TRENDnet TEG-S2600I - 10/100Mbps Switch With Mini-GBIC... User manual

The TEG-S2600i 26 Port Stackable SNMP switch provides
foundation for a highly scalable and easily managed network. The
Web/SNMP Managed Switch allows network administrators to
remotely monitor and manage network performance and security.
Network administrators can stack up to 16 switches and manage
them with a single IP address. The TEG-S2600i can be incorporated
into high-speed backbone connectivity through Gigabit ports or
mini-GBIC ports. Security and performance are optimized with
advanced features including Port/Tag-based VLAN, QoS, and
Trunking.
TEG-S2600i
26-Port SNMP Stackable Switch
TEW-503PI (07-28-2005) TEG-S2600i
rev:10.27.2005
• Stackable up to 16 Switches with Gigabit Ports
- Single IP function supports up to 32 Switches
- Single IP management with stackable mode (Gigabit ports only)
- Single IP management with agent mode (Any port on the switch)
• Manage all Uplink or Stacked Switches Locally or Remotely with a Single IP Address
- Public IP required when managing remotely; Port 80/28019 need to be opened when running behind a Firewall/Router
• 24 10/100Mbps Auto-Negotiation and Auto-MDIX Fast Ethernet Ports
• 2 Pairs of 10/100/1000mbps Gigabit Copper Port and Mini-GBIC Slot (1 Copper + 1 Mini-GBIC slot per pair)
• Built-in 3Mb Packet Buffer and 1Mb Control Buffer
• Provides 6K MAC, 4K VLAN and 2K Multicast Entries
• Supports 255 Entries of Static MAC and Port Based MAC Table Display
• Supports 802.3x Flow Control for Both Half/Full Duplex Operation
• Supports Head-of-Line Blocking Prevention
• Supports Broadcast Storm Filtering
• Supports Port-Based VLAN (256 Groups), IEEE 802.1Q Tag-Based VLAN (PVID 1~255)
• Supports 802.1v Protocol-Based VLAN Classification
• Supports 802.1x Authentication and Authorization
• Supports IP Multicast, IGMP Snooping and 802.1D Spanning Tree
• Supports 2-Level Priority Queuing
• Supports Port Trunking with Flexible Load Distribution Control and Fail-Over Functions
- Max 7 Trunk groups with 4 ports per group
• Supports Ingress Port Security Mode and By-Port Egress/Ingress Rate Control
• Supports Source-Port-Based, Destination-Port-Based, and Source-Destination-Pair-Based Sniffer Function
• Supports RMON Group 1, 2, 3, 9 and PING Function from the Switch
• Store-and-Forward Switching Architecture with Non-Blocking Wire-Speed Performance
• Configuration via Console Port (serial cable included), SNMP (v1.0, MIB II), TELNET, and Web Browser
• Upgradable Firmware via Browser with TFTP Program
• Standard 19” (1U) Rack Mount Size (kit included)
• 5-Year Warranty
FEATURESFEATURES

Console Port
Interfaces
Packet Forwarding and Filtering Rate
Cabling
Protocol/Topology
Buffer Memory
LED Display
Power Consumption
Dimensions
Weight
Temperature
Humidity
Certifications/Safety
Power
Filtering Address Table
• IEEE 802.3 10Base-T Ethernet • IEEE 802.3u 100Base-TX Fast Ethernet • IEEE 802.3z 1000Base-SX/LX Gigabit Ethernet
• Mini-GBIC: LC Type. 9/125μm or 10/125μm single-mode fiber optic cable (LX)
• IEEE 802.3x Flow Control • IEEE 802.1D Spanning Tree • IEEE 802.1q Tag-based VLAN, Priority Control
• LC Type. 62.5/125μm or 50/125μm multi-mode fiber optic cable (SX)
• RS-232, female 9-Pin Serial Port (M-M serial cable included)
• 6K MAC (255 entry of Static MAC), 4K VLAN and 2K Multicast Entries
• Speed 100M(Green)/10M(Off) • Gigabit Port: 1000Mbps(Green)/Activity(Blinking)
• IEEE 802.1v Protocol-Based VLAN • IEEE 802.1x Authentication and Authorization • IEEE 802.3ad Link Aggregation
• 24 x 10/100Mbps Auto-MDIX RJ45 Fast Ethernet Port • 2 pairs x 1000-Based RJ45 Port and Mini-GBIC Slot*
• 1 x RS-232 Serial Port (Initial Setup) * One RJ45 Port or Mini-GBIC Slot of each pair can be used at a time.
• 1000M Ethernet: 1,488,000 packets per second per port • 100M Ethernet: 148,800 packets per second per port
• (CSMA/CD) / Star
• 10M Ethernet: 14,880 packets per second per port
• Fast Ethernet: UTP/STP Cat. 5, EIA/TIA-568 100-ohm, 100 meters max
• Gigabit Ethernet: UTP/STP Cat. 5, 5E, 6, EIA/TIA-568 100-ohm, 100 meters max
• 1Mb for Control, 3Mb for Packet Filter
• Power On(Green)/Off(Off) • Diagnostic (Blinking) during Initialization • Link(Green)/Activity(Blinking)
• 30 watts max.
• 2.5 Kg. (5.2 lb.)
• 440 x 184 x 44mm (17.3 x 7.3 x 1.8 inch) (W x H x D)
• Operating: 5 ~ 45 C (41 ~ 113 F) • Storage: -20 ~ 70 C (-4 ~ 158 F)
• 10% ~ 90% non-condensing
• FCC, CE
• Input: 100~240VAC, 50/60Hz Internal Power Supply
Standards
Hardware
TRENDnet is a registered trademark. Other Brands and product names are trademarks of their respective holders. Information provided in this document pertain to TRENDnet
products and is subject to change at any time, without notice. For the most recent product information please visit
http://www.trendnet.com.
©
Copyright TRENDnet. All Rights Reserved.
26-Port SNMP Stackable Switch
TEG-S2600i
RELATED PRODUCTSRELATED PRODUCTS
PACKAGE CONTENTSPACKAGE CONTENTS
TEG-S2500i
TEG-S2400i 4-Slot SNMP Modular Switch
• CD-ROM (User's Guide)
• Power Cord
• RS-232 Cable
• Rack Mount Kit
24-Port 10/100Mbps Stackable SNMP Switch with Gigabit Slot
• TEG-S2600i
• Quick Installation Guide
ORDERING INFORMATIONORDERING INFORMATION
To Order Please Call:
1-888-326-6061
3135 Kashiwa Street,Torrance, CA 90505 USA
Tel: [phone]
Fax: [phone]
Web:
Email: [email protected]
www.trendnet.com
SPECIFICATIONSSPECIFICATIONS
NETWORKING SOLUTIONSNETWORKING SOLUTIONS
Workstations with
Fast Ethernet Card
(TE100-PCIWN)
1000Mbps
100Mbps
26-Port SNMP Stackable Switch
(TEG-S2600i)
Server with
Copper Gigabit PCI Adapter
(TEG-PCITXR)
Server with
Copper Gigabit PCI Adapter
(TEG-PCITXR)
Workstations with
Fast Ethernet Card
(TE100-PCIWN)
Multi-mode
Mini GBIC Module
(TEG-MGBSX)
Multi-mode
Mini GBIC Module
(TEG-MGBSX)