
12
USING YOUR AIR FRYER
Once the unit is on and the required
cooking basket and pre-set have been
selected, press the
key to activate the
Temperature selection function on the
selected cooking basket or baskets.
Once the temperature selection function
has been activated, press the
and
keys to increase or decrease the
temperature, by increments of 5. The
currently selected temperature will be
displayed on the unit’s LED screen. Short-
press each key to gradually increase the
temperature, or press and hold it to cycle
through the temperature range more
quickly.
When the correct temperature has been
selected, press the key to begin or
resume the cooking cycle.
SETTING THE COOKING TIME:
The appliance’s cooking time can be set
manually, from 0 to 60 minutes.
Press the
key to activate the cooking
time selection function on the selected
cooking basket or baskets. The
and
keys will illuminate to show this function
has been activated.
Once the cooking time function has been
activated, press the
and
keys to
increase or decrease the temperature, by
increments of 1. The currently selected
cooking time will be displayed on the
unit’s LED screen. Short-press each key
to gradually increase the temperature,
or press and hold it to cycle through the
temperature range more quickly.
When the correct cooking time has been
selected, press the key to begin or
resume the cooking cycle.
THE SYNC FUNCTION:
This unit is equipped with a Sync function,
which staggers the start of each cooking
cycle as required to ensure both finish at
the same time.
To activate the Sync function, begin by
choosing your settings for the first cooking
basket, as detailed in the corresponding
section on the previous page.
When the desired pre-set has been
selected and the time and temperature
have been set as required, press the
key on the unit’s control panel to activate
the Sync function. The key will flash to
show this function has been activated.
Once the Sync function has been
activated, select the second cooking
basket key and choose your cooking
settings as required, When the desired
settings have been selected for both
cooking baskets, press the key to start
the cooking process. The keys will stop
flashing and remain illuminated, the
longer cooking cycle will begin, and the
unit will automatically delay the start of
the shorter cooking cycle as required.
THE SHAKE FUNCTION
In pre-set programs which require shaking
the ingredients halfway through, the
‘Shake’ indicator will light up on the unit’s
control panel and there will be a sound
prompt to indicate when the ingredients
should be shaken.
AFTER COOKING:
CAUTION! DO NOT touch the cooking
baskets during and for some time after
use, as it gets very hot. Only hold the
cooking baskets by the handle.
• When the set cooking time has
elapsed the appliance will emit an
audible signal and the text ‘End’ will
be displayed on the unit’s LED screen.
When this occurs, pull the cooking
baskets out of the appliance and
place it on a heat-resistant surface.
Alternatively, turn the appliance off
manually by pressing the key
twice.
• Check if the ingredients are ready.