Toyota 4Runner 2003 User manual

4Runner_Navi_U (L/O 0208)
i2003 MY 4Runner Navigation from Aug. ’02 Prod. (OM35799U)
Foreword
Thank you for your purchase of the Navigation System. Please read this manual carefully to ensure proper use. Keep this
manual stored in your vehicle at all times.
The Toyota Navigation System is one of the most technologically advanced vehicle accessories ever developed. The system
receives satellite signals from the Global Positioning System (GPS) operated by the U.S. Department of Defense. Using these
signals and other vehicle sensors, the system can show you where you are and assist you in locating a desired destination.
The navigation system is designed to select efficient routes from your present starting location to your destination. The system is
designed to direct you to a destination that is unfamiliar to you in efficient manners. The system uses the maps of DENSO based
on NAVTECH maps, GDT maps and infoUSA POIs. The calculated routes are neither the shortest routes nor routes without traffic
congestion. Your own personal local knowledge or “short cut” may at times be faster than the calculated routes.
The navigation system’s database includes about 50 point of interest categories to allow you to easily select destinations such as
restaurants and banks. If a destination is not in the database, you can enter the street address or a major intersection close to it
and the system will route you there. The system will provide both a visual map and audio instructions. The audio instructions will
announce the distance and direction to go when you are approaching a fork or intersection. These voice instructions will help you
keep your eyes on the road and are timed to provide enough time to allow you to maneuver, change lanes or slow down.
Please be aware that all current vehicle navigation systems have certain limitations that may affect their ability to
perform properly. The accuracy of the vehicle’s position depends on the satellite condition, road configuration, vehicle
condition or other circumstances. For more information on the limitations of the system, refer to pages 60 through 62.
2002 TOYOTA MOTOR CORPORATION
All rights reserved. This material may not be reproduced or copied, in
whole or in part, without the written permission of Toyota Motor Corporation.

4Runner_Navi_U (L/O 0208)
ii 2003 MY 4Runner Navigation from Aug. ’02 Prod. (OM35799U)
Important information about this manual
For safety reasons, this manual indicates
items requiring particular attention with
the following marks.
CAUTION
This is a warning against anything
which may cause injury to people if
the warning is ignored. You are in-
formed about what you must or
must not do in order to reduce the
risk of injury to yourself and others.
NOTICE
This is a warning against anything
which may cause damage to the ve-
hicle or its equipment if the warning
is ignored. You are informed about
what you must or must not do in
order to avoid or reduce the risk of
damage to your vehicle and its
equipment.
INFORMATION
This provides additional information.
Initial screen
UN001
When you start the engine or turn the
ignition switch to “ACC”, the initial
“TOYOTA” screen appears and the
system begins operating.
CAUTION
When the vehicle is stopped with
the engine running, always apply
the parking brake for safety.
After a few seconds, the “CAUTION”
screen appears.
L00002
Touch either “English” or “French” to
select a language. Read and follow
the instructions.

4Runner_Navi_U (L/O 0208)
iii 2003 MY 4Runner Navigation from Aug. ’02 Prod. (OM35799U)
When you touch the “I agree”
switch on the screen, the “map”
screen appears.
You can access this screen when you
push the “INFO” button and touch the
“Language” switch. Then you can
select a language.

4Runner_Navi_U (L/O 0208)
iv 2003 MY 4Runner Navigation from Aug. ’02 Prod. (OM35799U)
Safety Instruction
L00002
To use your system as safely as pos-
sible, follow all the safety tips shown
below.
This system is intended to assist you in
reaching your destination and, if used
properly, can do so. You, as the driver,
are solely responsible for the safe op-
eration of your vehicle and the safety of
your passengers.
Do not use any feature of this system
to the extent it distracts you from safe
driving. Your first priority while you are
driving should always be the safe opera-
tion of your vehicle. While you are driv-
ing, be sure to observe all traffic regula-
tions.
Before attempting to use this system
while you are driving, learn how to use
it and become thoroughly familiar with it.
Read the entire Navigation System
Manual to make sure you understand the
system. Do not allow others to use this
system until they have read and under-
stood these and other instructions in this
manual.
For your safety, some functions may be-
come inoperable when you start driving.
Unavailable switches are dimmed. You
can input your destination and select
your route only when the vehicle is not
moving.
CAUTION
For safety, the driver should not
operate the navigation system
while he/she is driving. Inattention
to the road and traffic may cause
an accident.
While you are driving, be sure to
follow the traffic regulations and
keep the road condition in mind.
If a traffic sign on the road has
been changed, route guidance
may provide wrong information
such as the direction of a one
way street.

