TRENDnet TEG-3102WS User manual

TRENDnet User’s Guide
Cover Page

© Copyright 2022 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
Table of Contents
a
Thank you for purchasing your new TRENDnet PoE Web Smart Switch!
Please note: The scope of this user's guide encompasses multiple
products with varying features. Images, artwork, and other specificities
including port count, interfaces etc. may not be identical to the model
you purchased. Please consult the specific model specifications for your
unit for a full list of supported features.
Table of Contents
PoE Web Smart Switch Series Product Overview .............................1
TEG-3102WS Overview.................................................................................................. 1
Package Contents............................................................................................................... 1
TPE-3102WS Hardware Features....................................................................................... 1
TPE-3102WS Overview .................................................................................................. 3
Package Contents............................................................................................................... 3
TPE-3102WS Hardware Features....................................................................................... 3
TPE-3524S / TPE-3524SF Overview ............................................................................... 5
Package Contents............................................................................................................... 5
TPE-3524S / TPE-3524SF Hardware Features .................................................................... 6
TEG-7124WS Overview.................................................................................................. 8
Package Contents............................................................................................................... 8
TEG-7124WS Hardware Features ...................................................................................... 8
TEG-3524S Overview ................................................................................................... 10
Package Contents............................................................................................................. 10
TEG-3524S Hardware Features ........................................................................................ 10
Switch Installation ........................................................................12
Desktop Hardware Installation.................................................................................... 12
Rack Mount Hardware Installation.............................................................................. 12
Setup Wizard ............................................................................................................... 13
Basic IP Configuration.................................................................................................. 16
Connect additional devices to your switch.................................................................. 18
Access your switch management page........................................................................ 19
Dashboard ................................................................................................................... 19
View your switch status information ............................................................................... 19
Real-time Statistics ...................................................................................................... 21
View your switch status information ............................................................................... 21

© Copyright 2022 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
Table of Contents
b
System..........................................................................................21
System Settings............................................................................................................ 21
Set your system information............................................................................................ 21
L3 Feature.................................................................................................................... 23
IPv4 Interface ................................................................................................................... 23
IPv4 ARP Aging Time ........................................................................................................ 24
IPv4 Static ARP ................................................................................................................. 24
System Time..................................................................................................................... 25
SNMP............................................................................................26
Global Settings ................................................................................................................. 26
User List............................................................................................................................ 26
Community List ................................................................................................................ 27
Group List......................................................................................................................... 27
Access List ........................................................................................................................ 27
View List ........................................................................................................................... 28
RMON .......................................................................................................................... 28
Statistics ........................................................................................................................... 28
Event List.......................................................................................................................... 29
Event Log Table ................................................................................................................ 30
Alarm List ......................................................................................................................... 30
History.............................................................................................................................. 31
History Log Table.............................................................................................................. 32
MAC Address Table...................................................................................................... 32
Static MAC Address.......................................................................................................... 32
Dynamic MAC Address..................................................................................................... 33
MAC Aging Time............................................................................................................... 33
SFP Module Information.............................................................................................. 33
Module & DDM ................................................................................................................ 33
IEEE 802.3az EEE .......................................................................................................... 34
Enable IEEE 802.3az Power Saving Mode ........................................................................ 34
Network........................................................................................35
Physical Interface......................................................................................................... 35
Configure Physical Interfaces........................................................................................... 35
Port Isolation.................................................................................................................... 36
Mirroring.......................................................................................................................... 36
Jumbo Frames.................................................................................................................. 37
VLAN Settings .............................................................................................................. 38
802.1Q VLAN.................................................................................................................... 38
PVID & Ingress Filter ........................................................................................................ 39
GVRP............................................................................................................................ 40
Protocol............................................................................................................................ 40
Port Settings..................................................................................................................... 40
Spanning Tree.............................................................................................................. 41
Protocol............................................................................................................................ 41
Root Bridge Information .................................................................................................. 42
RSTP Port Settings............................................................................................................ 42
CIST Port Settings............................................................................................................. 43
MST .................................................................................................................................. 44
MST Port Settings............................................................................................................. 45
Trunk............................................................................................................................ 46
Settings ............................................................................................................................ 46
LACP ................................................................................................................................. 46
LACP Timeout................................................................................................................... 47
IGMP Snooping............................................................................................................ 47
Global Settings ................................................................................................................. 47
Fast Leave ........................................................................................................................ 47
VLAN Settings................................................................................................................... 48
Querier Settings ............................................................................................................... 48
Router Settings ................................................................................................................ 49
MLD Snooping ............................................................................................................. 49
Global Settings ................................................................................................................. 49
Fast Leave ........................................................................................................................ 49
VLAN Settings................................................................................................................... 50
Querier Settings ............................................................................................................... 50

