Trane BAYKSKT257 Assembly instructions

Installer's
Guide
Start Control Kit
BAYKSKT257, 258, 259, 260, 263, 265 & 266
ALL phases of this installation must comply with NATIONAL, STATE AND LOCAL CODES
IMPORTANT — This Document is customer property and is to remain with this unit. Please return to service information
pack upon completion of work.
18-HE12D7-5A-EN
INSTALLATION:
Mounting Start Control Kit Components
1. Be certain power to unit is DISCONNECTED.
2. Remove cover panel on control box compartment.
3. Open Start Control Kit and remove kit assembly.
4. With the screws provided, secure Start Control kit
assembly in control compartment as illustrated. (See
Figure 1)
Wiring Start Control Kit Components
5. Connect the color coded start control wires with quick
connect 1/4" ag terminals to the contactor and capaci-
tor, as illustrated. (See Figure 2)
6. To replace control compartment panel reverse proce-
dure used to remove these items.
7. Re-connect power, which was disconnected in step 1.
①
WARNING:
HAZARDOUS VOLTAGE - DISCONNECT POWER BEFORE SERVICING

INSTALLER'S GUIDE
②
About Trane and American Standard Heating and Air Conditioning
Trane and American Standard create comfortable, energy efficient indoor environments for residential applications.
For more information, please visit www.trane.com or www.americanstandardair.com
The manufacturer has a policy of continuous data improvement and it reserves the right to change design and specifications without notice.We are
committed to using environmentally conscious print practices.
© 2020
18-HE12D7-5A-EN 08 Jul 2020
Supersedes 18-HE12D7-5 (December 2013)