4Runner_Navi_U (L/O 0208)
v2003 MY 4Runner Navigation from Aug. ’02 Prod. (OM35799U)
While you are driving, listen to the voice
instructions as much as possible and
glance at the screen briefly and only
when it is safe. However, do not totally
rely on voice guidance. Use it just for
your information. If the system cannot
determine your current position correctly,
there is a possibility of incorrect, late or
non–voice guidance.
The data in the system may occasionally
be incomplete. Road conditions, includ-
ing driving restrictions (no left turns,
street closures, etc.) frequently change.
Therefore, before you follow any instruc-
tion from the system, look to see wheth-
er you can comply with the instruction
safely and legally.
This system cannot warn you about such
things as the safety of an area, condi-
tion of streets, and availability of emer-
gency services. If you are unsure about
the safety of an area, do not drive into
it. Under no circumstances is this sys-
tem a substitute for the driver’s per-
sonal judgement.
Use this system only in locations where
it is legal to do so. Some states/prov-
inces may have laws prohibiting video
screens within sight of the driver.

4Runner_Navi_U (L/O 0208)
vi 2003MY 4Runner Navigation from Aug. ’02 Prod. (OM35799U)
Overview of Touch Screen and Switches
Switch operation
This system is operated mainly by the
switches on the screen. To prevent
damage to the screen, lightly touch
switches on the screen with your fin-
ger. When you touch a switch on the
screen or push a button, a beep
sounds.
INFORMATION
 If the system does not respond to
a touch of a switch, move your fin-
ger away from the screen and then
touch it again.
 You cannot operate dimmed
switches.
 Wipe off fingerprints on the sur-
face of the display using a glass
cleaning cloth.
 The displayed image may become
darker and moving images may be
slightly distorted when the display
is cold.

4Runner_Navi_U (L/O 0208)
vii 2003MY 4Runner Navigation from Aug. ’02 Prod. (OM35799U)
Symbols, Switches and Buttons
L00003
Current vehicle position mark
Indicates the current position.
For details, see page 39.
MAP/VOICE tab
Touch this tab to repeat voice
guidance, cancel one touch
scroll and start guidance. For
details, see page 39.
DEST tab
Touch this tab to display the
Destination screen. For details,
see page 7.
MENU tab
Touch this tab to display the
“Menu” screen. This screen
allows you to make
adjustments or correct settings
of various options and
functions.
TILT button
Push this button to tilt the
display. For details, see page
3.
DISPLAY button
Push this button to display the
“Display” screen. For details,
see page 123.
GPS mark (Global Positioning
System)
Whenever your vehicle is
receiving signals from the GPS,
this mark is displayed. For
details, see page 60.
Map/Guidance
Touch this switch to change
the screen mode. For details,
see page 35.
Distance and time to
destination
Displays the distance and the
estimated travel time to the
destination. If you input more
than two destinations, it
displays the distance and time
to the next destination.
Touching this indication will
change it to the distance and
time to the other destinations.
The direction will be indicated
when your vehicle is off the
route. INFO button
Push this button to display the
“Information Menu” screen. For
details, see pages ii, 109, 116
and 124.
Current street name
Turn on this function to indicate
the current street name. For
details, see page 108.
NAVI button
Push this button to turn the
navigation screen on.
North–up or heading–up symbol
and scale of map
Indicates a map view with north up
or heading up. Touching this symbol
changes the map orientation. The
figure also indicates the map scale.
For details, see page 60.

4Runner_Navi_U (L/O 0208)
viii 2003 MY 4Runner Navigation from Aug. ’02 Prod. (OM35799U)
Changing the route
guidance
When you touch this switch, the
“Change route” screen will appear. For
details, see page 50.
One–touch registration of
marked point
To register the current vehicle position
as a marked point. For details, see
page 83.
Display of point of
interest
Symbols such as restaurants and hotels,
etc. can be displayed on the screen. For
details, see page 52.
Zoom in/zoom out
These switches magnify or reduce the
map scale. For details, see page 58.

4Runner_Navi_U (L/O 0208)
1
2003 MY 4Runner Navigation from Aug. ’02 Prod. (OM35799U)
BASIC FUNCTIONS
Descriptions of basic operations in frequent use
Your navigation system 3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Inputting letters and numbers 3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
How to move the cursor 5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Destination input Explains 11 ways to input your destination
Explains 11 ways to input your destination 7. . . . . . . . . . . . . . . . . . .
Explains 11 ways to input your destination
Setting and deleting destination 26. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting and deleting preferred road 32. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Search condition 34. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Route guidance screen 35. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Route overview 37. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Route preview 37. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Current position display 39. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Voice guidance 39. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Typical voice guidance prompts 40. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Registering your home 42. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Registering preset destinations 46. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Detour setting 50. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Displaying POI 52. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Turn list 53. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Map appearance 56. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Map scale 58. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Screen scrolling 59. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Orientation of the map 60. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SECTION I

4Runner_Navi_U (L/O 0208)
22003 MY 4Runner Navigation from Aug. ’02 Prod. (OM35799U)
Limitations of the navigation system 60. . . . . . . . . . . . . . . . . . . . . . . . . . .
Map database information and updates 63. . . . . . . . . . . . . . . . . . . . . . . .

