TREX Reptile User manual

reptile
User manual
20113-manual_Reptile.indd 1 07/04/08 13:47:50

20113-manual_Reptile.indd 2 07/04/08 13:47:58

CONGR ATUL ATIONS
on your purchase of Reptile, a brand new member of the
renowned Replica family of delay pedals from T-Rex
Engineering.
Reptile offers a full range of advanced delay features
– including tape-delay flutter simulation – in a compact,
intuitively designed unit. And of course it delivers loads of
incredible warm tone that you’ll only find in a T-Rex pedal.
Turn the page to learn about the controls on your Reptile.
And please handle it with care… because this baby bites!
20113-manual_Reptile.indd 3 07/04/08 13:48:01

CONTROL YOUR REPTILE!
The main controls on your Reptile are the ECHO, REPEAT, TIME and
LEVEL knobs, while the FLUTTER DEPTH & SPEED knobs and the
MODULATION button provide further options.
ECHO determines the mix of direct and delayed signal. Turn it down
for a subtler natural effect, and crank it up for doubling or freaky long
delay effects.
The REPEAT knob lets you control the number of times a sound is
repeated – from just once to a virtual infinity.
TIME determines the rate of your echo repeats and can be adjusted
from 10 to 1,000 ms. TIP: to experiment, try tuning in a classic 50s
slap-back sound by combining a fast time with a low repeat value.
20113-manual_Reptile.indd 4 07/04/08 13:48:04

The FLUTTER DEPTH & SPEED controls let you simulate that great
tape-delay “warbled” effect, while the MODULATION button subtly
alters the character of your delay.
Note: The INPUT LEVEL knob on the side of your Reptile eliminates
overdrive distortion caused by too high an input signal. Keep it set
just below where the red light comes on.
Technical specs:
Controls: ON/OFF, ECHO, REPEAT, TIME, LEVEL, FLUTTER DEPTH AND SPEED,
MODULATION and INPUT LEVEL
Connections: INPUT, OUTPUT, power supply
Power supply: 9V DC
Power consumption:
120 mA
Size:
Box: 100 x 120 x 35 mm. Switches/knobs on top: 16 mm.
Feet on bottom: 3 mm
20113-manual_Reptile.indd 5 07/04/08 13:48:04