Toyota Avalon 2013 User manual

NAVIGATION SYSTEM
WITH ENTUNE
QUICK REFERENCE GUIDE
CUSTOMER EXPERIENCE CENTER
1-80 0 -331-4 3 31
00505 -NAV13-AVA
Printed in U.S.A. 10/12
12-TCS-05911
2013
AVALON

1
TABLE OF CONTENTS
OVERVIEW 2
Limitations of the Quick Reference Guide 2
Basic Operation 2
CONNECT A BLUETOOTH PHONE 3
CALLING BY VOICE RECOGNITION 4
Dial by Number 4
Dial by Name 5
DESTINATION INPUT 6
By Address 6
Note on Voice Recognition 8
Tips for Using Voice Recognition 8
By Address - Voice Recognition 8
DESTINATION INPUT - POINT OF INTEREST (POI) 10
Point of Interest by Name 10
Point of Interest by Category 11
Point of Interest by Category - Voice Recognition 12
SET HOME 13
ADDITIONAL NAVIGATION FEATURES 15
Operation of Emergency Screen 15
Search Area 15
Route Preferences 15
3 Routes 15
Screen Configurations 15
Beep Setting 16
Voice Volume 16
Language 16
System Time 16
Auto Screen Change 16
Estimated Distance and Time 16
NAVTRAFFIC 17
Show Navtraffic Information 17
Automatically Avoid Traffic 18
Traffic Incident Warning 18
Show Free Flowing Traffic 19
NAVWEATHER, SPORTS, STOCKS AND FUEL 20
ENTUNE™ - INTRODUCTION 21
What is Entune? 21
Entune 21
Phone Compatibility 22
ENTUNE - HOW TO GET STARTED 23
Basic Overview 23
ENTUNE - NEW CUSTOMER REGISTRATION 24
Account Creation 24
Downloading Entune App to Your Phone 24
Launch App 24
Connect Phone 24
Accessing Entune Apps 24

2
The Quick Reference Guide is designed to provide information on the basic operation and
key features of the navigation system and Entune™(apps and data services). The Quick
Reference Guide is not intended as a substitute for the Navigation Owner’s Manual. We strongly
encourage you to review the Navigation Owner’s Manual, the quick reference guide and visit
www.toyota.com/entune so you will have a better understanding of all your vehicles features and
controls.
OVERVIEW
ZOOM IN/ZOOM OUT Icons
Touch to magnify or reduce the map
scale.
MAP/VOICE Button
Repeat the last voice guidance prompt,
cancel the map scrolling feature, or
display the current position.
DESTINATION Button
Input the destination by one of several
methods.
SETUP Button
Adjust preferences for general settings,
voice, navigation, vehicle maintenance,
phone, bluetooth and audio.
INFO/APPS Button
Access apps, fuel consumption, traffic,
fuel prices, sports, stocks, weather and
map data.
CURRENT VEHICLE POSITION Mark
Indicates the current position of the
vehicle and its directional heading.
NORTH-UP OR COMPASS MODE Icon
Touch to change the map display between
North-up or Head-up perspectives.
1
2
3
4
5
6
7
2 3
5 47 6
1
LIMITATIONS OF THE QUICK REFERENCE GUIDE
BASIC OPERATION

3
CONNECT A BLUETOOTH PHONE
Press on the faceplate
followed by . Verify that
the Bluetooth feature on the phone is
ON and is in discoverable mode.
step 2
step 3
step 1If necessary, input the passkey listed on
the screen into the approved Bluetooth
cell phone. Please refer to the cell
phone manufacturer’s user guide for
pairing procedures.
Upon connection, the system will
indicate that the pairing process was
successful.
Quick Tip - Up to five Bluetooth cell phones can be
paired. However, only one Bluetooth cell phone can
be used at a time.
If you are able to successfully transfer your phone book, you can dial by name using voice recognition.
Please say the name exactly as it is entered in your phone when in the telephone screen. If you have
difficulty pairing your phone, or are unable to transfer your cell phone book, please refer to the cell phone
manufacturer's user guide.

