Toto TBV01801U Installation instructions

Warranty Registration and Inquiry
For product warranty registration, TOTO U.S.A. Inc. recommends online warranty registration. Please visit
our web site http://www.totousa.com. If you have questions regarding warranty policy or coverage, please con-
tact TOTO U.S.A. Inc., Customer Service Department, 1155 Southern Road, Morrow, GA 30260
[phone] or [phone] when calling from outside of U.S.A.
Installation and Owner’s Manual
Manual de Instalação e do Proprietário
Manual de instrucciones y del propietrario
Manuel d’installation et d’utilisation
Pressure Balance Valve Trim
Cubierta de la válvula de equilibrio de presión
Garniture de soupape d'équilibrage de pression
Guarnição da válvula de equilíbrio de pressão
TBV02801U
TBV01801U

2
ENGLISH
TABLE OF CONTENTS
THANKS FOR CHOOSING TOTO!
CARE & CLEANING
COMMON TOOLS NEEDED
BEFORE INSTALLATION
Observe all local plumbing codes.
Make sure the water supply is shut off.
Read these instructions carefully to ensure proper installation.
TOTO reserves the right to update product design without notice.
Screwdriver Silicone Caulk
Thanks for Choosing TOTO! ..............................................................................2
Before Installation................................................................................................2
Common Tools Needed......................................................................................2
Care & Cleaning...................................................................................................2
Parts Included ......................................................................................................3
Installation Procedure..........................................................................................3
Warranty................................................................................................................5
Rough-In Dimensions .......................................................................................19
The mission of TOTO is to provide the world with healthy, hygienic and more
comfortable lifestyles. We design every product with the balance of form and
function as a guiding principle. Congratulations on your choice.
Your new trim is designed for years of trouble-free performance. Keep
it looking new by cleaning it periodically with mild soap, rinsing thoroughly
with warm water and drying with a clean, soft cloth. Do not use abrasive
cleaners, steel wool or harsh chemicals, as these will dull the finish. Failure
to follow these instructions may void your warranty.

3
ENGLISH
INSTALLATION PROCEDURE
PARTS INCLUDED
Handle
Escutcheon* Collar Screw and Lock Washer
Adapter Screw
Long Screws (2)
Check to make sure that all these parts were included in your packaging:
* Actual product may differ in appearance from illustration depending on the model.
Collar
Long screws
Valve
Finished wall
ill. 1
Correct Installation
Screw hole
Set Screw and Allen
Wrench
1. Confirm that the valve has been installed properly and pull the plaster
guard outwards to remove.
NOTE: The finished wall surface should be between the min and max
markings on the plaster guard. See the TSPTM installation manual
for further information.
2. Use the two long screws to
secure the collar to the valve
(ill. 1). Make sure the screw
hole of the collar is oriented on
the bottom.

4
ENGLISH
INSTALLATION PROCEDURE
Valve
Adapter
Lock washer
Screw
Adapter
Adapter
Handle
Set screw
Screw
Escutcheon
Collar
Finished wall
ill. 2
ill. 4 ill. 5
ill. 3
ill. 6
3. Use the screw to
mount the escutcheon
to the collar (ill. 2).
Make sure that
the TOTO logo is
positioned on the
bottom center.
4. Secure the adapter
to the valve with
the screw and lock
washer (ill. 3).
5. Manually turn the
adapter clockwise
until it stops (ill. 4).
6. Slide handle onto
the adapter (ill. 5).
If handle position needs fine adjustment,
remove handle and rotate to reposition
on the adapter one notch from the
original position.
Tighten the handle onto the collar
using the set screw and allen
wrench.
7. Apply silicone caulk to perimeter of
escutcheon. Leave opening for
weep hole on bottom (ill. 6).