TRENDnet TV-IP400W - Wireless Advanced Pan User manual

1
TABLE OF CONTENTS
ABOUT THIS GUIDE...........................................................3
1. INTRODUCTION..............................................................4
FEATURES AND BENEFITS .........................................................5
UNPACKING THE PACKAGE .......................................................7
SYSTEM REQUIREMENT.............................................................8
PHYSICAL DESCRIPTION............................................................9
2. HARDWARE INSTALLATION.................................12
A TTACHING THE M ETAL C LIP ..................................................12
CONNECTING THE ETHERNET CABLE ......................................13
ATTACHING THE POWER SUPPLY............................................13
3. SECURITY.........................................................................14
4. APPLICATION OF THE CAMERA.......................15
APPLICATIONS.........................................................................16
APPLICATIONDIAGRAMSOFTHECAMERA .....................................17
5. USING THE CAMERA .................................................20

2
WEB CONFIGURATION UTILITY...............................................20
SYSTEM ADMINISTRATION......................................................22
VIEWING VIDEO ......................................................................51
6. IPVIEW SE........................................................................55
INSTALLATION.........................................................................55
GETTING STARTED ..................................................................60
HOW TO ADD A CAMERA ........................................................62
HOW TO CHANGE CAMERA .....................................................67
CONNECT/DISCONNECT THE IMAGE........................................68
HOW TO DELETE A CAMERA ...................................................71
EXTRA INFORMATION..............................................................72
HOW TO ADJUST THE PROPERTY SETTING..............................73
ADJUST THE RECORDING SETTING..........................................79
7. APPENDIX.........................................................................80
A. FREQUENTLY ASKED QUESTIONS.......................................80
B. PING YOUR IP ADDRESS....................................................83
C. TROUBLE SHOOTING...........................................................84
D. TIME ZONE TABLE..............................................................88
E. XPLUG CONTROL INSTALLATION........................................90
F. ADJUST INTERNET CAMERA FOCUS....................................94
G. SPECIFICATION....................................................................95
H. GLOSSARY OF TERMS .........................................................97

3
ABOUT THIS GUIDE
This manual provides instructions and illustrations on how to use
your Wireless Wireless Pan/Tilt Internet Camera, includes:
zChapter 1, Introduction, provides the general information
on the camera.
zChapter 2, Hardware Installation, describes the hardware
installation procedure for the camera.
zChapter 3, Security, explains the security feature of the
camera.
zChapter 4, Application of the Camera, provides the
illustrations of the camera’s applications.
zChapter 5, Using the Camera, guides you through the
configuration using the web browser.
zChapter 6, IPView SE, helps you to install and use the
software.
zChapter 7, Appendix.
Please note that the illustrations or setting values in this manual
are FOR YOUR REFERENCE ONLY. The actual settings and
values depend on your system and network. If you are not sure
about the respective information, please ask your network
administrator or MIS staff for help.

4
1
INTRODUCTION
Thank you for purchasing the Wireless Pan/Tilt Internet Camera,
a standalone system that can be connected directly to an Ethernet
or Fast Ethernet, and also supported by the wireless transmission
based on the IEEE 802.11g standard. Compared to the
conventional PC camera, the Wireless Pan/Tilt Internet Camera
features a built-in CPU and web-based solutions that can provide
a cost-effective solution to transmit the real-time high-quality
video images for monitoring. The camera can be managed
remotely, so that you can use a web browser to access and control
it from any notebook/desktop PC over the Intranet or Internet.
The simple installation procedures and web-based interface allow
you to integrate it into your network easily. With comprehensive
applications supported, the Internet camera is your best solution
for remote monitor, high quality, and high performance video
images.

5
Features and Benefits
Simple To Use
The Wireless Pan/Tilt Internet Camera is a standalone system
with built-in CPU, no special hardware (such as a PC frame
capture card) or software required. The camera supports DirectX
9.0; therefore, the only requirement you need is the web browser
software such as Internet Explorer 5.0 or above. Once you have a
valid IP Address, just connect it and you can view the picture
from your camera. In addition, the camera’s pan/tilt function
allows you to adjust the camera for optimal viewing angle. You
can tilt the camera right or left (up to 170/170 degrees), forward
or backward (up to 45/90 degrees) using the Web Configuration
Utility.
Support Variety of Platforms
The camera supports TCP/IP networking, SMTP e-mail, HTTP
and other Internet related protocols. It can be utilized in a mixed
operating system environment, including Windows 98SE/ME/
2000/XP and Windows NT 4.0. It can be integrated easily into
other www/Intranet applications.
Web Configuration
Applying a standard web browser, the administrator can configure
and manage the camera directly from its own web page via the
Intranet or Internet. Up to 64 users name and password are
permitted with privilege setting controlled by the administrator.

6
Remote Utility
The powerful IPView SE application assigns the administrator
with a pre-defined user ID and password, allowing the
administrator to modify the camera settings from the remote site
via Intranet or Internet. When new firmware is available, you can
also upgrade remotely over the network for added convenience.
Users are also allowed to monitor the image, and take snapshots.
Broad Range of Applications
With today’s high-speed Internet services, the camera can provide
the ideal solution for live video images over the Intranet and
Internet for remote monitoring. The camera allows remote access
from a web browser for live image viewing, and allows the
administrator to manage and control the camera anywhere and
anytime in the world. Apply the camera to monitor various
objects and places such as homes, offices, banks, hospitals, child-
care centers, amusement parks and other varieties of industrial
and public monitoring. The camera can also be used for intruder
detection; in addition, it can capture still images for archiving and
many more applications.

7
Unpacking the Package
Unpack the package and check all the items carefully. In addition
to this User’s Guide, be certain that you have:
One Wireless Pan/Tilt Internet Camera (with antenna)
One External Power Adapter (5V DC, 2A)
One RJ-45 Ethernet Cable
One Metal Clip
One Quick Installation Guide
One Installation CD-ROM
If any item contained is damaged or missing, please contact your
local dealer immediately. Also, keep the box and packing
materials in case you need to ship the unit in the future.

8
System Requirement
Networking
Local Area Network:
10Base-T Ethernet or 100Base-TX Fast Ethernet
Wireless Local Area Network (wireless model):
IEEE 802.11g Wireless LAN
Accessing the Camera
For Web Browser Users
Operating System: Microsoft® Windows® 98SE/ME/
2000/XP
CPU: Intel Pentium II, 266 MHz or above
Memory Size: 32MB (64MB recommended)
Resolution: 800x600 or above
Microsoft® Internet Explorer 5.0 or above
For IPView SE Application Users
Operating System: Microsoft® Windows® 98SE/ME/
2000/XP.
CPU: Intel Pentium III, 450 MHz or above
Memory Size: 128 MB (256 MB recommended)
Resolution: 800x600 or above

9
Physical Description
This section describes the externally components’ features of
your camera.
Front Panel
There are two LED indicators on the front panel of the camera:
Power LED and Link LED.
1. Power LED
The Power LED is positioned on the right side of the two LEDs.
A steady BLUE light confirms that the camera is powered on.
2. Link LED
The Link LED is positioned on the left side of the two LEDs. A
steady ORANGE light confirms that the camera has good
connection to LAN connectivity.
Dependent on the data traffic, the LED will begin to flash to
indicate that the camera is receiving/sending data from/to the
network.