
10
5. Plug the appliance into the power outlet and choose your desired speed
setting whilst holding the power handle steadily. Switch the blender on by
holding and pressing the power button.
6. Hold the chopper bowl firmly.
7. Press and hold the power button to blend your ingredients using the chopper.
8. When finished, release the power button and unplug the blender from the
outlet.
Note: If the chopper get blocked first stop and unplug it before clearing.
After use, unplug and detach the power handle and lid, take the blade out of the
bowl by holding the plastic shaft, then pour out the food.
Always switch off the blender and unplug it before cleaning. Refer to the
Cleaning and Care section.
WARNING! DO NOT touch the edges of the blade since they are sharp!
Using the Whisk:
1. Clean the whisk, whisk head and beaker.
2. Insert the whisk into the whisk head until you hear a slight click.
3. Fit the power handle inside of the whisk head, turn and lock until you hear a
slight click. The marks on the power handle and the whisk head should now
be aligned with each other. Note: Make sure the power cord is not damaged.
4. Fill the beaker with food. Do not exceed the max level.
5. Plug in the blender and choose your desired speed setting, whilst holding the
power handle steadily. Switch on the appliance by pressing and holding the
power button.
6. To prevent splashing, use the low speed setting when you begin mixing your
ingredients.
7. Immerse the whisk completely into the ingredients, and blend them moving
the appliance slowly up and down in circles.
8. When finished, release the power button and unplug it the outlet.
WARNING! Never blend hot oil, fat or meat.
Note: If the whisk gets blocked, first stop and unplug it before clearing.
After use, unplug and detach the whisk from the power handle.
Always switch off the blender and unplug it before cleaning. Refer to the
Cleaning and Care section.
WARNING! Make sure the blender is switched off when switching attachments.
WARNING! DO NOT come into contact with moving parts while blending. AVOID
touching the blades or attachments when the appliance is turned on to avoid
injury.
Rest Times:
• Do not operate the hand blender for more than 1 minute at a time, otherwise
it will become very hot and can become damaged.
• Do not exceed 15 seconds running time of the unit without blending
ingredients.
• Do not exceed 1 minute running time when operating under high speed.
• Allow the appliance to rest for a minimum of 2 minutes between blending
cycles.