4Runner_Navi_U (L/O 0208)
3
2003 MY 4Runner Navigation from Aug. ’02 Prod. (OM35799U)
L00004
You can adjust the angle of the dis-
play by pushing the “TILT” button.
Each push of the “TILT” button will
tilt the display to position 1, 2, 3 and
then back to 0 in that order.
If you turn the ignition switch off, the dis-
play will automatically move back to position
0. The display will automatically resume the
previous position you used when the ignition
switch is turned to the “ACC” or “ON” posi-
tion.
CAUTION
Take care not to jam your hand
while the display is moving. Other-
wise, you could be injured.
NOTICE
Do not obstruct the display while it
is moving. It could damage your nav-
igation system.
The navigation system is operated by
switches on the screen and the but-
tons located on the front face around
the screen. When you touch a switch
or push a button, a beep sounds.
When using the switches on the touch
screen, please use only light pressure
with your finger to protect the screen
from damage. Do not use objects other
than your finger to touch the screen.
L00013
To type in an address etc., directly touch
alphabet keys on the screen. If you touch
a wrong letter, delete it using the
switch. Touching the switch erases
one letter.
Your navigation system Inputting letters and numbers

4Runner_Navi_U (L/O 0208)
42003 MY 4Runner Navigation from Aug. ’02 Prod. (OM35799U)
Touching the “List” switch will change
the screen to a display of the database
items that match the name or address
that you have entered on the screen. The
number of matching items is shown to
the right side of the screen. If the match-
ing item is more than 9,999, the system
displays “”on the screen.
To input numerals, touch the “0–9”
switch and the display will change the
screen to number input display.
L00014
Touching the “A–Z” switch changes the
screen back to the previous name input
display.
L00015
When a list is displayed, you can scroll
or page through the list by using the
appropriate switch.
To shift to the next or previous
page.
To scroll up or down one item
at a time.
This expresses a displayed
screen position.
If appears to the right of the
item name, the complete name
is too long for the display.
Touch , and the name will
scroll to the end of the name.
Touching will scroll the
name to the beginning of the
name.

4Runner_Navi_U (L/O 0208)
5
2003 MY 4Runner Navigation from Aug. ’02 Prod. (OM35799U)
L00016
1. Touch the “Adjust” switch to move the cursor .
How to move the cursor

4Runner_Navi_U (L/O 0208)
62003 MY 4Runner Navigation from Aug. ’02 Prod. (OM35799U)
L00017
 Position locating screen on the map
2. When you touch an arrow facing your desired point, the map scrolls in that direction. When you release your finger,
scrolling stops.
3. If you touch the “Enter” switch, the position of cursor is set.

4Runner_Navi_U (L/O 0208)
7
2003 MY 4Runner Navigation from Aug. ’02 Prod. (OM35799U)
Touch the “DEST” tab on the screen
and the “Destination” screen appears.
L00018
The “Destination” screen allows you to
select the area to search for your des-
tination.
Touch the “Change” switch on the
“Destination” screen to display a map
of the United States and Canada divid-
ed into 11 areas. See page 63 for map
database information and updates.
L00019
Touch one of the “US1” through
“CAN” switches to select a search
area. Touch the “OK” switch and the
“Destination” screen returns.
Once you choose the area to search, you
can use one of 11 different methods to
enter your destination.
USA
Switch States included in the search
area
US1 Idaho
Oregon
Washington
US2 California
Nevada
US3
Arizona
Colorado
Montana
New Mexico
Utah
Wyoming
US4
Iowa
Kansas
Minnesota
Missouri
Nebraska
North Dakota
South Dakota
US5 Oklahoma
Texas
US6
Illinois
Indiana
Kentucky
Michigan
Ohio
Wisconsin
Destination input

