TP-Link TL-PBB3000 Operating instructions

Slim but Powerful
Battery Button
TL-PBB3000
Output (5V/1.5A)
Input (5V/1A)
LED Indicator

LED indicator: On Blinking Off
How to use?
Low battery
Check battery level
Press the Battery Button to check the
battery level. We recommend charging
it when the LED blinks.
Sufficient battery
Low battery
Charge other devices
Sufficient battery
Plug in your device to the Power Bank’s
output port via a USB cable.
©2016 TP-LINK
If you have any questions related to this product,
please refer to the support page at www.tp-link.com.
Tel: [phone]
Attention
Keep this device away from water, fire, and extreme
temperatures.
Do not deliberately drop or impact this device.
Do not attempt to extrude or pierce this device, which may
cause it to short circuit.
Do not attempt to disassemble, modify or repair this device
yourself.
Do not use a damaged wall charger or USB charging cable to
charge this device.
If the product appears to be bulging or any other visible
abnormalities, stop using the product immediately and contact
us or distributor.
Please recycle this device at an approved disposal location.
Please charge this device once every three months to avoid
shortening its battery life.
Please use the recommended power adapter to charge this
device. Power adapter is not provided by TP-LINK.
7106506027 REV1.0.0
Charge the Power Bank
Plug in the Power Bank to a wall outlet or
to your computer’s USB port via a USB
cable. Please charge the power bank
before first use.
Charging Fully charged