Tracmaster CAMON LS42 User manual

LS42 SCARIFIER
Operating Instructions
Before commissioning the machine, read operating instructions and
observe warning and safety instructions.

CAMON LS42 Lawn Scarifier Tracmaster Ltd
______________________________________________________________________________________________
1 For parts diagrams visit www.tracmaster.co.uk
Manufacturer Details
Tracmaster Ltd
Sovereign Centre
Victoria Road
Burgess Hill
West Sussex
RH15 9LR
UNITED KINGDOM
Tel: [phone]
Fax: [phone]
www.tracmaster.co.uk
[e-mail]
Machine Details
Model: CAMON LS42 Scarifier
Serial Number: ..................................................
Engine Serial No: ..................................................
Date of Purchase: ..................................................
Supplier: ..................................................

Tracmaster Ltd CAMON LS42 Lawn Scarifier
______________________________________________________________________________________________
For parts diagrams visit www.tracmaster.co.uk 2
Table of Contents
1.0 What the Machine is Designed For.......................................................................................... 3
1.1 Applications................................................................................................................. 3
2.0 Specifications........................................................................................................................... 4
3.0 Unpacking and Assembly......................................................................................................... 5
3.1 Major Components Diagram........................................................................................ 5
3.2 Unpacking Instructions................................................................................................ 5
4.0 Safety Instructions – Pre-Operation......................................................................................... 6
4.1 Basic Safety Instructions............................................................................................. 6
4.2 Main Components and Operating Elements................................................................ 6
4.3 Engine and Drive......................................................................................................... 6
4.4 Operating Lever........................................................................................................... 6
4.5 Height Adjustment....................................................................................................... 7
4.6 Collection Bag............................................................................................................. 7
4.7 Rotor Shaft.................................................................................................................. 7
4.8 Commissioning............................................................................................................ 7
4.9 General Safety Instructions......................................................................................... 7
4.10 Engine Specific Safety Instructions ............................................................................. 8
5.0 Safety Instructions Starting and Operating............................................................................... 9
5.1 To Start the Engine...................................................................................................... 9
5.2 To Stop the Engine.................................................................................................... 10
5.3 Safety Equipment...................................................................................................... 10
5.4 Operation................................................................................................................... 10
5.5 Procedure for Unexpected Shut Down.......................................................................11
5.6 How to Clear Unwanted Debris from the Underside of the Machine ..........................11
5.7 Residual Risks of the LS42 Scarifier..........................................................................11
6.0 Maintenance12
6.1 Schedule ................................................................................................................... 12
6.2 Basic Maintenance.................................................................................................... 12
6.3 Advanced Maintenance............................................................................................. 12
6.3.1 Belt............................................................................................................................12
6.3.2 Rotate Rotor.............................................................................................................. 13
6.3.3 Blades....................................................................................................................... 14
6.4 Engine....................................................................................................................... 15
6.4.1 Check Engine Oil Level............................................................................................. 15
6.4.2 Change Engine Oil.................................................................................................... 15
6.4.3 Air Filter..................................................................................................................... 15
6.4.4 Spark Plug................................................................................................................. 16
6.5 Cleaning.................................................................................................................... 16
6.6 Troubleshooting......................................................................................................... 16
6.6.1 Machine .................................................................................................................... 16
6.6.2 Engine....................................................................................................................... 17
6.6.3 Lubricants ................................................................................................................. 17
7.0 Transportation, Storage and Handling.................................................................................... 18
7.1 Transportation ........................................................................................................... 18
7.2 Storage...................................................................................................................... 18
7.3 Handling.................................................................................................................... 18
8.0 Service Record ...................................................................................................................... 19
Warranty Registration..................................................................................................................... 20
EC Declaration of Conformity......................................................................................................... 22

CAMON LS42 Lawn Scarifier Tracmaster Ltd
______________________________________________________________________________________________
3 For parts diagrams visit www.tracmaster.co.uk
1.0 What the Machine is Designed For
1.1 Applications
The CAMON LS42 Lawn Scarifier has been designed by Tracmaster for removing the
dead thatch and moss from lawns and other grassed areas.
The benefit of scarifying a lawn is that it allows air, water and nutrients to reach the
roots of the grass whilst removing unwanted dead and foreign material.
!IMPORTANT – READ CAREFULLY
The blades of the CAMON LS42 Scarifier are designed to pass through the
grass ONLY - they are NOT designed to make contact with solid ground at
any point during operation.
The machine will be damaged should blades continuously come into
contact with solid ground.
DO NOT use the CAMON LS42 Scarifier for cutting grass or slitting the
ground.
Both operations will result in damage to the machine.
Operating the machine on non-grass surfaces such as concrete or tarmac
will cause damage to the LS42 Scarifier.
DO NOT scarify your lawn if there is a likelihood of high temperatures or
drought.
Irrigate the lawn if necessary to ensure that the grass can recover from its
treatment.