4
CALLING BY VOICE RECOGNITION
After the beep say, “Dial <number>.”
Say the phone number digits
individually, without pausing (e.g. “Dial
Three, one, zero, four…”).
step 2
step 3
Press on the steering wheel. After
the beep say, “Use the Phone.”
step 1
After the beep, say “Dial” or press
on the steering wheel.
Call is active when is
indicated. To end call, press
on the screen or on the steering
wheel.
step 4
Quick Tip - It is recommended that you reduce
background noise prior to using the Voice
Recognition system. Conversation, high fan speed,
wind noise (open windows), etc., may prevent the
voice recognition system from understanding your
commands.
Quick Tip - If you know your next command, you
can press at any time to interrupt the prompt.
Speak your command after the beep.
Some Bluetooth®equipped cell
phones may or may not show battery or signal strength
on the display.
DIAL BY NUMBER
Quick Tip - You can skip Step 1 and say Dial
commands immediately from the Shortcut Menu.

5
CALLING BY VOICE RECOGNITION
DIAL BY NAME
Press on the steering wheel. After
the beep say, “Use the Phone.”
step 1
Quick Tip - If you know your next command, you
can press at any time to interrupt the prompt.
Speak your command after the beep.
After the beep say, “Call <name>.”
Please say the name exactly as it is
entered in your phone.
step 2
step 3After the beep, say “Dial” or press
on the steering wheel. step 4Call is active when is
indicated. To end call, press
on the screen or on the steering
wheel.
If you are able to successfully transfer your phone book, you can dial by name using voice recognition.
Please say the name exactly as it is entered in your phone when in the telephone screen. If you have
difficulty pairing your phone, or are unable to transfer your cell phone book, please refer to the cell phone
manufacturer's user guide.
Quick Tip - You can skip Step 1 and say Dial
commands immediately from the Shortcut Menu.

6
DESTINATION INPUT
BY ADDRESS
Press on the faceplate
followed by .
Touch and move to
step 4. To change State/Province, touch
and move to step 3.
Input the city name.
Touch the desired city name. Input the street name and touch
.
Select the desired State/Province.
step 1step 2
step 3step 4
step 5step 6
Quick Tip - Enter the street name without prefixes
such as North or the letter N. The system will display
the base street name without prefixes or suffixes on
the next screen.

7
DESTINATION INPUT
BY ADDRESS
Touch .
Input the house number and touch
.
Touch the desired street name.
Touch followed by
.
step 7step 8
step 9step 10
Select the desired Route
Preferences and touch to
confirm selection. See page 15 for
route selection.
step 11 Touch to start route
guidance.
step 12

8
DESTINATION INPUT
step 1step 2
Press on the steering wheel. After
the beep say, “Enter an Address.”
After the beep say the city name or,
"Change state" to search in another
state.
TIPS FOR USING VOICE RECOGNITION
NOTE ON VOICE RECOGNITION
Say a street address number as single
digits. Examples:
125, say: “One two five”
2000, say: “Two zero zero zero”
32307, say: “Three two three zero
seven”
tip1tip 2
tip 3tip 4
tip 5
Have the full and correct address in mind.
The system will ask for the state, city, and
street name followed by the house number
as separate inputs.
Before using voice recognition, roll up all
windows and set the climate control fan on
low or off to reduce background noise in
the cabin.
Speak at a normal volume and pace, and
pronounce words clearly.
Streets should be spoken without prefixes or
suffixes. Street names should be spoken as
in these examples:
1st Street, say: "First"
E 15th Street, say" "Fifteenth"
190th Street, say "One hundred ninetieth"
Point Court, say "Point"
A large TALK icon will illuminate on the
NAV screen to signal when to speak your
command.
The navigation system's voice recognition feature will compare your spoken words with
computer-generated word patterns preprogrammed in the database. If the system does not
provide your intended match, please try a different pronunciation. Voice-activation names are
not available for every street and city.
BY ADDRESS-VOICE RECOGNITION
Quick Tip - If you know your next command, you
can press at any time to interrupt the prompt.
Speak your command after the beep.
tip 6

9
DESTINATION INPUT
BY ADDRESS-VOICE RECOGNITION
step 3step 4
step 5step 6
step 7
After the beep say, “Start Guidance.”
Touch to start route guidance.
After the beep say the street name. After the beep say the house number as
single digits.
If necessary, after the beep say, “Yes”
to confirm address.