – this feature allows the TCR values for 3
materials to be stored to the device. Press the power button to select
the TCR value and then use the right and left adjustment buttons
to increase or decrease the value to your preference, long press
the power button or leave the device for 10 seconds to confirm the
selection.
TW_Forza75_Manual.indd 8-9 16/06/2016 15:33