© Copyright 2022 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
Table of Contents
c
Router Settings................................................................................................................. 50
Loopback Detection..................................................................................................... 51
Global Settings ................................................................................................................. 51
Voice VLAN .................................................................................................................. 51
Global Settings ................................................................................................................. 52
OUI Settings ..................................................................................................................... 53
Port Settings..................................................................................................................... 53
LLDP ............................................................................................................................. 54
Enable and configure LLDP............................................................................................... 54
Settings............................................................................................................................. 54
Multicast Filtering........................................................................................................ 55
Enable Multicast Filtering ................................................................................................ 55
Administration............................................................................................................. 55
Changing login credentials ............................................................................................... 55
Logs.............................................................................................................................. 56
Settings............................................................................................................................. 56
Remote Logging ............................................................................................................... 56
Log Table .......................................................................................................................... 56
QoS (Quality of Service) ................................................................56
Global Settings............................................................................................................. 57
Set QoS settings ............................................................................................................... 57
CoS............................................................................................................................... 57
Set CoS priority settings ................................................................................................... 57
DSCP Mapping ............................................................................................................. 58
Set DSCP (Differentiated Services Code Point) Class Mapping settings........................... 58
Port CoS ....................................................................................................................... 58
Set Port Priority................................................................................................................ 58
Bandwidth Control....................................................................................................... 59
Bandwidth Control........................................................................................................... 59
Storm Control................................................................................................................... 59
PoE (Power over Ethernet)............................................................60
Power over Ethernet ................................................................................................... 60
Configure PoE Budget ...................................................................................................... 61
Configure PoE Port Settings ............................................................................................. 61
Flick Reboot ..................................................................................................................... 62
Time Range.................................................................................................................. 62
Configure PoE Time Range............................................................................................... 62
PD Lifeguard ................................................................................................................ 63
Configure PD Alive Check................................................................................................. 63
Advanced Configuration .................................................................................................. 63
Security ........................................................................................64
802.1X Authentication................................................................................................. 64
Set 802.1X ........................................................................................................................ 64
Timeout............................................................................................................................ 64
CLI Timeout ...................................................................................................................... 64
Port Security..................................................................................................................... 65
Access Control: Creating MAC ACL .................................................................................. 65
Access Control: Configuring MAC ACL ............................................................................. 65
Access Control: Creating IPv4 ACL ................................................................................... 66
Access Control: Configuring IPv4 ACL .............................................................................. 66
Access Control: Creating IPv6 ACL ................................................................................... 67
Access Control: Configuring IPv6 ACL .............................................................................. 67
Port Binding ..................................................................................................................... 68
Dial-in User .................................................................................................................. 68
Create Dial-In Users (Local Authentication Method)....................................................... 68
RADIUS......................................................................................................................... 69
Add Radius Servers (RADIUS Authentication Method).................................................... 69
TACACS+ ...................................................................................................................... 69
Add TACACS+ Servers (TACACS+ Authentication Method).............................................. 69

© Copyright 2022 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
Table of Contents
d
DHCP Snooping............................................................................................................ 70
Settings............................................................................................................................. 70
VLAN................................................................................................................................. 71
Trusted Port Interfaces .................................................................................................... 71
Denial of Service .......................................................................................................... 72
Denial of Service (DoS)..................................................................................................... 72
Tools.............................................................................................73
Firmware Upgrade....................................................................................................... 73
Upgrade your switch’s firmware...................................................................................... 73
Firmware Upgrade via HTTP Settings............................................................................... 73
Firmware Upgrade via TFTP Settings ............................................................................... 73
Dual Image ....................................................................................................................... 74
Config Backup Restore................................................................................................. 75
Config Backup/Restore .................................................................................................... 75
Backup/Restore via HTTP Settings ................................................................................... 75
Backup/Restore via TFTP Settings.................................................................................... 75
Diagnostics................................................................................................................... 76
Cable Diagnostics Test ..................................................................................................... 76
Ping Test ...................................................................................................................... 77
Network Connectivity Test (Ping Tool)............................................................................. 77
IPv6 Ping Test............................................................................................................... 78
Network Connectivity Test (Ping Tool) ............................................................................ 78
Trace Route ................................................................................................................. 78
Reboot ......................................................................................................................... 78
Reboot/Reset to factory defaults .................................................................................... 78
Hardware Features and Specifications...........................................80
Web Smart Switch Series Software Specifications..........................82
Quick Installation Guide Troubleshooting......................................84

