TP-Link Kasa Smart KP200 User manual

User Guide
Kasa Smart Wi-Fi Outlet
KP200
© 2021 TP-Link 1910012993 REV3.0.0
Downloaded from ManualsNet.com search engine

Contents
About This Guide ···················································· 1
Introduction ······························································· 2
Appearance ······························································· 3
Set Up Your Smart Outlet··································· 4
Main Device Controls·········································10
Set Schedules ························································11
Set Timer···································································13
Set Away Mode······················································14
Check Runtime·······················································15
Manage Device Settings ··································16
Reset Your Smart Outlet ···································21
Create Groups························································24
Create Scenes························································28
Smart Actions·························································30
Voice & 3rd Party Support·······························43
Authentication························································47
Downloaded from ManualsNet.com search engine

1
About This Guide
This guide provides a brief introduction to smart outlet and the Kasa Smart app, as well as regulatory information.
Features available of this product and in Kasa Smart may vary by model and software version. Smart outlet and Kasa Smart availability may also vary by
region. All images, steps, and descriptions in this guide are only examples and may not reect your actual experience.
Conventions
In this guide, the following convention is used:
Convention Description
Teal Key information appears in teal, including management page text such as menus, items, buttons and so on.
Underline Hyperlinks are in teal and underlined. You can click to redirect to a website.
More Info
• Specications can be found on the product page at https://www.tp-link.com.
• Our Technical Support and troubleshooting information can be found at https://www.tp-link.com/support.
Downloaded from ManualsNet.com search engine

2
Introduction
Everything you enjoy about smart outlets, now in a discreet in-wall smart power outlet. Revamp your living spaces and experience a new way to control
your home. Turn each outlet on/o individually, set schedules, and even use simple voice commands with Alexa and Google Assistant to control your
devices. The Kasa app provides easy step-by-step installation instructions and convenient remote control from anywhere.
Individual Control Remote Control Set Schedules
Tamper Resistant Away Mode
• Individual Control - Let you individually control devices plugged into the outlet from anywhere.
• Remote Control - Turn your outlet on/o or set schedules from anywhere using your Kasa Smart app.
• Tamper Resistant - Built-in safety shutters prevent childhood shock by blocking foreign objects insertion.
• Set Schedules - Individually schedule each device connected to your outlet to automatically switch on/o at set times.
• Away Mode - For better security, set your outlet to randomly turn on/o a lamp, to make your home appear occupied when you’re away.
Max Load
Input: 125V~, 60Hz, 15A
Output: 15A maximum load in total
15 A resistive load / general purpose use
1.96 A incandescent
1/2 HP motor
Downloaded from ManualsNet.com search engine

3
Appearance
Smart Wi-Fi Outlet has 2 individual smart outlets, with control buttons to turn on/o devices plugged in. The System LED changes color according to
its status. See the explanation below:
Smart Outlet * 2
Plug in your device and control it from your smartphone.
Each outlet is independent.
Control Button * 2
· Press the button to turn on or o the corresponding outlet.
·Press and hold a button for 5s to re-enter setup mode.
·Press and hold a button for 10s to restore KP200 to factory default settings.
Green
Connected to Wi-Fi network successfully
Blinking Amber
Resetting
Blinking Green
Searching for Wi-Fi
Red
No Wi-Fi connection
Blinking Amber and Green
Ready for setup
Downloaded from ManualsNet.com search engine

4
Set Up Your Smart Outlet
Follow the steps below to set up your Smart Outlet via Kasa Smart app.
1. Download and install Kasa app
Get the Kasa Smart app from the App Store
or Google Play, or by scanning the QR code
below.
2. Log in or sign up with TP-Link ID
Open the app, and log in with your TP-Link ID.
If you don't have an account, create one rst.
3. Add Device
Tap the + button in the Kasa app, go to Smart
Plug > Smart Outlet and then follow app
instructions to install and complete the setup.
Downloaded from ManualsNet.com search engine

