Toto washlet User manual




FLUSH A small volume of water is
used to flush the toilet bowl clean.
・Use this if the toilet paper is not flushed away.
Full flush
Half flush
AUTO WAND
CLEANING
󲄂The wand is
cleaned with clean
sterilized water.
■Operation is also possible using
the buttons on the control panel.
■You can flush the toilet bowl
using the manual lever (for
toilet bowl flushing in power
failure) during power failure.
Hand lever
■MASSAGE
◆“Washlet”is a registered trademark of TOTO.
Standard Use
Essential Points of Use!
Press a button on the remote control; a beep sounds when the top unit receives the signal.
WASH
DRY
STOP Stops rear washing
and other operating
functions.
Washing the rear.
For washing rear using mild water pressure.
Serves as a bidet for ladies.
OSCILLATING
󲄂If you press the button again
during use, the wand moves
back and forth so that you can
wash your rear thoroughly.
Dries wet parts using
warm air.
Low Battery
warning mark
POWER
DEODORIZE
󲄂 Increases air suction
power for powerful
deodorization.
Setting confirmation
󲄂The current settings
can be checked
from the LED.
● The function that can be used when you press the “REAR”,
“SOFT REAR” or “BIDET” button during use.
󲄂 The wand returns to the standard
position (3rd step) each time
the wash button (“REAR”, “SOFT
REAR” or “BIDET”) is pressed.
󲄂 If you press the water pressure
adjustment button, the lamp lights for
about 10 seconds at the preset position.
󲄂 If you press a wash button (Rear, Soft
or Bidet), the lamp lights for about 10
seconds at the preset position.
■WATER PRESSURE ADJUSTMENT (5 steps.) ■WASH POSITION
ADJUSTMENT (5 steps.)
󲄂 Washes with the water
pressure pulsating
between soft and strong.
2015. 3. 2
Product functions and shape may differ depending on the model.

Press the button selected in step repeatedly
until a desired temperature level lights up.
2
1

Temperature Adjustment
Press the button of the temperature you want
to change.
※There is no "OFF" setting for drying.
Energy-Saving Features
※It takes approximately 10 days to determine the time slot where
the toilet is used less frequently.
Once set, the toilet seat heater turns off everyday at that time to save energy.
(The energy-saving time period can be set to 6 or 9 hours.)
ENERGY-SAVING TIMER
When the time (1:00 am) you want to start energysaving function is
reached, press the button repeatedly until the "6" LED lights up.
1
If the button is not pressed for about 10 seconds, the
temperature adjustment LED will go off, but the setting
will be retained.
If the temperature adjustment LED goes out before the
setting is completed, start all over again at step .
The Washlet memorizes the time slot when the toilet is used less frequently
and lowers the toilet seat temperature automatically to save energy.
AUTO ENERGY-SAVING FUNCTION
Recommended energy-saving !
When using energy-saving function for 6 hours(1:00 - 7:00am).
Example

You can turn the feature ON/OFF at your discretion.
To turn the auto energy-saving
function "ON"
To turn "OFF"
1
Toilet seat
temperature adjusutmentbutton
Temperature can be changed to "Warm Water",
"Toilet Seat" and "Warm Air" (only models equipped
with warm air dryer)
Default setting
Drying air temperature
adjustment button
Displaying
the temperature level of
the pressed button
Warm water temperature
adjustment button
OFF
LOW
MEDIUM
HIGH
ON
OFF
LED goes out.
6 hours
9 hours
LED goes out.
OFF

Auto Wash ON/OFF
When you stand up from the seat,
the toilet bowl is flushed automatically.
How to Use
More comfortable! More Energy-Savings!
LED goes out.
Setting completed
Press the