© Copyright 2022 TRENDnet. All Rights Reserved.
1
TRENDnet User’s Guide
Multi-Gig Web Smart Switch Series
PoE Web Smart Switch Series Product Overview
TEG-3102WS Overview
TEG-3102WS
Package Contents
In addition to your switch, the package includes:
•Quick Installation Guide
•Power adapter (12V DC, 1.5A)
If any package contents are missing or damaged, please contact the retail store, online
retailer, or reseller/distributor from which the product was purchased.
TPE-3102WS Hardware Features
Front View
Rear View
•Power and Fault LED –LED indicators for power and fault.
•Reset Button –Press and hold the button 1~3 seconds and release to
reboot the device. Pressing the button more than 5 seconds will reset
the switch to factory defaults. The ports LEDs will turn off to indicate
that the reset was initiated.
•Ethernet Ports (1-8) –Connect network devices at 2.5Gbps / 1Gbps /
100Mbps speed.
•SFP Slots (9-10) –Supports optional 10Gbps or 1Gbps mini-GBIC SFP
modules for uplink or downlink connections.
•Ground Point –Switch can be grounded from this point
•DC-In

© Copyright 2022 TRENDnet. All Rights Reserved.
2
TRENDnet User’s Guide
Multi-Gig Web Smart Switch Series
Diagnostic LEDs
•Power LED
On
:
When the Power LED is on, the device is receiving
power.
Off
:
When the Power LED is off, the power adapter is
not connected or the device is not receiving power.
Blinking
:
When the Power LED is blinking, the switch is
receiving power and is botting up
•Fault LED
Amber
On
:
When the Fault LED is on, there is an error with the
switch.
Off
:
When the Fault LED is off, there is no error with the
switch.
•Ethernet Port LEDs (1-8)
Green
on
:
When the Green LED is on, the respective port is
connected to a 2.5Gbps Ethernet network.
Amber
on
:
When the Green LED lights on, the respective port
is connected to a 100/1000Mbps Ethernet network.
Green
Blinking
:
When the LED is blinking green, the port is
transmitting or receiving data on the network at
2.5Gbps speed.
Amber
Blinking
:
When the LED is blinking amber, the port is
transmitting or receiving data on the network at
100/1000Mbps speed.
Off
When the LED is off, the respective port is
disconnected.
•SFP Slots (9-10)
Link/Activity
Green on
:
When the SFP LED is on, the link established
using the SFP module is operating at 10Gbps
speed.
Green
blinking
:
When the SFP LED is blinking, the port is
transmitting or receiving data on through the
10Gbps link established.
Amber on
:
When the SFP LED is on, the link established
using the SFP module is operating at
1000Mbps speed.
Amber
blinking
:
When the SFP LED is blinking, the port is
transmitting or receiving data on through the
1000Mbps link established.
Off
:
No link established.

© Copyright 2022 TRENDnet. All Rights Reserved.
3
TRENDnet User’s Guide
Multi-Gig Web Smart Switch Series
TPE-3102WS Overview
TPE-3102WS
Package Contents
In addition to your switch, the package includes:
•Quick Installation Guide
•Power Cord (1.8m / 6 ft.)
•Rack mount kit
If any package contents are missing or damaged, please contact the retail store, online
retailer, or reseller/distributor from which the product was purchased.
TPE-3102WS Hardware Features
Front View
Rear View
•Power & LED indicators –Displays switch activities
•LED Mode –Switches the LED indicators between PoE mode and
Link/Activity mode.
•Reset Button –Press and hold the button 1~3 seconds and release to
reboot the device. Pressing the button more than 5 seconds will reset
the switch to factory defaults. The ports LEDs will turn off to indicate
that the reset was initiated.
•Mode Button –Press the mode button to change LED indicators to
display Link/Activity Mode, or PoE Mode.
•Ethernet Ports (1-8) –Connect either network PoE+ or non-PoE devices
at 2.5Gbps / 1Gbps / 100Mbps speeds.
•SFP Slots (9-10) –Supports optional 10Gbps or 1Gbps mini-GBIC SFP
modules for uplink or downlink connections.