5
4. Wire Your Smart Outlet
1) Turn o Power. Then remove the old wallplate and expose the outlet wiring. 2) Choose Type 1 to continue.
Downloaded from ManualsNet.com search engine

6
3) Identify the Ground, Line, and Neutral wires. 4) Disconnect the wires.
Downloaded from ManualsNet.com search engine

7
5) Connect the wires to the terminals of your Smart Outlet. Double check to
make sure all wires are correct.
6) Gently fold all of the wires back into the wallbox. Secure
the Smart Outlet with provided screws.
Notice: For the sake of safety, the naked part of the wire should not be too long.
Wires extending out the Smart Outlet should have sucient insulation.
Downloaded from ManualsNet.com search engine

8
7) Turn on power and check if the Wi-Fi LED of the Smart Outlet is on.
Downloaded from ManualsNet.com search engine

9
5. Complete Setup
Tap Connect to Wi-Fi and follow app instructions to connect the Smart Outlet to Wi-Fi.
Downloaded from ManualsNet.com search engine

10
Main Device Controls
After you successfully set up your Smart Outlet, you will see the home page of the Kasa Smart app. Here you can view and manage all devices that
you've added to Kasa. The two outlets are listed in the home page. Tap each of the outlets to control and manage them individually.
Home Page
You can see all your Kasa devices listed in the Home page.
Turn on/o the outlet
Turn on/o your each outlet quickly by tapping the switch in the Home page. Tapping
the device to enter its status page, you can also check or change its status.
Downloaded from ManualsNet.com search engine

11
Set Schedules
Schedule: Set schedules to automatically turn on/o the devices connected to your Smart Outlet according
to your daily routine.
1. Tap either outlet in the Home page, and
then Tap .
2. Tap + on the top right corner. 2. Set a schedule to turn the connected
device on or o.
E.g. I want to turn on the plugged-in living
room light at 10:00 PM every day.
Downloaded from ManualsNet.com search engine

12
4. You can also choose to turn on/o the outlet simply
at Sunrise or Sunset.
*The Sunrise and Sunset times are based on your location.
5. Tap Save and you'll see your schedule listed in the Schedule Page. You can
turn on or o the schedule at any time or add more schedules following the
same steps.
Downloaded from ManualsNet.com search engine

13
Set Timer
Timer: Set the timer for the connected devices to automatically turn on/o after the specied time.
1. Tap either outlet in the Home page, and
then tap .
2. Set the time after which the connected
device will be automatically turned on/o.
E.g. whenever I turn on the living room light,
I want it to turn o automatically after 30
minutes.
2. Tap START and you'll see the timer starts
counting down. Tap STOP to stop the Timer
at any time.
Downloaded from ManualsNet.com search engine

14
Set Away Mode
Away Mode: Set Away Mode for the connected devices to turn on/o automatically at random intervals
while you are away to make the appearance that someone is at home.
1. Tap either outlet in the Home page, and
then tap .
2. Set the start and end time during which the connected devices will be automatically turned on
and o at random intervals, then choose the repeating frequency.
Note: The start and end time must be on the same day.
E.g. I want my living room light to turn on/o from 6:00 PM to 11:59 PM every Friday, Saturday and
Sunday.
Downloaded from ManualsNet.com search engine

15
Check Runtime
Runtime: Check runtime to keep track of how long either outlet of your Smart Outlet has been working.
1. Tap either outlet in the Home page, and
then tap .
2. Check the runtime for today, the past 7
days, or the past 30 days.
Downloaded from ManualsNet.com search engine

16
Manage Device Settings
1. Tap either outlet in the Home page and
then tap .
2. Here you can customize settings of each outlet of your Smart Outlet.
Downloaded from ManualsNet.com search engine

17
1. Change name and icon
Tap either outlet to change its name and icon.
Downloaded from ManualsNet.com search engine

18
2. Swap between the two outlets
Tap Swap to quickly swap the appliances connected to the two outlets of your device.
Downloaded from ManualsNet.com search engine