Tracmaster Ltd CAMON LS42 Lawn Scarifier
______________________________________________________________________________________________
For parts diagrams visit www.tracmaster.co.uk 4
2.0 Specifications
ENGINE
Engine Manufacturer Honda
Engine Model GX160
Engine Type 4-Stroke overhead valve, single cylinder
Engine Output 4kw
Engine Shaft Size 3/4” Straight
Spark Plug BPR6ES(NGK) / W20EPR-U (DENSO)
Spark Plug Gap 0.70-0.80mm
Engine Ignition Type Recoil
Cold Start System Choke
Fuel Tank Capacity 3.6 litres
Fuel Type Unleaded
Fuel Consumption 313g/kwhr
Air Filter Paper
Rated Engine Speed 3600 rpm
Engine Oil 10w/30
Oil Filling Quantity 0.5 litres
Dry Weight 15kg
MACHINE
Model LS42
Working Width 42cm
No of Blades 30
Direction of Rotor The rotor rotates in the same direction as travel
Clutch Type Centrifugal
Height Adjustment From 0mm above the ground to 20mm
Discharge To the rear into the collection bag
Wheel Types Pneumatic or foam filled
Handlebar Foldable
Noise Level 86db
Vibration Acceleration Value 6.2ms2
Max gradient for operation on slope 20 degrees
Weight 47kg
Dimensions (l x w x h) 80 x 64 x 60cm

CAMON LS42 Lawn Scarifier Tracmaster Ltd
______________________________________________________________________________________________
5 For parts diagrams visit www.tracmaster.co.uk
3.0 Unpacking and Assembly
3.1 Major Components Diagram
1 Top Handlebar
2 Operating Lever
3 Handlebar Locking Knobs
4 Grassbag Lifting Handle
5 Engine
6 Wheels
7 Front Axle
8 Height Adjuster Knob
9 Locking Knob
10 Belt Guard
11 Throttle Cable
3.2 Unpacking Instructions
Open the top of cardboard box.
Cut the box open by using a sharp knife to cut down through the four corners of the box.
Swivel the folded top part of the handle bar until it locates into position extending from the
lower handle bar arms.
Tighten the top handlebar into position using the locking knobs provided.
Push the four wheels onto the axles of the Scarifier and fasten in place using the penny
washer, M8 spring washer and M8 x 16 bolt provided.
Push the machine forward safely and gently out of the box.
Dispose of the cardboard box and other padding material.

Tracmaster Ltd CAMON LS42 Lawn Scarifier
______________________________________________________________________________________________
For parts diagrams visit www.tracmaster.co.uk 6
4.0 Safety Instructions – Pre-Operation
4.1 Basic Safety Instructions
Before starting the machine, read and understand these operating instructions.
4.2 Main Components and Operating Elements
Below is a description of the main components of the LS42 and how they operate.
4.3 Engine and Drive
The Honda GX160 is a four stroke engine that runs on standard unleaded fuel.
The Honda GX160 is fitted with a red on/off lever that is the main operating control for this
engine. Rotating the switch to the ‘I’ position allows the engine to be started. Rotating the
switch to the ‘O’ position will turn off the engine.
The engine is air cooled and therefore it is important that the grille covering the recoil rope is
kept clear from debris.
The engine drive shaft is fitted with a centrifugal clutch that engages at a set engine speed
and drives a fixed drive belt that is also connected to a pulley on the rotor shaft.
The engine air filter cleans the air drawn in by the engine. A clogged air filter will reduce
performance.
The engine is fitted with a fuel on/off lever and a choke lever. Read the engine operating
instructions to understand the operation of these levers.
4.4 Operating Lever
The LS42 Scarifier rotor shaft is operated by lifting the free swinging lever located
underneath the top of the handlebar.
This lever increases the engine speed to a level that will engage the centrifugal clutch fitted
to the engine drive shaft. Once the clutch has been engaged it will transfer the engine
power to the rotor shaft that will rotate at high speeds within the chassis of the Scarifier.

