
Michelle Push Button Shower Head
INSPECTING THE HOSE
Your shower hose should be inspected
from time to time for signs of damage or
internal collapse.
Internal collapse can restrict the ow
rate from the shower head and may
cause damage to the shower, especially
an electric shower.
Triton recommends use of a branded
anti-twist hose on all showers to
ensure continuous safe performance.
To inspect your hose:
1. Unscrew the hose from the shower head
and the shower outlet.
2. Inspect the hose for damage, internal
kinks, etc.
3. If necessary, replace the hose.
SHOWER HEAD SPRAY PATTERNS
Three spray patterns are available.
Adjust the pattern by pressing the button
until the desired pattern is obtained.
INSTALLATION
Before installing the shower head, flush the
pipework through to remove any debris
that may be in the system.
TYPE OF SHOWER HEAD
Fitting the correct type of shower head
is critical to the safe performance of
your shower, especially if you have an
electric shower. This shower head is only
suitable for use on mixer showers as the
ow of water from it can be restricted or
stopped completely making it unsuitable
for electric, digital and power showers.
CLEANING
Triton recommends that all products are
cleaned using warm, soapy water.
DO NOT use abrasive or aggressive
chemical cleaning products as this may
affect the product surface and finish.
Before cleaning, turn off the unit at the
mains supply to avoid the shower being
accidentally switched on. The shower head
may be cleaned by simply rubbing your
thumb over the spray plate.
IT IS IMPORTANT TO KEEP THE
SHOWER HEAD CLEAN TO MAINTAIN
THE PERFORMANCE OF THE SHOWER.
The hardness of the water will determine
the frequency of cleaning. For example, if
the shower is used every day in a very hard
water area, it may be necessary to clean
the shower head on a weekly basis.