Totally Wicked Polka User manual

ELECTRONIC CIGARETTE KIT
USER MANUAL / BEDIENUNGSANLEITUNG
TW_Polka_Compliant_Manual.indd 1 04/11/2016 09:17

2
Congratulations on purchasing your
Totally Wicked Polka Electronic Cigarette Kit.
The Totally Wicked Polka is an e-cigarette which achieves flawless operation,
simplicity and convenience. Combined with its sleek aesthetics and exceptionally
compact size, it proves to be the perfect choice for a wide variety of e-cigarette
users. The vacuum power switch functionality ensures optimum simplicity and
ease of use, activating only when the user inhales through the mouthpiece. What’s
more, the device incorporates a leak resistant tank design with adjustable top
airflow, meaning the user can simply fill up with e-liquid and vape without the
inconvenience of tiresome spillages. Due to the hassle-free nature of the Polka, it is
sure to be a popular starter kit, or ‘on-the-go’ device.
TW_Polka_Compliant_Manual.indd 2 04/11/2016 09:17

3
Top Cap
(with mouthpiece)
Airflow Control
Ring
Air Pipe
Atomizer Head
Rectangular
Slot
Battery
TW_Polka_Compliant_Manual.indd 3 04/11/2016 09:17

4
Using your Polka
Installing an Atomizer Head:
Remove the top cap from the battery
by pulling firmly. Use the rectangular
slot on the underside to unscrew
the air pipe from the battery in the
anticlockwise direction and lift the air
pipe out of the device’s integral tank.
Drip a few drops of e-liquid into the
internals of the atomizer head before
screwing it onto the air pipe in the
clockwise direction, this will ensure
optimum performance and longevity
of the atomizer head.
TW_Polka_Compliant_Manual.indd 4 04/11/2016 09:17

5
Using your Polka
Filling with E-liquid:
To fill the device, remove the air pipe
and fill the tank cavity with e-liquid.
The maximum fill capacity of the tank
is indicated clearly by a horizontal
line on the tank window. To replace
the air pipe, insert it into the tank and
turn in the clockwise direction, use
the rectangular slot on the underside
of the top cap to tighten the air pipe
until securely sealed.
Maximum refill nozzle diameter:
7.0mm
TW_Polka_Compliant_Manual.indd 5 04/11/2016 09:17

6
Using your Polka
NOTE: Please do not fill beyond the
max fill line as this will cause the
e-liquid to overflow once the atomizer
and air pipe are installed.
Max
TW_Polka_Compliant_Manual.indd 6 04/11/2016 09:17

7
Using your Polka
Vaping:
Simply inhale through the
mouthpiece to activate the power
switch and produce vapour. The tank
LED will remain lit while vaping.
Adjustment of Airflow:
To adjust the airflow, remove the top
cap and use the rectangular slot on
the underside to fully unscrew the
air pipe. Turn the airflow control ring
around the air pipe until the desired
amount of airflow is achieved, the
number of holes which are open
can be used as a reference. Refit the
air pipe and top cap firmly and the
device is ready for use.
TW_Polka_Compliant_Manual.indd 7 04/11/2016 09:17

8
Using your Polka
Charging the Batteries:
The Polka can be charged via the
USB cable when connected to a
powered USB port or suitable wall
adapter. The tank LED will light up
in red to indicate that the battery is
charging successfully, the light will
power off once fully charged.
Battery Life Indication:
Different colour LEDs are used to
signify the battery status as the
battery level changes. The table
opposite can be used as a reference.
TW_Polka_Compliant_Manual.indd 8 04/11/2016 09:17

9
Using your Polka
Battery Charge Level Light Condition
16 - 100% Green LED
6 - 15% Yellow LED
0 - 5% Red LED
TW_Polka_Compliant_Manual.indd 9 04/11/2016 09:17

10
Specications
Dimensions: 75mm x 30mm x 14mm
Battery: 650mAh Li-Battery
Tank: Integrated Tank, 1.8ml Capacity
Atomizer Type: IC
Maximum Output Wattage: 15W
Resistance Compatibility: 1 – 3.5ohm
Maximum refill nozzle diameter:
7.0mm
Kit Contents
1 x Polka
2 x IC atomizer head (1.4ohm)
1 x USB Cable
1 x User Manual
TW_Polka_Compliant_Manual.indd 10 04/11/2016 09:17