CAMON LS42 Lawn Scarifier Tracmaster Ltd
______________________________________________________________________________________________
7 For parts diagrams visit www.tracmaster.co.uk
4.5 Height Adjustment
The height of the blades of LS42 Scarifier is altered using the two large knobs at the front of
the machine.
The top knob is connected to the centre of the front axle via a threaded rod. Rotating the
knob in each direction will raise or lower the front axle in relation to the main chassis of the
machine and in turn alter the height of the blades with the chassis.
The second knob located below the top knob on the threaded rod is used to fix the position
of the threaded rod and consequently the height of the blades relative to the front axle.
4.6 Collection Bag
The collection bag must be fitted at all times during operation and will collect the thatch and
moss that is removed from a grass area.
Use the central lifting handle when connecting or disconnecting the bag from the machine.
Always stop the engine and wait for the blades to stop rotating by removing or replacing the
collection bag.
To attach the collection bag onto the machine, first lift the safety back flap on the rear of the
machine chassis with one hand. Then whilst holding the bag with your other hand guide the
two small metal rods protruding from either side of the collection bag frame into the two
channels that have been formed to hold the bag.
4.7 Rotor Shaft
The main rotor shaft holds three rods with each rod holding 10 hardened steel blades.
The blades are separated using spacers and springs. Each set of 10 blades on a rod is
offset from the other two rods.
4.8 Commissioning
Prior to operation it is necessary to check the engine oil level and add engine oil level to the
levels indicated in the specification table on page 4.
The engine fuel tank will not contain fuel so will need filling to the recommended level before
use.
4.9 General Safety Instructions
Be aware of all the safety requirements for the machine.
Visually check the machine for operational safety, complete componentry and fixed guarding
prior to each use.

Tracmaster Ltd CAMON LS42 Lawn Scarifier
______________________________________________________________________________________________
For parts diagrams visit www.tracmaster.co.uk 8
Read and be aware of the warning and instruction signs located on the machinery.
Cordon off the work area to prevent access from the general public.
Before starting work clear the area of any objects that may cause damage to the machine.
Do not operate the machine if you are under the influence of alcohol or drugs. This
equipment must only be operated by persons who are medically fit both physically and
mentally.
Only work in good light and visibility.
Wear the correct personal protection equipment as instructed by this manual.
Operator clothing should not be loose and footwear should offer good grip.
Know how to stop the machine in an emergency.
4.10 Engine Specific Safety Instructions
Always ensure the engine is turned off and fuel tap is turned off when transporting the
machinery, cleaning the machinery and making adjustments.
Always start the engine in open air. Starting an engine within a confined space can lead to
the inhalation of toxic substances.
Do not smoke or use a naked flame when refueling.
Do use only unleaded petrol from fuel containers designed for this purpose. Refuel outdoors
only and replace the fuel tank cap securely.
Do not mix oil with the fuel.
Leave one inch of space in the fuel tank during refilling.
Clear up any petrol spillages immediately.
Avoid contact with the engine during operation as it will become hot. Leave the engine to
cool prior to contact.
Never interfere with the control settings of the engine.
NEVER TILT THE MACHINE BACKWARDS WHEN CLEANING.

CAMON LS42 Lawn Scarifier Tracmaster Ltd
______________________________________________________________________________________________
9 For parts diagrams visit www.tracmaster.co.uk
5.0 Safety Instructions Starting and Operating
5.1 To Start the Engine
Using the dipstick provided,
check the engine oil level. Top
up with 10w/30 oil if the dipstick
is clear of oil.
Check the fuel level. Refill as
necessary and as determined by
the fuel tank type – see diagram.
Switch the engine ignition switch
to the ON position.
Turn the fuel tap located on the
engine carburetor to the ON
position. If the engine is cold or
has not been operated recently
set the choke lever on the
carburetor to the ON position.
Pull the engine recoil handle slowly until it engages then pull hard and fast to start the
engine.
After the start, guide the cord back into its position. Do not let it snap back.
Once the engine has started, if the choke lever has been used, return this to its OFF position
after the engine has run for a few seconds.

