TP-Link TL-PBG13400 User manual

Power Button
Micro-USB Input
Smart Output
QC Output
TL-PBG13400
More Powerful
More Reliable
Power Indicator LED

Charging the Power Bank (Max. Input: 5V/2A)
Plug in the Power Bank to a wall charger or your computer's USB port via a
USB charging cable.
How to use?
Checking the Battery status
Charging device with SMART port
Plug in the USB charging cable to the SMART port to charge your device.
(SMART Max. Output: 5V/2.4A)
In
Smart
Charging device with QC port
Plug in the USB charging cable to the QC port to charge your device. (QC
Max. Output: 5V/3A, 9V/2A, 12V/1.5A)
Press the Power button to check the current battery level. We recommend
to charge it when the last indicator LED is blinking.
7106507198 REV1.0.1 ©2017 TP-Link
Attention
Keep this device away from water, re, and extreme temperatures.
Do not deliberately drop or impact this device.
Do not attempt to extrude or pierce this device, which may cause it
to short circuit.
Do not attempt to disassemble, modify or repair this device
yourself.
Do not use a damaged wall charger or USB charging cable to
charge this device.
If the product appears to be bulging or any other visible
abnormalities, stop using the product immediately and contact us
or distributor.
Please recycle this device at an approved disposal location.
This product is not suitable for those lacking relevant knowledge
and experience, please use under the supervision and guidance of
professionals.
Please charge this device once every three months to avoid
shortening its battery life.
Please use the recommended power adapter to charge this device.
Power adapter is not provided by TP-Link.
Tel:
E-mail:
Web:
[phone]
[e-mail]
http://www.tp-link.com/support
Technical Support