Totally Wicked arc pico User manual

USER MANUAL / BEDIENUNGSANLEITUNG
ELECTRONIC
CIGARETTE
KIT

2
Congratulations on purchasing your
Totally Wicked arc pico Electronic Cigarette.
The Totally Wicked arc pico is a stylish, highly versatile e-cigarette design
incorporating an intelligent temperature control system, allowing you to finely
tune your device to suit your vaping style. You are provided with six modes of
operation; variable power (W); Bypass; variable temperature with nickel coils (Ni);
variable temperature with titanium coils (Ti); variable temperature with stainless
steel coils (SS): and temperature coefficient of resistance (TCR) mode. Each
adjustable mode allows for incremental settings in terms of watts, temperature
and temperature coefficient of resistance. The Subair III Mini Tank paired with the
arc pico kit makes the perfect combination. The Subair III Mini Tank provides top
filling functionality, hidden airflow control, and can be fully disassembled for ease
of cleaning. The tank is supplied with 2 of the popular ML/EC atomizer heads, 1 x
0.3ohm Kanthal and 1 x 0.5ohm Kanthal, while additional nickel, titanium, stainless
steel and NotchCoil atomizer heads are available as accessories. The arc pico kit
combines all of its functionality in a stylish and compact package suitable for all
electronic cigarette users.

3
Battery Cap
Power Button
OLED Screen
Micro USB-Port 510 Connector
Up Button Down Button
Adjustment Button

4
Atomizer base ML/EC head Central air tube Glass Top cap Mouthpiece
Atomizer Tube

5
Using your arc pico kit
Fitting a Battery:
The arc pico requires an 18650
battery. To fit the battery, unscrew the
battery cap on the top of the device
and insert the battery, ensuring the
correct polarity.
Note: Please ensure that the battery
installed is a good quality lithium
ion 18650 capable of at least 25A
constant discharge.
Battery
Battery Cap
Positive
Negative

6
Using your arc pico kit
Power On and Off:
The arc pico uses a 5-click on/off
function. To switch the device on
quickly press the power button 5
times. The screen will illuminate,
indicating that the device is powered
on. Once the arc pico is powered
on the user can press the button 5
times to switch the device off.
E-Liquid Filling:
To fill the Subair III Mini tank with
e-liquid, unscrew the top cap and
remove from the tank tube assembly.
Insert the filling nozzle into one of
the filling holes either side of the
central air tube and fill the tank with
e-liquid, being careful not to overfill.
Replace the top cap by screwing on
until firmly seated.

7
Using your arc pico kit
Vaping:
Simply press the power button as
you inhale.
Airflow Adjustment:
To adjust the airflow, turn the airflow
control ring on the atomizer base
– clockwise to increase the draw,
anticlockwise to decrease the draw.
Anticlockwise Clockwise

8
Using your arc pico kit
Charging the Battery:
Charge the arc pico via the USB
cable connected to a powered USB
port or suitable wall adapter. The
indicator on the display will indicate
the battery status. The 18650 battery
may also be charged using a
suitable external charger.
New Atomizer Installation/
Replacement:
To replace the existing atomizer
head, invert the tank and unscrew
the atomizer base from the central
air tube. Unscrew the atomizer from
the atomizer base. Install a new
atomizer head by screwing in until
firmly seated. The Subair III Mini tank
can now be screwed onto the arc
pico battery.

9
Using your arc pico kit

10
Using your arc pico kit
Shift between VW/Bypass/VT-Ni/
VT-Ti/VT-SS/TCR Modes:
When powered on, quickly press the
power button 3 times consecutively,
the active mode will be displayed
on the screen. Use the adjustment
buttons to cycle through the VW/
Bypass/VT-Ni/VT-Ti/VT-SS/TCR-M1/
TCR-M2/TCR-M3 modes. Press the
power button to select the mode
which is currently displayed, or
alternatively, wait 10 seconds with
the mode of choice displayed on
the screen.
VW Mode:
When in VW mode, use the + or
- adjustment buttons to decrease
or increase the level of wattage
respectively. The available wattage
range is 1W – 75W.
Bypass Mode:
When in bypass mode there is a
direct voltage output dependent
on battery voltage and atomizer
resistance.

11
Using your arc pico kit
VT Mode (Ni/Ti/SS):
When in VT mode, use the + or
- adjustment buttons to increase
or decrease the temperature
respectively. The available
temperature range is 100-315°C or
200-600°F. To adjust the wattage
level whilst in VT mode, press the
power button 4 times consecutively
to activate the wattage setting, use
the + or - adjustment buttons to
adjust the wattage level. To lock/
unlock the atomizer resistance, hold
the power
button and + button simultaneously
for 2 seconds.
Note: Only lock the atomizer when
the coil is at room temperature.