Tracmaster Ltd CAMON LS42 Lawn Scarifier
______________________________________________________________________________________________
For parts diagrams visit www.tracmaster.co.uk 10
5.2 To Stop the Engine
Release the operating lever.
Switch the engine ON/OFF switch to the ‘O’ off position.
Turn the fuel tap lever to the OFF position.
Ensure the blades have stopped rotating prior to moving the machine.
WARNING: THE EXHAUST COVER MAY BE HOT – DO NOT TOUCH.
5.3 Safety Equipment
The LS42 operator must be wearing:
•Ear Defenders
•Gloves
•Protective Footwear
•Safety Glasses
5.4 Operation
Before scarifying can be carried out the grass must be cut short and be cleared of any
objects such as stones or sticks that would damage the Scarifier or be picked up and thrown
by the rotating blades.
WARNING: SCARIFYING LONG GRASS WILL QUICKLY CAUSE DAMAGE TO
COMPONENTS OF THE MACHINE. WE RECOMMEND GRASS IS CUT PRIOR TO
SCARIFIYING.
Do not operate the Scarifier on wet lawns or in rainy weather.
Set the operating height by screwing the top adjuster knob either up or down and locking the
desired height with the locking handle.
WARNING: THE BLADES MUST NOT BE ALLOWED TO TOUCH THE GROUND ATANY
POINT DURING OPERATION.
If using the collection bag, ensure that it is mounted correctly and is secure.
Lift the operating lever to engage the rotor shaft and walk at a slow steady pace pushing the
machine ahead of you.
To turn the LS42 Scarifer 180 degrees, release the operating lever, put light downwards
pressure on the handlebars and rotate the machine on its rear wheels.
Do not work the Scarifier on slopes of more than 20 degrees and always work across the
slope, not up and down it.

CAMON LS42 Lawn Scarifier Tracmaster Ltd
______________________________________________________________________________________________
11 For parts diagrams visit www.tracmaster.co.uk
Once the collection bag has become full, release the operating lever, turn off the engine and
ensure the rotor shaft has stopped turning. Remove the collection bag and empty. Re-
attach the bag securely and re-start the engine to continue scarifying.
5.5 Procedure for Unexpected Shut Down
Release the operating lever
Turn the engine operating switch located on the engine to the OFF position.
Ensure the rotor shaft and blades have stopped rotating prior to moving the machine.
5.6 How to Clear Unwanted Debris from the Underside of the Machine
Ensure that the engine has been turned off and the rotor shaft has stopped turning.
Turn the engine fuel tap to the off position.
Attach a lifting hoist to the top handlebar and lift the machine so that it tilts forward onto its
front wheels. As the underneath of the chassis becomes exposed it is possible to see and
remove any unwanted debris.
WARNING: ALWAYS TILT THE LS42 SCARIFIER FORWARDS TO AVOID OIL IN THE
ENGINE FLOODING INTOAREAS WHERE IT WILL CAUSE DAMAGE.
5.7 Residual Risks of the LS42 Scarifier
The rotor shaft will continue to rotate for a couple of seconds once the operating lever has
been released. Ensure that the blades have stopped rotating prior to moving or tilting the
machine.
The LS42 Scarifier is designed to be pushed by the operator both during transportation and
operation. It has no brake system and therefore the operator must hold firmly onto the
machine on sloped areas.

Tracmaster Ltd CAMON LS42 Lawn Scarifier
______________________________________________________________________________________________
For parts diagrams visit www.tracmaster.co.uk 12
6.0 Maintenance
6.1 Schedule
Operation Daily Every
Week Every Month
Engine Check engine oil level 10W/30
See separate engine manual X X
Check condition of blades X
Check condition of blade rods X
Check belt condition X
Check operating lever and cable X
Check grassbag condition X
Check rotor shaft bearings X
Lubricate wheel bearings X
Machine
Tighten all nuts and bolts X
6.2 Basic Maintenance
Check that all guards are fitted securely.
Ensure the cable connecting the operating lever to the engine is securely fastened at both
ends and shows no sign of wear.
Check the pressure of pneumatic tyres and ensure that solid tyres do not show any
indentations or significant wear and tear.
Ensure the wheels are held securely and the bolts that hold the wheels onto the axles are in
place.
Check the wheels rotate smoothly and without hindrance.
6.3 Advanced Maintenance
We strongly recommend that anAuthorised Representative is consulted prior to any major
machine maintenance projects.
6.3.1 Belt
Inspection Check:
Check every 25 hours that the drive belt is not frayed or cracked. If it appears frayed
or cracked then it is time to replace the belt.

