TRAMEX CMEX5 User manual

CONCRETE
MOISTURE ENCOUNTER
X5
QUICK START GUIDE
www.tramexmeters.com
- CMEX5 -
Release Hold by pressing once.

Instant readings displayed on digital screen.
OPERATION
Press to power ON/OFF.
•
•
•
•
•
•
Press the CMEX5 fully against concrete slab or
screed surface. (Surface should be smooth and
free of coatings/contaminants)
CONCRETE
Shortcut Menu: To choose between scales in
Non-DestructiveTesting (NDT), or Recently Used
Wood scales in Pin-Meter Mode, press ,
scroll and to select and return to main
screen.
Full Menu: Press to access Full Menu,
and to scroll, to select, and to exit
menu to main screen.
Full Menu is used to choose NDTand Pin Scales
(Wood Standard, Wood Species, WME, Drywall),
Pin Temperature, Language andTemperature
Scale (Cº of Fº). For complete instructions, see
the online user guide.

NON DESTRUCTIVE MODE
•
•
•
•
•
•
•
•
The built-in Relative Humidity Sensor provides
Temperature, Relative Humidity, DewPoint and
grains per pound readings.
Automatic power timeout (5 mins) conserves
battery life.
Shortcut Menu: To choose between scales in
Non-DestructiveTesting (NDT), or Recently Used
Wood scales in Pin-Meter Mode, press ,
scroll and to select and return to main
screen.
Full Menu: Press to access Full Menu,
and to scroll, to select, and to exit
menu to main screen.
Full Menu is used to choose NDTand Pin Scales
(Wood Standard, Wood Species, WME, Drywall),
Pin Temperature, Language andTemperature
Scale (Cº of Fº). For complete instructions, see
the online user guide.
Last scale used is memorized on power off and
automatically restored on next power up.
Hold/freeze: Press once, “II” will appear on
the screen. Press again to release hold.
(If powered down while on Hold, will retain infor-
mation until powered up and hold pressed again
to release)
CONCRETE %MC scale: Quantitative %MC
Moisture Content by mass/weight readings for
Concrete slabs and sand/cement screeds using
Gravimetric testing as a baseline.
CM CONCRETE scale: Equivalent reading to
Carbide Method (CM) test for Concrete slabs and
Sand/Cement screeds.
CM ANHYDRITE: Equivalent reading to Carbide
Method (CM) test for Anhydrite, Hemi-hydrate,
Gypsum and Calcium Sulphate Screeds.
GYPSUM REF 0-12: Reference readings repli-
cating measurements using concrete scale on
concrete & sand/cement floors/screeds, for use
on Gypsum floors/screeds.
REFERENCE 0-99 scale: Comparative/qualita-
tive scale to identify areas with moisture; where
direct contact to bare concrete is not possible
due to thin coating or covering; for non-concrete/
screed materials such as ceramic tiles or stone.

EQUILIBRIUM RELATIVE HUMIDITY PROBE MODE
Use Shortcut Menu to select from
Recently Used scales.
Use Full Menu to select Pin Scale
options (Wood Standard, Wood Species,
WME, Drywall, Pin Temperature)







Attach the pin-probe (if purchased) into
Bayonet connection at top of the instrument.
(Line up arrow on front and twist.)
The built-in Relative Humidity Sensor provides
Temperature, Relative Humidity, DewPoint and
grains per pound readings.
Last scale used is memorized on power off and
automatically restored on next power up.
Hold/freeze: Press once, “II” will appear on
the screen. Press again to release hold.
(If powered down while on Hold, will retain infor-
mation until powered up and hold pressed again
to release)
CONCRETE %MC scale: Quantitative %MC
Moisture Content by mass/weight readings for
Concrete slabs and sand/cement screeds using
Gravimetric testing as a baseline.
CM CONCRETE scale: Equivalent reading to
Carbide Method (CM) test for Concrete slabs and
Sand/Cement screeds.
CM ANHYDRITE: Equivalent reading to Carbide
Method (CM) test for Anhydrite, Hemi-hydrate,
Gypsum and Calcium Sulphate Screeds.
GYPSUM REF 0-12: Reference readings repli-
cating measurements using concrete scale on
concrete & sand/cement floors/screeds, for use
on Gypsum floors/screeds.
REFERENCE 0-99 scale: Comparative/qualita-
tive scale to identify areas with moisture; where
direct contact to bare concrete is not possible
due to thin coating or covering; for non-concrete/
screed materials such as ceramic tiles or stone.
PIN-PROBE WOOD/WME MODE
When pins are inserted into wood, measure-
ments of 5% to approx. 30% are displayed.
WME scale is a Wood Moisture Equivalent
scale for comparative pin readings in many
building materials.
DRYWALL scale is a comparative scale for
use in drywall.
Attach the RH cable and probe (if purchased)
into the Bayonet connection at the top of the
instrument. (Line up arrow on front and twist.)

CALIBRATION & WARRANTY
•
•
•
•
•
•
•
Obtain Warranty online:
tramexmeters.com/register
For information on how to perform Equilib-
rium Relative Humidity (ERH) testing of
concrete and other floor screeds see the
online user guide.
Check the calibration of Tramex Hygro-i2 RH
probes (as per ASTM & International Stan-
dards) with Calibration Check Salts.
(Product Code: SAL75)
The CMEX5 automatically switches into
Hygrometer mode, displaying readings of
RH%, Temperature, Dew Point & Humidity
Ratio.
Annual calibrations are recommended.
Calibration Check Plates can be purchased
for more regular checks.
(Product code: CALCRH)
The pin probe calibration is automatically
checked on power-up. Additional 3-Value
Calibration Check Plugs available.
(Product code: PTMCALSET-B)
TROUBLESHOOTING
BLUETOOTH
Press to switch Bluetooth ON/OFF. Read-
ings will be sent to the Tramex App on your
mobile device.
EQUILIBRIUM RELATIVE HUMIDITY PROBE MODE

QUICK START GUIDE
•
•
•
•
•
•
•When replacing the batteries always
ensure to use Alkaline batteries.
TROUBLESHOOTING
“II” On home screen & readings frozen.
Release Hold by pressing once.
Meter is on Hold.
Low Battery Indicator.
Probe icon on screen crossed out when RH
probe cable is connected.
Check Hygro-i2 probe is attached and
connected properly.
www.tramexmeters.com
EQUILIBRIUM RELATIVE HUMIDITY PROBE MODE
USER GUIDE ONLINE
Please use the following link or QR code to
access the complete User Guide online:
http://l.ead.me/bb3OyK
Free App Available for Mobile and Tablet:
LI-CMEX5QSG