© Copyright 2022 TRENDnet. All Rights Reserved.
4
TRENDnet User’s Guide
Multi-Gig Web Smart Switch Series
Diagnostic LEDs
•Power LED
On
:
When the Power LED is on, the device is receiving
power.
Off
:
When the Power LED is off, the power adapter is
not connected or the device is not receiving power.
Blinking
:
When the Power LED is blinking, the switch is
receiving power and is botting up
•Fault LED
Amber
On
:
When the Fault LED is on, there is an error with the
switch.
Off
:
When the Fault LED is off, there is no error with the
switch.
•PoE MAX (Power over Ethernet Max.)
Amber
On
:
When reaching near the max PoE power budget
provided 240W or above, the LED will turn on and
the system will not provide power additional PD
(PoE client devices) after max PoE budget is
reached.
Off
:
When the PoE power provided is below the 240W
PoE power budget.
•Gigabit Ethernet PoE+ Port LEDs (1-8)
Green
on
:
When the Green LED is on, the respective port is
connected to a 2.5Gbps Ethernet network.
Amber
on
:
When the Green LED lights on, the respective port
is connected to a 100/1000Mbps Ethernet network.
Green
Blinking
:
When the LED is blinking green, the port is
transmitting or receiving data on the network at
2.5Gbps speed.
Amber
Blinking
:
When the LED is blinking amber, the port is
transmitting or receiving data on the network at
100/1000Mbps speed.
Off
When the LED is off, the respective port is
disconnected.
•Gigabit Ethernet Port PoE+ LEDs (1-8)
Green
on
:
When the Green LED is on, the connected device is
receiving power.
Amber
on
:
When the Amber LED lights on, the connected PoE
device is not receiving power. The cause is either
insufficient power budget, or due to
Class/PowerLimit restrictions in the PoE
configurations.
Off
:
When the LED is off, the respective port is either not
connected to a PoE device or is disconnected.
•SFP Slots (9-10)
Green on
:
When the SFP LED is on, the link established
using the SFP module is operating at 10Gbps
speed.

© Copyright 2022 TRENDnet. All Rights Reserved.
5
TRENDnet User’s Guide
Multi-Gig Web Smart Switch Series
Green
blinking
:
When the SFP LED is blinking, the port is
transmitting or receiving data on through the
10Gbps link established.
Amber on
When the SFP LED is on, the link established
using the SFP module is operating at
1000Mbps speed.
Amber
blinking
When the SFP LED is blinking, the port is
transmitting or receiving data on through the
1000Mbps link established.
Off
No link established.
TPE-3524S / TPE-3524SF Overview
TPE-3524S / TPE-3524SF
Package Contents
In addition to your switch, the package includes:
•Quick Installation Guide
•Power Cord (1.8m / 6 ft.)
•Rack mount kit
If any package contents are missing or damaged, please contact the retail store, online
retailer, or reseller/distributor from which the product was purchased.