CAMON LS42 Lawn Scarifier Tracmaster Ltd
______________________________________________________________________________________________
13 For parts diagrams visit www.tracmaster.co.uk
Changing the Belt:
Remove the three capscrews used to attach the belt guard to the chassis and remove
the belt guard.
Lift the tension pulley away from belt and hold.
Pull the belt towards you and allow the tension pulley to fall back into its normal
position but now not resting on the belt.
The drive belt has now become slack.
Grab the right hand side of the belt close to the bottom pulley and pull as if you are
trying to pull the belt off the bottom pulley.
With your other hand slowly and carefully rotate the pulley in an anticlockwise
direction and ease the belt off the pulley.
The belt is now free from the machine.
To fit the new belt, start by locating the new belt in the groove of the centrifugal clutch.
Stretch the new belt tight by pulling it downwards to the bottom pulley.
Locate one side of the belt in position on the bottom pulley.
Slowly rotate the bottom pulley so that the belt is slowly eased into its place sitting in
the groove of the bottom pulley.
Pull the belt towards you and pull the tension pulley past the belt, now release the belt
and the tension pulley.
Re-attach the belt guard using the original cap screw bolts.
6.3.2 Rotate Rotor
To access the underneath of the chassis you must use a lifting hoist to lift the
handlebars of the machine so that it tilts forward over its front axle.
Remove both the belt guard and rotor shaft guard by undoing the fastening nuts and
bolts.
Remove the belt as instructed above in section 6.3.1.
Loosen the pulley grub screw and slide the bottom pulley off the shaft.
WARNING: Do not lose the woodruff key at this stage.
Loosen the grub screws in the bearings.
Remove the fasteners of the bearing carriers. The two chassis protection plates will
become detached from the chassis at this stage.

Tracmaster Ltd CAMON LS42 Lawn Scarifier
______________________________________________________________________________________________
For parts diagrams visit www.tracmaster.co.uk 14
Pull the loose bearings away from the chassis approximately 30mm. A tool for pulling
bearings may be required at this stage should the bearings be difficult to move.
Once the bearings have been pulled away from the chassis the blade rotor will be
able to be removed from the chassis.
Rotate the blade rotor through 180 degrees and reinsert into the chassis.
Fit the bearing carriers into place around the bearing and use the required fasteners
to fix the carriers to the chassis.
Re-fit the bearings into their position either side of the rotor clamps.
Locate the bottom pulley onto the end of the rotor shaft ensuring the woodruff key is
fitted. Once the pulley is situated beneath the centrifugal clutch fix the pulley into
position by tightening the grub screw.
Re-attach the belt and belt guard as described in 6.3.1.
6.3.3 Blades
Inspection Check:
Blades that have been worn so that they have become rounded must be changed for
the LS42 Scarifier to function properly.
Changing the Blades:
Safety glasses and gloves must be worn.
Remove the rotor as described in section 6.3.2.
Remove the one split pin from the end of just one rod.
Slide the rod through the spiders being careful to remove the springs and blades as
the rod is removed from each section.
Once the worn blades have been removed the rod should be checked for wear and if
serviceable can be reinserted and the new blades located.
Reinsert the rod slowly and in each section between spiders pass the rod through the
springs and blade in the correct order.
Continue this until each section has been filled with a blade and springs and the rod is
showing through the last spider.
Renew and spread the split pin to secure the rod.
Repeat this process with the remaining two rods.
WARNING: Take note of the spring and blade layout from the diagram enclosed.
Re-attach rotor to the chassis as described in section 6.4.1.

CAMON LS42 Lawn Scarifier Tracmaster Ltd
______________________________________________________________________________________________
15 For parts diagrams visit www.tracmaster.co.uk
6.4 Engine
6.4.1 Check Engine Oil Level
This is to be checked prior to each use and every 8 hours during operation.
Check only when the engine is off and in a horizontal position.
Clean the oil filler plug and its surrounding parts.
Remove the oil filler plug. Clean the dipstick with a clean cloth and put the oil filler
plug all the way back into the engine. Remove the oil filler plug and check the oil
level.
Re fill the oil if indicator shows more is required. For the Honda GX160 the
recommended oil is SAE 10w/30.
6.4.2 Change Engine Oil
Refer to the engine manufacturer's manual for location of components and more
detailed assistance.
Do not change the oil if the engine is hot.
The first oil change is after 50 hours of work.
Subsequent oil changes should be made after each 100 hours of work.
At extreme temperatures or conditions change the oil after every 50 hours.
Open the drain plug on the engine and the filling plug and drain the oil into a suitable
container or use a suction pump to remove oil through filler neck.
Ensure the waste oil is disposed of properly.
Re-fit the drain plug and tighten.
Fill fresh engine oil through the oil filling opening. Use a funnel or similar device for
ease of filling.
Replace the oil filler plug and tighten.
6.4.3 Air Filter
Inspection Check:
Remove the air cleaner cover and inspect the filter elements.

