TP-Link LB1 Series User manual

Smart Wi-Fi LED Bulb Installation
Quick Start Guide
LB1XX Series
Important Information
Before installing or replacing the Smart Bulbs, read and follow all precautions,
including the following:
• WARNING: RISK OF ELECTRIC SHOCK OR BURNS. Switch OFF the light
switch controlling the bulb and WAIT for the bulb to cool down before
attempting to change it.
• Do not install the Smart Bulb with wet hands or when standing on wet or
damp surfaces.
• Not suitable for use with standard in-wall dimmers. Dimmable via the app
only.
• Suitable for use in operating environment between -20°C and 40°C (-4°F and
104°F).
• NOT FOR EMERGENCY LIGHTING.
1 Download TP-LINK Kasa from App Store or
Google Play.
2 Connect mobile device to your 2.4GHz Wi-Fi network.
Note: The Smart Bulbs only support 2.4GHz networks.
3 Launch Kasa and follow the in-app instructions to
connect the Smart Bulb to your home network.
OR
Scan QR
code
7106506484 REV 1.0.1
Create Account
Skip
Forgot password?
LOG IN
Password
Email
Log in to access your devices.
Welcome
home
Sketch9:41 AM 100% Sketch9:41 AM 100%
DONE
Great!
Your Smart Bulb is all set up. It is
now saved in your Device List.
Sketch9:41 AM 100%
Install your Smart Bulb
First, make sure the power is off on
the light you’re replacing. Swap the
current bulb with your Smart Bulb.
NEXT

Frequently Asked Questions
1. The Smart Bulb appears offline or unreachable, what should I
do?
• Check the light switch and make sure that it’s switched to
ON. The Smart Bulb requires an “always-on” power supply to
operate properly.
• Make sure you are connected to the same Wi-Fi network to
control it locally. To control the Smart Bulb outside of your
home, sign in to your Kasa account and enable Remote
Control.
• Reset the Smart Bulb and reconnect it to your Wi-Fi network.
2. How do I reset my Smart Bulb?
• To reset without losing your configuration settings, turn the
light switch controlling the bulb to OFF first, then flip the
light switch on and off 3 times.
• To factory reset, turn the light switch controlling the bulb to
OFF first, then flip the light switch on and off 5 times. Note
that factory resetting the Smart Bulb will erase all of your
custom settings, and you’ll have to set it up again.
3. Can I control the Smart Bulbs from multiple devices?
Yes. Download TP-LINK Kasa to your devices and sign in using
the same Kasa account.
4. How do I pair the Smart Bulbs with Amazon Echo?
Visit www.tp-link.com/en/faq-944.html or within the Kasa
Help section for pairing instructions.
© 2016 TP-LINK. All rights reserved.
Specifications are subject to change without notice. is a registered trademark of
TP-LINK TECHNOLOGIES CO., LTD.
Apple and App Store are trademarks of Apple Inc., registered in the U.S. and other countries.
Android, Google Play and the Google Play logo are trademarks of Google Inc.
www.tp-link.com
MADE IN CHINA
Support
If you encounter any issues during installation or configuration,
please visit www.tp-link.com/support for web support and
troubleshooting information.