TRENDnet TK-IP101 User manual

TK-IP101
Quick Installation Guide

Table of Contents
English ...................................................................................................... 1
1
6
8
3
12
1. Before You Start
2. How to Install .....................................................................................
3. Configure the TK-IP101 .....................................................................
4. Operation ...........................................................................................
.................................................................................
Table of Contents
Version 07.13.2007
Troubleshooting ........................................................................................

System Requirements
Package Contents
1. Before You Start
English
1
?
?
?
?
?
?
?
?
?
TK-IP101
Quick Installation Guide
Utility CD-ROM?
1 Set of 3-in-one KVM cables
RJ-12 to RS-232 (Female) Serial
Cable (Console Management)
RJ-12 to RS-232 (Male) Serial
Cable (Power Control Cable)
RJ-12 to DB-25 Modem Serial Cable
Type A to Type B USB Cable
AC Power Adapter (9V DC, 2A)
Power Cord
?
?
?
?
?
?
?
?
PS/2 Keyboard
PS/2 Mouse
VGA or SVGA Compatible Monitor
RJ-45 network cable
Windows 98SE/ME/2000/XP/2003 Server/Vista, Linux, and Mac OS.
Internet Explorer 5.5 or above
Java 1.2 or above
KVM switch (e.g. TK-200K, TK-204K, TK-205K, TK-207K, TK-209K,
TK-210K, TK-400K, TK-401R, TK-403R, TK-407K, TK-409K, TK-801R,
TK-802R, TK-803R, TK-1601R, TK-1602R, TK-1603R) (Optional)

Application
English
2
KVM 10/100Mbps
PS/2 Keyboard Mouse
PS/2
USB KVM Switch
(TK-803R)
8-Port Rack Mount
Workstations
16-Port 10/100Mbps
Fast Ethernet Switch
(TE100-S16)
Cable/DSL 4-Port
Broadband Router
(TW100-S4W1CA)
in France
Workstation
in Taiwan
Workstation
Workstation
in USA
1-Port KVM
over IP Switch
(TK-IP101)
Internet
Monitor
Modem

2. How to Install
1. Turn off your computer and
disconnect all power cords.
2. Connect the shared keyboard and
mouse to the keyboard and
mouse port.
4. Use the provided KVM cables to
connect your Computer to the
PC/KVM port on the TK-IP101.
3. Connect the shared monitor to the
Monitor port.
Connecting a Single Computer
To TK-IP101
To Computer
English
3
5. Connect an Ethernet cable from
the Ethernet port on the TK-IP101
to the Ethernet port on your
switch/router.

6. Plug the power adapter into the
TK-IP101.
2. Connect the shared keyboard and
mouse to the keyboard and
mouse port.
7. Turn ON your computer and wait
until startup completes.
1. Turn off your computer and
disconnect all power cords.
Connecting Multiple Computers
English
4
3. Connect the shared monitor to the
Monitor port.

5. Connect an Ethernet cable from
the Ethernet port on the TK-IP101
to the Ethernet port on your
switch/router.
7. Refer to your KVM switch's quick
installation guide for connecting
your computer to the KVM switch.
6. Plug the power adapter into the
TK-IP101.
To TK-IP101
To KVM Switch Console port
Your installation is now complete.
Register Your Product
To ensure the highest level of customer service and support, please take a moment to
register your product Online at: www.trendnet.com/register
Thank you for choosing TRENDnet
English
5
4. Connect one end of the provided
KVM cable to the PC/KVM port on
the TK-IP101. Connect the other
end of the provided KVM cable to
your KVM switch's console port.

English
6
1. Open your web browser, type
https://192.168.1.200:5908 in the
Address bar, and then press Enter.
3. Configure the TK-IP101
Note:
1. It is recommended that you configure the TK-IP101 by connecting it directly
to your computer using a Ethernet cable. Before the TK-IP101 can be
configured, a static IP address must be assigned to your computer’s
network adapter in the subnet of 192.168.1.x. Since the TK-IP101’s default
IP address is 192.168.1.200, make sure no other network devices are
assigned an IP address of 192.168.1.200. (Refer to Troubleshooting
section on how to configure TCP/IP settings on your PC.)
2. The default port base is 5900. The port base is used for viewing through the
IPViewer. The port base + 8 (5908) is used to access the browser
configuration of the TK-IP101. Please refer to the User Guide on the Utility
CD-ROM for more information.
3. Enter the User name and
Password, and then click Log in.
By default:
User Name: superuser
Password: superu
2. Click Yes.

English
7
4. Click Main and then click LAN
TCP/IP. Configure the settings to
be in the same subnet as your
network. Then click Store
Settings.
5. Click KVM Server > Main
Settings. If you have a TRENDnet
KVM switch connected to the
TK-IP101, select the Model from
the drop down list, select the
number of computers and then
click Store Settings.
6. Click KVM Server > KVM Switch
Database. Select the fixed part of
your KVM switch's hot key under
escape hot key sequence. For
example, if the Hot Key Sequence
of your KVM switch is Scroll-Lock
Scroll-Lock + [Port Number],
then select SCRLK for the first two
dropdown menus. Then click
Store.
7. Click Apply Settings, and then
click Restart Servers to save all
settings.

3. Click Run.
4. Click Run.
5. Follow the IPViewer Setup
Wizard instructions and then click
Finish.
1. Follow step 1, 2, and 3 in section 3
to log on to the browser
configuration.
2. Click Download and then
Viewers. Then click Download.
English
8
4. Operation
Viewing Locally
Windows