TP-Link Tapo Smart Contact Sensor User manual

User Guide
Tapo Smart Contact Sensor
© 2022 TP-Link 1910013285 REV1.0.0

Contents
About This Guide ···················································· 1
Introduction ······························································· 2
Tapo Smart Ecosystem······································· 3
Automate Your Home··········································· 4
Set Up Your Smart Sensor································· 5
Use Your Smart Sensor······································· 8
Explore Smart Actions·······································10
How to Create Smart Actions························11
How to Replace the Battery ····························13
How to Reset Your Smart Sensor ················14
Authentication························································15

1
About This Guide
This guide provides a brief introduction to the Smart Contact Sensor and the Tapo app, as well as regulatory information.
Please note that features available in Tapo may vary by model and software version. Tapo availability may also vary by region. All images, steps, and
descriptions in this guide are only examples and may not reect your actual Tapo experience.
Conventions
In this guide, the following convention is used:
Convention Description
Blue Key information appears in blue, including management page text such as menus, items, buttons and so on.
Underline Hyperlinks are in blue and underlined. You can click to redirect to a website.
Note: Ignoring this type of note might result in a malfunction or damage to the device.
More Info
• Specications can be found on the product page at https://www.tapo.com.
• Our Technical Support and troubleshooting information can be found at https://www.tapo.com/support/.
• The setup videos can be found at https://www.tp-link.com/support/ setup-video/#smart-sensors.

2
Introduction
Know when doors/windows are opened or closed. Check on your doors and windows at a glance with the Tapo app and receive instant alerts. This
makes your home safer and smarter.
• Window/Door Safeguard - Monitors the opening & closing of windows, doors, cabinets, the fridge, or the mailbox in real time.
• Instant App Notication - Is your parcel locked away? Find out immediately with instant notications.
• Smart Action Support - Connect the actions with other smart devices for a welcome return home.
• Easy Installation - Mount to nearly any surface with included 3M adhesive.
• Great Compatibility - Just one part of the integrated Tapo ecosystem.
• Battery Powered – Battery-powered design with 1+ year battery life. (Based on the testing of 30 triggers a day.)
• Device Sharing – Easily share management permissions with each member of your family.
• Easy Setup and Use – Set up quickly and easily through the free Tapo app.
LED Light
Sensor
Magnet
Magnet
Alignment
Mark Battery
Compartment
Reset Button

3
Tapo Smart Ecosystem
Tapo is the easy way to turn your home into a smart home. With the Tapo Hub as a bridge, Tapo Smart Sensor works with a wide range of Tapo
accessories. So you can easily control and monitor your home from anywhere.
Smart
Button
Motion
Sensor Temperature &
Humidity
Sensor
Smart
Switch

4
Tapo T110
Automate Your Home
Create a Smart Action to automate your smart devices. Customize your own Smart Actions to group your Tapo products together any way you want.
Light the Way When Arriving Home
Turn on the light automatically when you open
the door.
Tapo T110
Tapo Hub
Smart Lighitng
Build Smart Alarm
Trigger hub alarm and send you app notications
when someone opens the door or window.
Secure Door/Window
Your Hub will ring if you forget to close the door.
OR

5
1. Set Up Your Sensor
Tap the button in the Tapo app, tap
Sensors, and select your model. Follow the
instructions in the Tapo app to complete the
setup.
2. Check the LED & Set Up
Check if the LED blinks. If not, use a pin to
press and hold the Reset button for 5s. Follow
app instructions to complete the setup.
Set Up Your Smart Sensor
Watch setup videos at https://www.tp-link.com/support/download/tapo-t110/
Before You Start
A Tapo Hub is required. Make sure your Tapo
Hub is successfully added via the Tapo app.
OR

6
3. Test Your Sensor
a. Open and close the sensor to test it in your
preferred location.
b. Check the Event Log on the Tapo app to
conrm the open/closed status.
4. Mount Your Sensor
a. Stick the included adhesives
on the sensor and magnet.
b. Choose where you’d like to install the sensor (but don’t
attach it yet). Place the magnet near the edge of the door
or window that moves.
Notes:
· Leave at least 0.39 inches (10 mm) of space so you can open the battery compartment.
· Installation height should not be higher than 6.56 ft (2 m).
x2
x1
≥ 0.39 inches (10 mm)

7
c. Align the magnet and sensor with no more than 0.59 inches (15 mm) between them when the door or window is closed.
Peel the backing from the adhesive and press the sensor and magnet into place.
≤ 0.59 inches (15 mm)
Alignment
Lines

8
Home Page Settings
Long press on a card, then you can reorder
cards, tap to remove your device from your
account, share your device, favorite/unfavorite
device, or relocate your device to other Home.
Status Page
You can check all events of you sensor. Slide
the panel up to check more settings or tap the
gear icon to enter the Settings page.
Use Your Smart Sensor
After you successfully set up your hub and sensor, you will see your devices listed on the home page. With the Tapo app, you can view and manage
your devices and get instant notications anytime, anywhere.
Home Page
This page lists all the devices you've added
and you can view them directly and manage
them easily. Tap the card to enter its Status
page.