Tracmaster Ltd CAMON LS42 Lawn Scarifier
______________________________________________________________________________________________
For parts diagrams visit www.tracmaster.co.uk 16
Cleaning:
See diagram below containing information provided by Honda.
6.4.4 Spark Plug
Clean and replace.
6.5 Cleaning
After cleaning, particularly if a pressure washer has been used, ensure any lubrication points
are re-lubricated.
Clean the engine with a cloth only. Avoid spraying the engine with jets of water as this may
leak into the fuel and ignition systems.
6.6 Troubleshooting
6.6.1 Machine
Have all serious malfunctions on the machine and engine repaired by an authorised
Tracmaster or Honda agent.
Problem Possible Cause Remedy
Broken belt Replace belt
Broken spring tensioner Replace spring
No drive to blades
Damaged centrifugal clutch Replace clutch
Blades have become rounded
on the bottom edge Turn blades round or replace blades
Poor collection and
performance Blades are worn out Replace blades

CAMON LS42 Lawn Scarifier Tracmaster Ltd
______________________________________________________________________________________________
17 For parts diagrams visit www.tracmaster.co.uk
6.6.2 Engine
Problem Possible Cause Remedy
Spark plug connector not
connected Connect spark plug connector
Choke lever is not actuated Actuate choke lever
Fuel tank empty Fill fuel tank
Fuel line clogged Clean fuel line
Defective spark plug Clean or replace spark
plug
Engine does not start
Engine has too much fuel Dry and adjust spark
plug and start engine
Low engine oil Refill immediately
Impaired cooling Clean cooling fan grille
Engine overheats
Air filter clogged Clean air filter
6.6.3 Lubricants
Use the specified 10w/30 oil specified by Honda for the engine oil.
To lubricate the roller bearings in the wheels we recommend using bio-lubricating
grease.

Tracmaster Ltd CAMON LS42 Lawn Scarifier
______________________________________________________________________________________________
For parts diagrams visit www.tracmaster.co.uk 18
7.0 Transportation, Storage and Handling
7.1 Transportation
Use ramps where possible to manoeuvre the Scarifier into a transportation vehicle.
The LS42 must be fixed securely using straps and by placing chocks behind the wheels.
Always transport the LS42 horizontally and not at an angle.
Ensure that the fuel control lever on the engine is moved into the OFF position so fuel does
not leak into the carburetor during transportation.
7.2 Storage
Always clean the machine and dry thoroughly prior to storage and ensure all lubrication
points have been re-greased.
For periods of long storage, change the engine oil.
Either drain the fuel completely or fill the fuel tank and add fuel stabilizer.
Do not store the Scarifier in wet rooms, where fertiliser is stored, or in stables as heavy
corrosion may occur.
Always store the machine in a horizontal position.
7.3 Handling
Do not attempt to lift the machine alone. At least two people is the minimum required.
Gloves must be worn when lifting the LS42 Scarifier.
Do not tilt the machine so that fuel can leak into the air filter of the engine.
When performing maintenance on the Scarifier when it is situated on a work bench, ensure
that the machine is firmly held in position at all times.
Do not lift the machine solely by the engine at any point.

CAMON LS42 Lawn Scarifier Tracmaster Ltd
______________________________________________________________________________________________
19 For parts diagrams visit www.tracmaster.co.uk
8.0 Service Record
To ensure your machine is kept in peak condition we recommend that your Scarifier is serviced
regularly.
Contact Tracmaster on 01444 247689 to find out who your local Authorised Agent is.
Company:__________________________
Date:______________________________
Company:__________________________
Date:______________________________
Company:__________________________
Date:______________________________
Company:__________________________
Date:______________________________
Company:__________________________
Date:______________________________
Company:__________________________
Date:______________________________