12
TCR Mode (M1/M2/M3):
To configure TCR modes M1, M2
and M3, when the device is powered
off, hold the power button and the +
button simultaneously until you enter
the TCR configuration menu. Use
the + or – buttons to cycle through
M1, M2 and M3 modes and single
press the power button to select the
mode that you wish to configure.
Use the + or – buttons to increase or
decrease the TCR value depending
on your choice of coil material.
Using your arc pico kit

13
Using your arc pico kit
TCR Value Range:
Material TCR Value Range
Nickel 600-700
NiFe 300-400
Titanium 300-400
SS (303, 304, 316, 317) 80-200
Note: The TCR value displayed is 105 (100,000) times greater than the actual
TCR value and is for arc pico usage only.

14
Using your arc pico kit
Stealth Mode:
When powered on, simultaneously
hold the power button and the left
(minus -) adjustment button to
activate stealth mode. Repeat the
process to deactivate stealth mode.
Key Lock Mode:
When powered on, simultaneously
hold the two adjustment buttons for
3 seconds to activate key lock mode.
Repeat the process to deactivate the
key lock mode.
Display Modes:
When powered off, hold both
adjustment buttons to turn the
display through 180°. Two display
states are available.
Replacing the Battery:
To replace the 18650 battery, simply
remove the battery cap on the top of
the device and remove the battery
from its compartment. Insert a new
18650 battery and replace the cap,
ensuring the correct polarity.

15
Using your arc pico kit
Short Circuit & No Atomizer
Protection:
If a short circuit occurs, ‘Atomizer
Short’ will be displayed on the
screen and the device will not fire.
If no atomizer is detected, ‘No
Atomizer’ will be displayed on the
screen. If this occurs, remove and
replace the atomizer, ensuring the
stated resistance is compatible, if
the message persists, replace the
atomizer.
Atomizer Low Alert:
When the resistance of a coil is
detected to be lower than 0.1ohm
in VW/Bypass mode, or lower than
0.05ohm in VT mode, the screen will
display ‘Atomizer Low’. If this occurs,
remove and replace the atomizer,
ensuring the stated resistance is
compatible, if the message persists,
replace the atomizer.

16
Using your arc pico kit
Atomizer Protection:
If the power button is pressed
for longer than 10 seconds, the
output will automatically cease
and the message ‘Over 10s’ will be
displayed.
Low Voltage Protection:
When the battery voltage is below
3.1V, ‘Battery Low’, and then ‘Lock’
will be displayed on the screen.
Recharge the battery to unlock the
device and begin vaping again.
Low Battery Alert:
When the battery reaches lower than
10% capacity, the power symbol on
the screen will flash continuously.
Charge the device as soon as
possible.
Weak Battery alert:
If the voltage of the battery drops
below 2.9V whilst vaping, the screen
will display ‘Weak Battery’ and
the output power will be reduced
accordingly.

17
Using your arc pico kit
Temperature Protection:
In VT mode, if the actual
temperature of the coil reaches
the set temperature, ‘temperature
protection’ will be displayed on the
screen. The device can continue to
be used normally.
Temperature Alert:
If the temperature of the device
exceeds the maximum safe
operating temperature, ‘Device
Too Hot’ will be displayed on the
screen and the output will shut off
automatically. Let the device cool
down before continuing to vape.

18
Kit Contents
1 x arc pico Body
1 x Subair III Mini Tank
1 x 0.3ohm ML Atomizer Head
1 x 0.5ohm ML Atomizer Head
4 x Sealing Rings
1 x USB Cable
1 x User Manual

19
arc pico Specications
Dimensions: 71mm (L) x 22mm x 45mm
Battery Type: 18650
Voltage Output: 4.2V – 3.3V (Direct)
Wattage Range in VW Mode and VT Mode: 1W – 75W
Temperature Range in VT Mode: 100-315°C / 200-600°F
Temperature Coefficient of Resistance Range in TCR Mode: 1-1000
Resistance Range: 0.05-1.5ohm in VT Mode, 0.1-3.5ohm in VW/Bypass Mode
Firmware Type: Upgradeable
Tank Connector: 510 Connector

20
Subair III Mini Tank Specications
Dimensions: 14mm x 169mm
Tank Capacity: 2ml
Atomizer Type: ML/EC
Maximum Filling Nozzle Diameter: 2.8mm