9
Device Settings
Check/edit the basic info, set Notications
settings, view User Manual and Placement
Guide, or remove your device from your
account.
Notications Settings
Turn on Notications if you want to receive
app notications when your sensor detects an
event. Set the time you want to be notied.
Featured Smart Actions
The sensor can work with other Tapo devices
to automate your home. You can customize
smart actions based on the templates.

10
Explore Smart Actions
The sensor can work with other Tapo devices to automate your home. Trigger dierent actions when it is opened or closed. You can customize smart
actions based on the templates. This makes your home safer and smarter.
Smart Actions What can this Smart Action do? Tapo Device Requirement
Build a smart alarm
when you sleep
When someone opens the door or
window at night, the hub will sound
an alarm.
Hub with alarm feature
Light the way when
arriving home
When you arrive home, the light will
automatically turn on the moment
you open the door.
Hub + Bulb/Light Strip/Plug/
Switch
Make sure the door/
window is closed
If you forget to close the door/
window, the hub will ring. Hub with alarm feature

11
2. Choose a template and customize the
smart action based on the template.
3. Select devices you want to take action
when the sensor detects an event.
How to Create Smart Actions
Choose a Smart Action template, choose devices, and customize the settings as needed.
1. On the Status page, tap Explore Smart
Actions.

12
5. Set the eective time for this smart action.4. Customize the settings as needed. Turn
on Delay Action if you want the action to take
place some time after the sensor detects an
event.
Done! You can go to Smart (Smart Actions) >
Automation to check the item. Toggle on/o
to enable/disable the action, tap to edit, and
swipe right to delete.

13
How to Replace the Battery
Watch videos at https://www.tp-link.com/support/download/tapo-t110/
Remove the screw securing the battery and remove the old battery. Insert
the new battery into the battery compartment, making sure the battery is
level and its positive side is facing up. Then replace the cover.
If you haven’t installed it on a door or window:
Slide to remove the cover.
OPEN
· If you have installed it on a door or window:
Remove the cover of your sensor by pushing the cover up.
OPEN

14
How to Reset Your Smart Sensor
Watch videos at https://www.tp-link.com/support/download/tapo-t110/
Option 2. Via the Tapo App
Long press the card on the home page and tap or go to the Device Settings
page and tap the Remove button to remove your sensor from your account.
OR
Option 1. Via Reset Button
Remove the cover, then use a pin to press and hold the Reset button
for 5 seconds until the front LED starts blinking.
5s

15
Authentication
FCC Compliance Information Statement
Product Name: Tapo Smart Contact Sensor
Model Number: Tapo T110
Responsible party:
TP-Link USA Corporation
Address: 10 Mauchly, Irvine, CA 92618
Website: http://www.tp-link.com/us/
Tel: [phone]
Fax: [phone]
E-mail: [email protected]om
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

16
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the
equipment.
Note: The manufacturer is not responsible for anyradio or TV interference caused by unauthorized modifications to this equipment. Such modifications
could void the user’s authority to operate the equipment.
FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be
co-located or operating in conjunction with any other antenna or transmitter.
“To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this
transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction
with any other antenna or transmitter.”
We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards,
FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.
Issue Date: 2022.10.31

17
CE Mark Warning
This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take
adequate measures.
Operating Frequency / Nominal Operating Frequency / Max Output Power:
863~865MHz / 863.35MHz / 25mW (e.r.p)
863~865MHz / 864.35MHz / 25mW (e.r.p)
868~868.6MHz / 868.35MHz / 25mW (e.r.p)
EU declaration of conformity
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU,
2009/125/EC, 2011 /65/EU and (EU) 2015/863.
The original EU declaration of conformity may be found at https://www.tapo.com/en/support/ce/
RF Exposure Information
This device meets the EU requirements (2014/53/EU Article 3.1a) on the limitation of exposure of the general public to electromagnetic fields by way
of health protection.
The device complies with RF specifications when the device used at 20 cm from your body.
Restricted to indoor use.
UKCA Mark
UK Declaration of Conformity
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Radio Equipment
Regulations 2017.

18
The original UK declaration of conformity may be found at https://www.tapo.com/support/ukca/
Korea Warning Statements:
당해 무선설비는 운용중 전파혼신 가능성이 있음.
NCC Notice
注意！
取得審驗證明之低功率射頻器材，非經核准，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。
低功率射頻器材之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。
前述合法通信，指依電信管理法規定作業之無線電通信。
低功率射頻器材須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。
Продукт сертифіковано згідно с правилами системи УкрСЕПРО на відповідність вимогам нормативних документів та вимогам,
що передбачені чинними законодавчими актами України.
Safety Information
• Keep the device away from water, fire, humidity or hot environments.
• Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
• Do not use the device where wireless devices are not allowed.
• Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due
to improper use of the device. Please use this product with care and operate at your own risk.
• Do not ingest battery, Chemical Burn Hazard
CAUTION!
Risk of explosion if the battery is replaced by an incorrect type