© Copyright 2022 TRENDnet. All Rights Reserved.
6
TRENDnet User’s Guide
Multi-Gig Web Smart Switch Series
TPE-3524S / TPE-3524SF Hardware Features
Front View
Rear View
•Power & LED indicators –Displays switch activities
•LED Mode –Switches the LED indicators between PoE mode and
Link/Activity mode.
•Reset Button –Press and hold the button 1~3 seconds and release to
reboot the device. Pressing the button more than 5 seconds will reset
the switch to factory defaults. The ports LEDs will turn off to indicate
that the reset was initiated.
•Mode Button –Press the mode button to change LED indicators to
display Link/Activity Mode, or PoE Mode.
•Ethernet Ports (1-48) –Connect either network PoE+ or non-PoE devices
at 2.5Gbps / 1Gbps / 100Mbps speeds.
•SFP Slots (49-52) –Supports optional 10Gbps or 1Gbps mini-GBIC SFP
modules for uplink or downlink connections.
Diagnostic LEDs
•Power LED
On
When the Power LED is on, the device is receiving
power.
Off
When the Power LED is off, the power adapter is
not connected or the device is not receiving power.
Blinking
When the Power LED is blinking, the switch is
receiving power and is botting up
•Fault LED
Amber
On
When the Fault LED is on, there is an error with the
switch.
Off
When the Fault LED is off, there is no error with the
switch.
•PoE MAX (Power over Ethernet Max.)
Amber
On
When reaching near the max PoE power budget
provided 240W or above, the LED will turn on and
the system will not provide power additional PD
(PoE client devices) after max PoE budget is
reached.
Off
When the PoE power provided is below the 240W
PoE power budget.
•LAN Mode: Gigabit Ethernet PoE+ Port LEDs (1-48)

© Copyright 2022 TRENDnet. All Rights Reserved.
7
TRENDnet User’s Guide
Multi-Gig Web Smart Switch Series
Green on
Solid
When the Green LED is on, the respective port is
connected on a Gigabit Speed
Off
10/100Mbps is connected or there is no link
established
Green
Blinking
Link/Act
When the LED is blinking green, the port is
transmitting or receiving data on the network at
Gigabit speed.
Green
Link/Act Solid
When the LED is solid green, there is a link
established
Off
When the LED is off, the respective port is
disconnected.
•PoE Mode: Gigabit Ethernet Port PoE+ LEDs (1-48)
Green on
When the Green LED is on, the connected device
is receiving power.
Green Solid
When the LED is solid Green, there is a power
error
Off
No Power device is connected
•SFP Slots (49-52)
Green
When the SFP LED is on, the link established using
the SFP module is operating at 10Gbps speed.
Amber
When the SFP LED is on, the link established using
the SFP module is operating at 1000Mbps speed.
Off
When the SFP LED is on, the link established using
the SFP module is operating at 10/100Mbps
speed or there is no link
Green
blinking
When the SFP LED is blinking, the port is
transmitting or receiving data
Green Solid
When the SFP LED is solid, there is a link
connected
Off
No link established.

© Copyright 2022 TRENDnet. All Rights Reserved.
8
TRENDnet User’s Guide
Multi-Gig Web Smart Switch Series
TEG-7124WS Overview
Package Contents
In addition to your switch, the package includes:
•Quick Installation Guide
•Power cord (1.8 m / 6 ft.)
•Rack mount kit
If any package contents are missing or damaged, please contact the retail store, online
retailer, or reseller/distributor from which the product was purchased.
TEG-7124WS Hardware Features
Front View
Rear View
•Power LED Indicator –LED indicators for power and fault
•Reset Button –Press and hold the button 1~3 seconds and release to
reboot the device. Pressing the button more than 5 seconds will reset
the switch to factory defaults. The ports LEDs will turn off to indicate
that the reset was initiated.
•Ethernet Ports (1-8) –Connect network devices at 10Gbps / 5Gbps
2.5Gbps / 1Gbps / 100Mbps speeds.
•SFP Slots (9-12) –Supports optional 10Gbps or 1Gbps mini-GBIC SFP
modules for uplink or downlink connections.

© Copyright 2022 TRENDnet. All Rights Reserved.
9
TRENDnet User’s Guide
Multi-Gig Web Smart Switch Series
Diagnostic LEDs
•Power LED
On
:
When the Power LED is on, the device is receiving
power.
Off
:
When the Power LED is off, the power adapter is
not connected or the device is not receiving power.
Blinking
:
When the Power LED is blinking, the switch is
receiving power and is botting up
•Fault LED
Amber
On
:
When the Fault LED is on, there is an error with the
switch.
Off
:
When the Fault LED is off, there is no error with the
switch.
•Ethernet Port LEDs (1-8)
Green
on
:
When the Green LED is on, the respective port is
connected to a 2.5/5/10Gbps Ethernet network.
Amber
on
:
When the Green LED lights on, the respective port
is connected to a 100/1000Mbps Ethernet network.
Green
Blinking
:
When the LED is blinking green, the port is
transmitting or receiving data on the network at
2.5/5/10Gbps speed.
Amber
Blinking
:
When the LED is blinking amber, the port is
transmitting or receiving data on the network at
100/1000Mbps speed.
Off
When the LED is off, the respective port is
disconnected.
•SFP Slots (9-10)
Green on
:
When the SFP LED is on, the link established
using the SFP module is operating at 10Gbps
speed.
Green
blinking
:
When the SFP LED is blinking, the port is
transmitting or receiving data on through the
10Gbps link established.
Amber on
:
When the SFP LED is on, the link established
using the SFP module is operating at
1000Mbps speed.
Amber
blinking
:
When the SFP LED is blinking, the port is
transmitting or receiving data on through the
1000Mbps link established.
Off
:
No link established.

