
7
Before First Use:
Read all instructions and safety information carefully before first use. Please retain this
information for future reference.
1. Remove your appliance from the packaging.
2. Check that there is no damage to the cord or any visible damage to the body.
3. Dispose of the packaging in a responsible manner.
4. Remove any stickers or labels from the appliance. DO NOT remove the rating label.
5. Thoroughly clean the grill plate and pan with hot water, some washing-up liquid and
a non abrasive sponge. Dry thoroughly. Place the grill plate in to the bottom of the
drawer.
6. Wipe the inside and outside of the appliance with a damp cloth.
7. Do not fill the fryer with oil or frying fat. This fryer operates using hot air and requires
very little to no oil.
8. Familiarise yourself with the control panel shown in the Specifications section.
9. Situate your appliance according to the Important Safety Instructions section.
Note: This appliance uses very little oil or no oil.
Using Your Appliance.
Preparing For Use:
1. Place the appliance on a stable, horizontal and even surface. Do not place the
appliance onto a non-heat-resistant surface.
2. Do not fill the drawer with oil or any other liquid.
3. Do not put anything on top of the appliance, as this will disrupt the airflow and the
hot air frying will be affected as a result.
Air Fryer Drawer Safety Switch:
For your safety, this air fryer contains a safety switch in the drawer, designed to keep if
from accidentally turning on whenever the drawer is not properly situated inside the
appliance or the timer is not set. Before using your air fryer, please ensure that the grill
plate is inside the drawer, the drawer is fully closed and that the cooking timer has been
set.
Removing the Drawer:
The drawer can be removed fully from the air fryer. Pull on the handle to slide the drawer
out of the air fryer.
Note: If the drawer is removed from the main body of the fryer when in operation, the unit
will automatically stop working. When the drawer is re-inserted, the air fryer will resume
operation on the latest selected settings. Alternatively, if the drawer is removed while the
unit is turned on but not in operation, all the indicators on the unit’s control panel will
light up momentarily, then go out again. The On/Standby indicator will remain lit to show
the unit is on Standby mode.
Air Frying:
1. Ensure that the drawer, with grill plate, is fully inserted in the unit.
2. Connect the mains plug in an earthed wall socket.
3. Press the ON/Standby key.
4. Press the Temperature key and then the increase/decrease keys to set the required
temperature for cooking.
5. Press the Timer key and then the decrease key to set 3 minutes for preheating. Press
the ON/Standby key once more to start.
6. Once pre-heated and the timer reaches 0 mins the device is ready for use. Carefully
pull the drawer out of the appliance, place the ingredients inside the drawer, and
slide the drawer back in to the appliance.
Note: DO NOT exceed the MAX (maximum) line.
Note: Never use the pan without the grill plate.
7. Press the mode selection key to select an appropriate cooking mode or click the
temperature and/ or time keys and increase/decrease keys to choose an appropriate
time and temperature.
8. Press the ON/Standby key once more to start cooking. The fan will begin to work.
CAUTION! DO NOT touch the drawer during and for some time after use, as it gets very
hot. Only hold the drawer by the handle.