Totally Wicked Tornado NX User manual

USER MANUAL / BEDIENUNGSANLEITUNG

2
Congratulations on Purchasing your
Totally Wicked Tornado NX Electronic Cigarette.
The Totally Wicked Tornado NX is a unique high quality starter kit that can equally be used
by experienced vapers who prefer a slightly tighter but still adjustable draw. Combining
flawless performance with exceptional styling and ergonomics, the Tornado NX provides
everything that is required to begin vaping. What’s more, top filling capability ensures that
the device can be refilled conveniently, simply by unscrewing the mouthpiece. The Tornado
NX provides a direct output from its substantial 900mAh battery, which is sure to provide a
full day of vaping for the majority of its users. Adjustable airflow means that users are able to
tune their vaping experience to suit their taste.

3
Mouthpiece
Tank
Atomizer Head
Atomizer Base Power Button
Airflow Ring Battery

4
Using your Tornado NX
E-liquid Filling:
To fill the tank with e-liquid, turn the
mouthpiece in the anticlockwise direction
until fully removed from the tank tube.
Insert the filling nozzle into one of the 2
slots to the side of the central tube and fill
the tank, being careful not to fill above the
top of the window.

5
Power On and Off:
The Tornado NX uses a 5-click on/off
function. To switch the device on, quickly
press the power button 5 times. The LEDs
surrounding the power button will flash
quickly 5 times, signifying that the device
is powered on. Once the Tornado NX is
powered, press the button 5 times to switch
the device off. The LEDs will again flash
quickly 5 times, showing the device has
turned off.
Vaping:
Simply press the power button as you
inhale from the mouthpiece. The button
LED will illuminate while vaping.
Using your Tornado NX

6
Using your Tornado NX
Airflow Adjustment:
To adjust the airflow, rotate
the airflow ring clockwise or
anticlockwise to expose the
airflow holes and find a setting
which provides the desired
vaping experience.
Charging the Battery:
Simply charge the Tornado NX via a USB
cable when connected to a powered
USB port or suitable wall adapter. When
charging, the button LED will illuminate red.
The LED will power off when the device is
fully charged.

7
New Atomizer Head Installation:
To replace the atomizer head, invert the
device and rotate the tank tube in the
anticlockwise direction until fully removed
from the battery. Pull the atomizer head
out from the atomizer base and insert a
new atomizer head in its place, rotating the
atomizer on entry can aid this process.
Note: When installing a new atomizer
head, drip a few drops of e-liquid into the
wicking material, this will ensure optimum
performance.
Using your Tornado NX

8
Battery Level Indication:
The battery level is indicated by the
illumination of the button LED shortly after
the device’s button has been pressed.
The battery levels and corresponding light
conditions are detailed in the table.
Short Circuit Protection:
If a short circuit occurs or the resistance is
too low, the button LED will flash 5 times
consecutively and the device will not power.
If the short circuit warning is displayed,
replace the atomizer head.
Low Voltage Protection:
When the battery voltage drops below
3.3V, the button LED will flash 40 times
consecutively and the device will power off.
Recharge the device to continue vaping.
Battery Level Light Condition
60%-100% Stays lit
30%-59% Flashes Slowly
10%-29% Flashes Moderately
0-9% Flashes Quickly
Using your Tornado NX

9
Incompatible Resistance Indication:
If an atomizer head above 5ohm is
installed, the button LED will flash slowly,
indicating that the resistance is too high.
If an atomizer head below 0.2ohm is
installed, the button LED will flash 5 times
consecutively, indicating that the resistance
is too low. If the incompatible resistance
warning is displayed, ensure the atomizer
head is properly fitted. If it is and the
warning continues, replace the atomizer
head.
Tornado NX Dimensions:
169mm (l) x 14mm (d)
Battery Capacity: 900mAh
Battery Type: Lithium - Integrated
Tank Capacity: 2ml
Voltage Output: 4.2V – 3.3V (Direct)
Battery Voltage: 3.7V (Nominal)
Resistance Range: 0.2ohm – 5ohm
Maximum Filling Nozzle Diameter: 2.8mm
Using your Tornado NX Specications

10
Product Storage and Battery Precautions
• Store the Tornado NX and its accessories away from children when not in use.
• Ensure the Tornado NX is powered off when not in use.
• Avoid accidentally pressing the Tornado NX power button when not in use.
• Please only use the charging cable provided.
• Please dispose of dead batteries in accordance with your country’s appropriate legislation.
• Do not charge the batteries in a damp environment.
• Do not use the device when temperatures are outside the range -10 - 60°C.
• Do not charge the battery when temperatures are outside the range 0 - 45°C.
• Do not attempt to repair a faulty Tornado NX as these are sealed units with no serviceable
parts. Attempted repairs will void the warranty.