Tripp Lite N785-INT-LC-MM User manual

1
Owner’s Manual
10/100/1000
Media Converters
Models: N785-INT-LC-MM (850nm),
N785-INT-SC-MM (850nm),
N785-INT-SC (1310nm)
1111 W. 35th Street, Chicago, IL 60609 USA
www.tripplite.com/support
Copyright © 2018 Tripp Lite. All rights reserved.
PROTECT YOUR INVESTMENT!
Register your product for quicker service and ultimate
peace of mind. You could also win an ISOBAR6ULTRA
surge protector—a $100 value!
www.tripplite.com/warranty
Este manual esta disponible en español en la página de
Tripp Lite: www.tripplite.com/support
Ce manuel est disponible en français sur le site Web de
Tripp Lite : www.tripplite.com/support
Русскоязычная версия настоящего руководства
представлена на веб-сайте компании Tripp Lite по
адресу: www.tripplite.com/support
17-11-382-93-371D-EN.indd 1 1/23/2018 4:57:39 PM

2
Product Features
• N785-INT-SC extends a 10/100/1000 Mbps
Ethernet connection over multimode fiber cable up
to 2000 m
• N785-INT-LC-MM and N785-INT-SC-MM extend
a 10/100/1000 Mbps Ethernet connection over
multimode fiber cable up to 550 m
• LED indicators monitor the Ethernet and fiber link
status of the media converters
• Supports both full-duplex and half-duplex operation
• Supports Auto MDI / MDI-X
• Includes an international power supply with
compatible North American, U.K., European
(Schuko) and Australian plug adapters
Package Contents
• Media Converter
• External Power Supply*
(Input: 100-240V, 50/60 Hz, 0.35A; Output: 5V 2A)
• Owner’s Manual
* Includes NEMA 5-15P (North America), CEE 7/16 Schuko
(Europe), BS 1363 (U.K.) and AS/NZS 3112 (Australia)
plugs.
17-11-382-93-371D-EN.indd 2 1/23/2018 4:57:39 PM

3
Optional Accessories
• N001-Series Cat5e Snagless Patch Cables
• N201-Series Cat6 Snagless Patch Cables
• N306-Series Duplex Multimode 62.5/125 Fiber
Patch Cables (SC/SC)
• N320-Series Duplex Multimode 62.5/125 Fiber
Patch Cables (LC/LC)
• N506-Series Duplex Multimode 50/125 Fiber Patch
Cables (SC/SC)
• N520-Series Duplex Multimode 50/125 Fiber Patch
Cables (LC/LC)
Installation
Notes:
1. The following installation instructions refer to an installation
in which two media converters are used.
2. The installation diagram on the next page features a
N785-INT-LC-MM. Connections are the same for all models,
with only the specs of the media converter being different.
(See the Specifications section in this manual for details on
your media converter.)
3. To avoid damage due to Electrostatic Discharge (ESD), it
is recommended you handle the product while wearing
an ESD wrist grounding strap or by touching a conductive
surface (such as metal) to discharge any potential ESD prior
to handling the product.
17-11-382-93-371D-EN.indd 3 1/23/2018 4:57:39 PM

4
Installation
1Connect the RJ45 port on the media converter to your
network using a Cat5e/6 cable.
2Connect the media converter to a second identical
media converter using the appropriate type of fiber cable,
making sure to connect the TX port on one unit to the
RX port on the other.
Note: Reference the Product Features section to
determine which type of fiber cable is supported by your
media converter.
3Connect the RJ45 port on the second media converter to
your network device (workstation, hub, switch, etc.) using
a Cat5e/6 cable.
4Connect the external power supplies that came with each
media converter, and plug them into a power source.
Network
Power Source Power Source
Network Device
1 3
4 4
2
17-11-382-93-371D-EN.indd 4 1/23/2018 4:57:40 PM

5
LED Status Table
LED Status Description
FP – PWR On The unit is powered on
FP – PWR Off The unit is not powered on
FP – L/A On A link is detected between the
connected fiber ports
FP – L/A Blinking Fiber data transmission is taking
place
FP – L/A Off No link is detected between fiber
ports
FP – SD On A fiber signal is detected
FP – SD Off No fiber signal is detected
TP – SPD On 1000 Mbps
TP – SPD Off 100 Mbps
TP – L/A On A UTP link is detected
TP – L/A Blinking UTP data transmission is taking
place
TP – L/A Off No UTP link is detected
TP – FDX/COL On The unit is operating in Full-Duplex
mode
TP – FDX/COL Off The unit is operating in Half-Duplex
mode
17-11-382-93-371D-EN.indd 5 1/23/2018 4:57:40 PM

