Totally Wicked Corsa User manual

1
ELECTRONIC CIGARETTE KIT
user manual

2 3
Congratulations on purchasing your
Totally Wicked Corsa Electronic Cigarette.
The Totally Wicked Corsa is a stylish, highly functional, and high power e-cigarette
design incorporating an intelligent temperature control system, allowing you to finely
tune your device to suit your vaping style, additionally, upgradeable firmware means
that you will always be up to date.
The user is provided with five modes of operation; variable power (W); variable
temperature with nickel coils (Ni); variable temperature with titanium coils (Ti);
variable temperature with stainless steel coils (SS316); and temperature coefficient
of resistance (TCR). Each adjustable mode allows for incremental settings in terms of
watts, temperature and temperature coefficient of resistance respectively.
The Corsa combines all of its functionality and dual 18650 Li-batteries in a sleek and
ergonomic, yet simple to use package, suitable for all intermediate to advanced
electronic cigarette users.
Totally Wicked Corsa
A 510 Thread with spring
connector
B Micro USB Charging Port
C Power Button
D OLED Screen
E Adjustment Button
A
BC
E
D

4 5
Using your Corsa Using your Corsa
Fitting Batteries:
The Corsa utilises dual 18650 Li-
batteries. To fit the battery simply slide
the locking switch on the bottom of the
device and insert two 18650 batteries,
ensuring the correct polarity. To close
the hatch push it firmly into position and
a positive ‘click’ will indicate that it is
securely closed.
Power On and Off:
The Corsa uses a 5-click on/off function.
To switch the device on quickly press
the power button 5 times. The OLED
screen will illuminate, signifying that the
device is powered on. Once the Corsa
is powered on the user can press the
button 5 times to switch the device off.
Vaping:
Simply press the power button as you
inhale.
Shift between VW/VT-Ni/VT-Ti/VT-
SS316/TCR Modes:
When powered on, press the power
button 3 times consecutively, the first
row will flash indicating that the right
adjustment button may be used to cycle
through the VW/VT-Ni/VT-Ni /VT-SS316/
TCR modes.
VW Mode:
When in VW mode, use the left or
right adjustment buttons to decrease
or increase the level of wattage
respectively. The available wattage
range is 1W – 150W.
RIGHTLEFT

6 7
Using your Corsa
VT Mode (Ni/Ti/SS316):
When in VT mode, use the left or right
adjustment buttons to decrease or
increase the temperature respectively.
The available temperature range is
100-315°C or 200-600°F and can be
adjusted in increments of 5°C and 10°F.
To adjust the wattage level whilst in VT
mode, press the power button 3 times
quickly to activate the menu, press the
left adjustment button once and the
wattage (PWR) value will flash, use the
right adjustment button to adjust the
wattage level.
To lock/unlock the atomizer resistance,
press the power button 3 times quickly
to activate the menu, press the left
adjustment button twice and the
atomizer value will flash, use the right
adjustment button to lock/unlock the
atomizer resistance. Note: Only lock
the atomizer when the coil is at room
temperature.
Note: If a coil with a resistance
exceeding 1.5ohms is applied in VT
mode, the device will automatically
switch to VW mode. Also, if a standard
kanthal coil is used under VT mode,
the device will automatically switch to
VW mode. RIGHT RIGHT

8 9
Using your Corsa
Configuring TCR Mode:
When in TCR mode and the title is
flashing indicating that the menu is
active, press the left adjustment button
once and the sub-menu (M1, M2, M3)
will flash.
Whilst the sub-menu is flashing press
the right button to shift between M1, M2
and M3, then press the power button
to confirm. (Also see: Configuring TCR
Mode)
Configuring TCR Mode:
To set the temperature coefficient
of resistance to match a particular
coil, when the device is powered off
simultaneously hold the power button
and the right adjustment button to enter
the TCR configuration menu.
Use the right or left adjustment buttons
to select which to configure from M1,
M2 and M3 – this feature allows the
TCR values for 3 materials to be stored
to the device. Press the power button
to select the TCR value and then use
the adjustment buttons to increase or
decrease the value to your preference,
long press the power button or leave
the device for 10 seconds to confirm
the selection.
TCR Value Range
Material TCR Value Range
Nickel 600-700
NiFe 300-400
Titanium 300-400
SS
(303, 304, 316, 317) 80-200
Note: The TCR value displayed is the multiple of the
actual TCR value and is for Corsa usage only.

