Triad OUTDOOR OD25 User manual

TRIAD QUICK START GUIDE - OUTDOOR OD25 & OD26
www.triadspeakers.com | 1-800-666-6316 | DOC-00285-C
OVERVIEW
Triad outdoor speakers are attractive, weather-resistant speakers
engineered in the U.S. to have a rich and full sound. To help them better
integrate into their surroundings, Triad Outdoor Speakers are available
in custom colors directly from Triad. Thank you for purchasing this
product!
IN THE BOX
Two (2) Speaker Assemblies
including:
A - Enclosure
B - Bracket
C - Assembly knobs
D - Silicone binding post covers
Enclosure size (H x W x D) in.
Enclosure WITH bracket
(H x W x D) in.
Enclosure size (H x W x D) mm
Enclosure WITH bracket
(H x W x D) mm
Product weight /each
Shipping weight / pair
Shipping weight
Master pack (4 ea.)
Tweeter - size (in./mm)
Tweeter material
Woofer - number & size
(in./cm)
Woofer material
Recommended
amplifier power (W)
Nominal Impedance (ohms)
Minimum Impedance (ohms)
Sensitivity (dB @ 2.83v, 1 m)
Frequency Response
2 π+/- 3dB (Hz)
10 9/16 x 7 1/2 x 7 1/2
10 9/16 x 7 1/2 x 8 1/2
270 x 190 x 190
270 x 190 x 216
7.5lb / 3.4kg
17lb / 7.7kg
37lb / 16.8kg
1" / 25mm
Titanium
(1) 5.25" / 14cm
Carbon fiber
25-150
6
4.8
84
75 - 20k
OD26
12 7/16 x 8 7/8x 8 1/4
12 7/16 x 8 7/8x 9 3/8
319 x 224 x 210
319 x 224 x 238
9lb / 4.1kg
21.5lb / 9.8kg
47lb / 21.4kg
1" / 25mm
Titanium
(1) 6.5" / 17cm
Carbon fiber
25-150
6
4.8
86
65 - 20k
OD25
SPECIFICATIONS
WARRANTY
DIMENSIONS - OD26
DIMENSIONS - OD25
x 2
190
7.5
268
10.5
270.4
10.7
190.2
7.5
2.4
0.1
268
10.5
270.4
10.7
216.2
8.5
94.8
3.7
224
8.8
317
12.5
319.5
12.6
2.5
0.10
238.2
9.4
107.2
4.2
210
8.3
317
12.5
2.5
0.1
319.5
12.6
A
B
C
C
D
Triad Speakers warranty information
Find details of the product’s Limited Warranty and other resources such as
regulatory notices and patent and safety information, at snapone.com/legal
or request a paper copy from Customer Service at 866.424.4489.
Return Merchandise Authorization (RMA) information
For Sales RMAs contact your Inside Sales Associate. Your ISA information
can be found in the My Account section of the Dealer Portal under
Control4 Contacts.
Technical Support information
For chat and telephone, visit ctrl4.co/techsupport
Email: [e-mail]
Visit tech.control4.com/technician for discussions, instructional videos, news,
and more.
Copyright
Copyright ©2022, Snap One, LLC. All rights reserved. Snap One and its
respective logos are registered trademarks or trademarks of Snap One,
LLC, in the United States and/or other countries. Control4 and Strong are
also registered trademarks or trademarks of Snap One, LLC. Other names
and brands may be claimed as the property of their respective owners.
Snap One makes no claim that the information contained herein covers all
installation scenarios and contingencies, or product use risks. Information
within this specification subject to change without notice.

TRIAD QUICK START GUIDE - OUTDOOR OD25 & OD26
www.triadspeakers.com | 1-800-666-6316 | 200-30340-C, DOC-00285-C
On a wall, vertically On a wall, horizontally Under an eave
SPEAKER PLACEMENT
Traid Outdoor OD25 & OD26 speakers can be installed in numerous
locations. The bracket can be axed vertically or horizontally.
INSTALLATION
To install the speakers, first install the bracket to desired location.
INSTALLATION, cont. INSTALLATION, cont.
1Pass wire through
hole in bracket.
MAKE SURE
CUTOUTS IN
BRACKET ARE
ORIENTED
CORRECTLY
2Screw bracket to wall, keeping
screws (not included) LOOSE.
3Slide bracket so screw
heads are securely in a slot.
Tighten screws.
GRILLE REMOVAL & REPLACEMENT
46
A
B
B
A
B
Assemble speaker into bracket.
Screw knobs LOOSELY through
bracket into enclosure.
5Attach wires to binding posts in back
of speaker. Be sure to keep proper
polarity from the amplifier to the
speakers.
Push binding posts
down to align wire
holes & insert wire.
Release binding
post top when wire
has been inserted.
If grille removal is necessary for any reason, see instructions below:
red
positive
post
polarity indicators
black
negative
post
REMOVE: Use a Triad Grille
Pick or other suitable tool to
grab grille & pull outward.
REPLACE: First slip bottom end
into enclosure, then slide
downward and push top into
place.
Aim speakers to optimal position, then tighten both
knobs.
Slide silicone binding post
cover over binding posts
to protect against
moisture.
Small slits in front of
binding post cover slip
over wires until wires
are seated in the holes.
7