6
Specifications
Specification N785-INT-LC-MM N785-INT-SC-MM N785-INT-SC Optical Wavelength (nm) Multimode
(850)
Multimode
(1310)
Network Speed (Mbps) 10/100/1000 Transmission Distance 550 m
(1804 ft.)
2000 m
(6561 ft.)
Duplex Mode Full / Half (Auto-Detect) Optical Output Power Range (dBm) -8 to -3 Optical Input Power Range (dBm) ≤-19 Power Budget (dBm) 11 Power Supply Input 100-240V, 50/60 Hz Power Supply Output 5V 2A Operating Temperature 0° to 60° C (32° to 140° F) Storage Temperature -20° to 70° C (-4° to 158° F) Relative Humidity 5 to 90% RH, Non-Condensing Unit Dimensions [H x W x D] 25 x 94 x 71 mm (1 x 3.7 x 2.8 inches) Unit Weight 0.47 kg (1.03 lb.) 0.45 kg (1 lb.)
17-11-382-93-371D-EN.indd 6 1/23/2018 4:57:40 PM

7
2-Year Limited Warranty
Seller warrants this product, if used in accordance with all applicable
instructions, to be free from original defects in material and workmanship
for a period of two (2) years from the date of initial purchase. If the product
should prove defective in material or workmanship within that period, Seller
will repair or replace the product, in its sole discretion. Service under this
Warranty can only be obtained by your delivering or shipping the product
(with all shipping or delivery charges prepaid) to: Tripp Lite, 1111 W. 35th
Street, Chicago, IL 60609 USA. Seller will pay return shipping charges.
THIS WARRANTY DOES NOT APPLY TO NORMAL WEAR OR TO DAMAGE
RESULTING FROM ACCIDENT, MISUSE, ABUSE OR NEGLECT. SELLER
MAKES NO EXPRESS WARRANTIES OTHER THAN THE WARRANTY
EXPRESSLY SET FORTH HEREIN. EXCEPT TO THE EXTENT PROHIBITED BY
APPLICABLE LAW, ALL IMPLIED WARRANTIES, INCLUDING ALL WARRANTIES
OF MERCHANTABILITY OR FITNESS, ARE LIMITED IN DURATION TO THE
WARRANTY PERIOD SET FORTH ABOVE; AND THIS WARRANTY EXPRESSLY
EXCLUDES ALL INCIDENTAL AND CONSEQUENTIAL DAMAGES. (Some states
do not allow limitations on how long an implied warranty lasts, and some
states do not allow the exclusion or limitation of incidental or consequential
damages, so the above limitations or exclusions may not apply to you.
This Warranty gives you specific legal rights, and you may have other rights
which vary from jurisdiction to jurisdiction).
WARNING: The individual user should determine prior to use whether this
device is suitable, adequate or safe for the use intended. Since individual
applications are subject to great variation, the manufacturer makes no
representation or warranty as to the suitability or fitness of this device for
any specific application.
PRODUCT REGISTRATION
Visit www.tripplite.com/warranty today to register the warranty for your
new Tripp Lite product. You’ll be automatically entered into a drawing for a
chance to win a FREE Tripp Lite product!*
* No purchase necessary. Void where prohibited. Some restrictions apply.
See website for details.
FCC Notice, Class B
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Warranty & Product Registration
17-11-382-93-371D-EN.indd 7 1/23/2018 4:57:40 PM

8
Warranty & Product Registration
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications to this equipment not expressly approved by
Tripp Lite could void the user’s authority to operate this equipment.
WEEE Compliance Information for Tripp Lite Customers and Recyclers
(European Union)
Under the Waste Electrical and Electronic Equipment (WEEE) Directive
and implementing regulations, when customers buy new electrical
and electronic equipment from Tripp Lite they are entitled to:
• Send old equipment for recycling on a one-for-one, like-for-like
basis (this varies depending on the country)
• Send the new equipment back for recycling when this ultimately
becomes waste
Use of this equipment in life support applications where failure of this
equipment can reasonably be expected to cause the failure of the life
support equipment or to significantly affect its safety or effectiveness is not
recommended.
Tripp Lite has a policy of continuous improvement. Specifications are
subject to change without notice.
1111 W. 35th Street,
Chicago, IL 60609 USA
www.tripplite.com/support
17-11-382 93-371D_RevC
17-11-382-93-371D-EN.indd 8 1/23/2018 4:57:40 PM