10 11
Using your Corsa Using your Corsa
Current Display:
The real-time current (AMP) is displayed
on the screen on the fourth row whilst
the power button is pressed.
Battery Charge:
The individual battery charge for each of
the dual 18650 batteries is displayed on
the fifth row of the display.
Display Modes:
When powered off, hold both
adjustment buttons to turn the display
through 180°. Two display states are
available.
Stealth Mode:
When powered on, simultaneously
hold the power button and the left
adjustment button to activate stealth
mode. Repeat the process to deactivate
stealth mode.
Key Lock Mode:
When powered on, simultaneously
hold the two adjustment buttons for
3 seconds to activate key lock mode.
Repeat the process to deactivate the
key lock mode.
Charging the Batteries:
Simply charge the Corsa via the USB
cable connected to a powered USB port
or suitable wall adapter. The indicator
on the display will indicate the battery
status.
Charge Error:
If no charging current is detected when
the device is connected to the charging
lead, ‘Charge Error’ will be displayed.

12 13
Using your Corsa Using your Corsa
Check USB Adapter:
If the voltage of the USB adapter is 5.8V
or higher, ‘Check USB Adapter’ will be
displayed on the screen when either
the charging lead is connected or the
power button is pressed.
Replacing the Battery:
To replace the 18650 batteries, simply
slide the locking switch on the bottom
of the device and remove both 18650
batteries. Insert two 18650 batteries,
ensuring the correct polarity. To close
the hatch push it firmly into position and
a positive ‘click’ will indicate that it is
securely closed.
Imbalanced Batteries:
If the voltage difference between
the two cells reaches 0.3V or higher,
‘Imbalanced Batteries’ will be displayed
when the charging lead is connected.
New Atomizer Installation:
When a new atomizer is connected or
the existing atomizer is disconnected
and reconnected, a message prompt
will be displayed – ‘New Coil Right,
Same Coil Left’. Press the right
adjustment button to confirm that a
new atomizer has been connected, or
the left adjustment button to confirm
that the existing atomizer has been
reconnected. Selection of a new coil
should only be made when the atomizer
and coil are at room temperature.

14 15
Using your Corsa Using your Corsa
Short Circuit Protection:
If a short circuit occurs when the power
button is pressed, ‘atomizer short’ will
be displayed on the screen. Replace the
atomizer to continue.
Low Voltage Protection:
When the battery voltage is below
3.1V, ‘Battery Low’ will be displayed on
the screen. If following this message
the button is continually pressed, the
message ‘Battery Low Lock’ will be
displayed and the device will not fire.
To unlock and activate the device the
batteries must be recharged.
Weak Battery Alert:
Under VT/VW mode, when battery
voltage is below 2.9V, the device will
display ‘Weak Battery’. The output
power will automatically be reduced
accordingly.
10 Second Protection:
If the power button is pressed for
longer than 10 seconds the output will
automatically cease and the message
‘Over 10s Protection’ will be displayed.
Upgrading Firmware:
To upgrade the firmware installed on the
device simply load the relevant product
page on the Totally Wicked website,
click on the link under ‘Firmware
Upgrade’ and follow the instructions
provided.

16 17
Wattage Range in VW Mode and VT Mode: 1W – 150W
Temperature Range in VT Mode: 100-315°C / 200-600°F
Temperature Coefficient of Resistance Range in TCR Mode: 1-1000
Resistance Range: 0.05-1.5ohm in VT Mode, 0.1-3.5ohm in VW Mode
Tank Connector: 510 Connector
Battery: Dual 18650
Firmware Type: Upgradable
The Corsa components have a 28-day parts warranty. The USB cable supplied has a
12-month warranty. If any parts are found to be faulty within this time please contact
our customer service team, whose details are on the back page of this booklet and
we will arrange for a replacement. We may require the goods to be returned for further
investigation.
Specifications Warranty

18 19
DO’s
• Store the Corsa and its accessories away from children when not in use.
• Ensure the Corsa is powered off when not in use.
• Avoid accidentally pressing the Corsa power button when not in use.
• Remove the battery when you do not intend to use the Corsa for several days.
• Please only use the charging cable provided.
• Please dispose of dead batteries in accordance with your country’s appropriate
legislation.
• Use only a maximum of 1.5ohm when in VT mode. The mode will automatically be
switched to VW mode when the coil is larger than 1.5ohm or a normal coil is used.
DON’Ts
• Do not charge the batteries in a damp environment.
• Do not use the device when temperatures are outside the range -10 - 60°C.
• Do not charge the battery when temperatures are outside the range 0 - 45°C.
• Do not carry batteries in a pocket bag with other metallic objects.
• Do not attempt to repair a faulty Corsa as these are sealed units with no serviceable
parts. Attempted repairs will void the warranty.
• Do not use temperature control coils under VW mode, damage will be caused.
Precautions