© Copyright 2022 TRENDnet. All Rights Reserved.
10
TRENDnet User’s Guide
Multi-Gig Web Smart Switch Series
TEG-3524S Overview
Package Contents
In addition to your switch, the package includes:
•Quick Installation Guide
•Power cord (1.8 m / 6 ft.)
•Rack mount kit
If any package contents are missing or damaged, please contact the retail store, online
retailer, or reseller/distributor from which the product was purchased.
TEG-3524S Hardware Features
Front View
Rear View
•Power LED Indicator –LED indicators for power and fault
•Reset Button –Press and hold the button 1~3 seconds and release to
reboot the device. Pressing the button more than 5 seconds will reset
the switch to factory defaults. The ports LEDs will turn off to indicate
that the reset was initiated.
•Ethernet Ports (1-48) –Connect network devices at 10Gbps / 5Gbps
2.5Gbps / 1Gbps / 100Mbps speeds.
•SFP Slots (49-52) –Supports optional 10Gbps or 1Gbps mini-GBIC SFP
modules for uplink or downlink connections.

© Copyright 2022 TRENDnet. All Rights Reserved.
11
TRENDnet User’s Guide
Multi-Gig Web Smart Switch Series
Diagnostic LEDs
•Power LED
On
When the Power LED is on, the device is receiving
power.
Off
When the Power LED is off, the power adapter is
not connected or the device is not receiving power.
Blinking
When the Power LED is blinking, the switch is
receiving power and is botting up
•Fault LED
Amber
On
When the Fault LED is on, there is an error with the
switch.
Off
When the Fault LED is off, there is no error with the
switch.
•Ethernet Port LEDs (1-48)
Green on
When the Green LED is on, the respective port
is connected at 1000Mbps speed
Off
When the LED is off, the respective port is
either connected at 10/100Mbps or there is No
Link
Green
Blinking
When the LED is blinking green, the port is
transmitting or receiving data on the network.
Green
Solid
When the LED is solid green, there is a
connection between the device and the switch
•SFP Slots (49-52)
Green
When the SFP LED is on, the link established using
the SFP module is operating at 10Gbps speed.
Amber
When the SFP LED is on, the link established using
the SFP module is operating at 1000Mbps speed.
Off
When the SFP LED is on, the link established using
the SFP module is operating at 10/100Mbps
speed or there is no link
Green
blinking
When the SFP LED is blinking, the port is
transmitting or receiving data
Green Solid
When the SFP LED is solid, there is a link
connected
Off
No link established.

© Copyright 2022 TRENDnet. All Rights Reserved.
12
TRENDnet User’s Guide
Multi-Gig Web Smart Switch Series
Switch Installation
Desktop Hardware Installation
The site where you install the hub stack may greatly affect its performance. When
installing, consider the following pointers:
Note: Your switch model may be different than the one shown in the example
illustrations.
•Install the Switch in a fairly cool and dry place.
•Install the Switch in a site free from strong electromagnetic field generators (such
as motors), vibration, dust, and direct exposure to sunlight.
•Leave at least 10cm of space at the front and rear of the hub for ventilation.
•Install the Switch on a sturdy, level surface that can support its weight, or in an
EIA standard-size equipment rack. For information on rack installation, see the
next section, Rack Mounting.
•When installing the Switch on a level surface, attach the rubber feet to the
bottom of each device. The rubber feet cushion the hub and protect the hub
case from scratching.
Rack Mount Hardware Installation
The switch can be mounted in an EIA standard-size, 19-inch rack, which can be placed in
a wiring closet with other equipment. Attach the mounting brackets at the switch’s
front panel (one on each side), and secure them with the provided screws.
Note: The switch model may be different than the one shown in the example
illustrations.
Then, use screws provided with the equipment rack to mount each switch in the rack.