4Runner_Navi_U (L/O 0208)
82003 MY 4Runner Navigation from Aug. ’02 Prod. (OM35799U)
US7
Alabama
Arkansas
Louisiana
Mississippi
Tennessee
US8
Connecticut
Maine
Massachusetts
New Hampshire
New Jersey
New York
Rhode Island
Vermont
US9
Delaware
Maryland
New Jersey
Pennsylvania
Virginia
Washington, D.C.
West Virginia
US10 Florida
Georgia
North Carolina
South Carolina
Canada
Switch Provinces and regions included
in the search area
CAN
Alberta
British Columbia
Manitoba
New Brunswick
Newfoundland and Labrac
Nova Scotia
Ontario
Prince Edward Island
Québec
Saskatchewan
You can find your destination using vari-
ous methods. See pages 11 through 25
for the detailed steps.
1. By Home ( switch on the “Destination” screen): You can select your own home without entering the address each time.
To use this function, it is necessary to register your home beforehand. See page 11 for the detailed steps.
2. By Preset Destination ( — switches on the “Destination” screen): You can select one of 5 preset destinations
directly. To use this function, it is necessary to register the destinations beforehand. See page 12 for the detailed steps.

4Runner_Navi_U (L/O 0208)
9
2003 MY 4Runner Navigation from Aug. ’02 Prod. (OM35799U)
3. By Address: You can input the house number and the street address by using the input keys. See page 12 for the detailed
steps.
4. By POI: You can select one of the many points of interest that have been already stored in the system’s database. There are
about 50 categories to choose from, including restaurants, banks and automotive locations. See page 15 for the detailed steps.

4Runner_Navi_U (L/O 0208)
10 2003 MY 4Runner Navigation from Aug. ’02 Prod. (OM35799U)
5. By Marked Point: You can register your own favorite destinations as a “Marked Point”. The system allows you to store up 100
marked points. See page 20 for the detailed steps.
6. By Previous Destination: You can select a destination from any of the last 20 previously set destinations. See page 21 for
the detailed steps.
7. By Emergency: You can select one of the three points of emergency service points that have been already stored in the system’s
database. See page 22 for the detailed steps.
8. By Intersection: You can enter the names of two intersecting streets. This is helpful if you do not know the specific street
address of your destination but know the general vicinity. See page 23 for the detailed steps.
9. By Freeway Entrance/Exit: You can enter the name of the freeway (interstate) entrance or exit. See page 24 for the detailed
steps.
10. By Previous Starting Point: You can enter a point where the system has started to guide last time. See page 25 for the detailed
steps.

4Runner_Navi_U (L/O 0208)
11
2003 MY 4Runner Navigation from Aug. ’02 Prod. (OM35799U)
11. By Map Selection: You can select a destination simply by touching the location on the displayed map. See page 25 for the
detailed steps.
INFORMATION
 When inputting the destination, the
response to the switch may be
slow.
 “Points of Interest” registration is
made based on the NAVTECH
“Standard POI Inclusion List” and
infoUSA POI data.
 If there is no point registered,
switches such as “Marked Point”,
“Previous Destination” and “Pre-
vious Starting Point” are dimmed
and not available.
 The route for returning may not be
the same as that for going.
 The route guidance to the destina-
tion may not be the shortest route
or a route without traffic conges-
tion.
 Route guidance may not be avail-
able if there is no road data for the
specified location.
 When setting the destination, you
should use the map on a scale of
one half mile or smaller.
 To select an “Address”, “Point of
Interest”, “Freeway Entrance/Exit”
or “Intersection” in a different area,
it is necessary to change the
search area.
CAUTION
While you are driving, be sure to
follow traffic regulations and keep
the road condition in mind. If a traf-
fic sign on the road has been
changed, the route guidance may
provide wrong information.
Touch the switch on the Destina-
tion input screen.
The screen changes and displays the
map location of your home.
Guidance starts from your current posi-
tion to your home immediately after you
touch the switch during driving.
For the steps to register your home, see
“Registering your home” on page 42.
Destination input by HOME

4Runner_Navi_U (L/O 0208)
12 2003 MY 4Runner Navigation from Aug. ’02 Prod. (OM35799U)
Touch any of — (preset des-
tination) switches on the “Destination”
screen.
The screen changes and displays the
map location of the preset destination.
Guidance starts from your current posi-
tion to the preset destination immediately
after you touch the preset destination
switch.
For the steps to register a preset destina-
tion, see “Registering preset destination”
on page 46.
L00020
There are 2 ways to input a destina-
tion by address.
Touch the “Address” switch on the
destination screen. The “Address”
screen appears, and then you can in-
put a house number.
Touch letters directly on the screen to
input a house number.
L00021
After inputting a house number, touch the
“Enter” switch to display the screen
which you can input a street name.
It is possible to input a street name first.
Touch the “Street” switch to display
the screen which you can input a street
name.
Destination input by PRESET
DESTINATION Destination input by ADDRESS (a) Inputting a house number and a street name