TP-Link UH700 User manual

For more information, please visit:
www.tp-link.com
www.tp-link.com
♦Keep this device away from water, fire, humidity or hot environments.
♦
♦
♦
Do not heavily drop or impact this device.
♦Do not attempt to disassemble, modify or fix this device by yourself. You run the risk of electric
shock and voiding the limited warranty. If you need service, please contact us.
♦Cut off the power supply before cleaning the device. Do not use liquid cleaning method.
♦
♦
Use the power cord and power adapter provided with your device.
For best performance, the connected devices should not exceed a combined current of 4A.
♦
♦
TP-LINK will not be held responsible for any damage to disk or hard disk data caused by
improper use.
Attention
COPYRIGHT & TRADEMARKS
Specifications are subject to change without notice. TP-LINK is a registered trademark of
TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are registered
trademarks of their respective holders.
No part of the specifications may be reproduced in any form or by any means or used to
make any derivative such as translation, transformation, or adaptation without permission
from TP-LINK TECHNOLOGIES CO., LTD. Copyright © 2016 TP-LINK TECHNOLOGIES CO.,
LTD. All rights reserved.
http://www.tp-link.com
FCC & CE
FCC STATEMENT
CE Mark Warning
This is a class B product. In a domestic environment, this product may cause radio
interference, in which case the user may be required to take adequate measures.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1) This device may not cause harmful interference.
2) This device must accept any interference received, including cause undesired
operation.
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
7106506046 REV2.0.1
User Guide
USB 3.0 Hub
Model No. UH700
Use only power supplies which are provided by manufacturer and in the original
packing of this product.
All manuals and user guides at all-guides.com

Connect the devices as follows. The power LED will light up and the hub
is ready to use.
Charging
Transferring Data
Mobile Hard DiskUSB Flash DiskSmartphone
Usage Tips:
Hardware Connection
Using the Hub
Usage Tips:
Usage Tips:
Smartphone Pad
USB Mouse
This hub provides your computer with 7 additional USB 3.0 ports for
super-speed USB 3.0 data transfer.
The three ports on the right also provide you with a maximum current of
1.5A to quickly charge all kinds of mobile devices such as Android, Apple
and Windows products.
1. The USB 3.0 ports are also compatible with USB 2.0 and USB
1.1 specifications.
2. The USB 3.0 ports transfer data at a rate up to 5Gbps, but the
actual rate is limited by the USB transfer rate of the connected
devices.
3. The performance of 2.4GHz wireless devices (wireless
keyboards, mouses, etc.) may be affected when they are
working too close to USB 3.0 devices.
If your device’s current is less than 1.5A, the charging port can
automatically adjust its current supplied to your device to avoid
damage.
1. The TP-LINK USB 3.0 hub is plug-and-play and requires no driver
for Windows, Mac OS X or Linux systems.
2. The hub is automatically turned on every time you plug the power
adapter into a power outlet.
3. The hub can transfer data even when the power adapter is
unplugged. In this mode, the power button will not work as a
power switch any more.
4. To prevent possible data loss or corruption, avoid unplugging or
plugging the power adapter when transferring data or charging.
All manuals and user guides at all-guides.com