© Copyright 2022 TRENDnet. All Rights Reserved.
13
TRENDnet User’s Guide
Multi-Gig Web Smart Switch Series
Setup Wizard
Section A: Configuring the switch with TRENDnet Hive Cloud Management
Note: Configuration with TRENDnet Hive Cloud Management requires an existing
network with Internet access and DHCP server for automatic IP addressing. The switch
must be configured to reach the Internet in order to connect to your TRENDnet Hive
Cloud Management account.
1. Assign a static IP address to your computer’s network adapter in the subnet of
192.168.10.x (e.g. 192.168.10.25) and a subnet mask of 255.255.255.0.
2. Open your web browser, and type the IP address of the switch in the address bar, and
then press Enter. The default IP address is 192.168.10.200.
3. Enter the User Name and Password, and then click Login. By default:
User Name: admin
Password: admin
Note: User name and password are case sensitive.
4. Select Next to move onto the next screen
Note: If the switch setup wizard does not appear, you can click the setup wizard button
in the top right section of the switch management page to access the switch setup
wizard.
5. Change your login password and click Next. The default password is admin.
Note: If entering a new password, please note that you will need to use the new
password when logging into the switch management page for local management access
moving forward.
6. For the method of management, select TRENDnet Hive.
Note: Configuration with TRENDnet Hive Cloud Management requires an existing
network with Internet access and DHCP server for automatic IP addressing. The switch
must be configured to reach the Internet in order to connect to your TRENDnet Hive
Cloud Management account.

© Copyright 2022 TRENDnet. All Rights Reserved.
14
TRENDnet User’s Guide
Multi-Gig Web Smart Switch Series
7. After selecting TRENDnet Hive, click Next and change your computer’s network
adapter settings to obtain an IP address automatically to continue the rest of the setup
wizard.
Note: After selecting the TRENDnet Hive option and clicking Next, the switch will
immediately change the switch default IP address settings to DHCP and optain IP
address settings from your existing network.
8. Select your Time Zone, then click Next.
9. Enter the user account credentials for your TRENDnet Hive Cloud Management
account to register the switch with your account, then click Next.
10. The summary page will display all of the configuration settings that were applied
through the setup wizard. Click Apply to complete the setup wizard.
Note: You may want to note the new password and IP address settings for local
management access to the switch.
10. To verify the switch is now successfully registered with your TRENDnet Hive Cloud
Management account, the Hive button in the top right will be green to indicate
successful registration.
Section B: Configuring the switch for local network management
1. Assign a static IP address to your computer’s network adapter in the subnet of
192.168.10.x (e.g. 192.168.10.25) and a subnet mask of 255.255.255.0.
2. Open your web browser, and type the IP address of the switch in the address bar, and
then press Enter. The default IP address is 192.168.10.200.
3. Enter the User Name and Password, and then click Login. By default:
User Name: admin
Password: admin
Note: User name and password are case sensitive.
4. Select Next to move onto the next screen
Note: If the switch setup wizard does not appear, you can click the setup wizard button
in the top right section of the switch management page to access the switch setup
wizard.

© Copyright 2022 TRENDnet. All Rights Reserved.
15
TRENDnet User’s Guide
Multi-Gig Web Smart Switch Series
5. Change your login password and click Next. The default password is admin.
Note: If entering a new password, please note that you will need to use the new
password when logging into the switch management page for local management access
moving forward.
6. For the method of management, select Default Management.
7. Configure the switch date and time settings, then click Next.
8. Configure the switch IP address, subnet mask, gateway IP address, and DNS settings
to match the requirements of your existing network using the fields provided, then click
Next.
Note: If the switch IP address settings are changed to a different IP network subnet such
as 192.168.1.x, 192.168.2.x, etc. your computer’s network adapter settings will need to
be changed match the new IP address settings configured on the switch in order to
access the switch management page.
9. The summary page will display all of the configuration settings that were applied
through the setup wizard. Click Apply to complete the setup wizard.
Note: You may want to note the new password and IP address settings for local
management access to switch.