Triad InRoom Bronze Pedestal User manual

Attach the joining plate over the wire.
Use the shorter screws
and four washers
Attach the wire to the speaker.
Open the plastic bag
Pour in the sand
Tighten the zip-tie
around the bag
and tuck it in.
Attach the base.
Use the longer screws
and two washers
Assemble the Stand Attach the Speaker
To add stability to the stand, we recommend you fill the base with dry sand. It holds about 20 pounds, or
about 5 quarts (liters). For even more stability use lead shot, usually available at sporting goods stores.
InRoom Bronze LCR
Run the wire thru the stand.
Stand Assembly Instructions
5
6
7
*
Optional, but recommended
*
Black is negative
Red is positive
4
1
2
3