TRIUMPH BOARD INTERACTIVE FLAT PANEL Series User manual

Service Manual
Interactive Flat Panel Series
86″
EAN: 8592580112645 / 8592580114069

© Copyright 2018 TRIUMPH BOARD This document contains confidential information which can be used by the recipient only for servicing the above product.
Reproduction or distribution of any content of this document without permission is strictly forbidden.
2
CONTENTS
1.Safety Precautions.........................................................................................................................................3
2. Product BOM .................................................................................................................................................4
2.1 BOM of 86”IFP.......................................................................................................................................4
3. Product Specification....................................................................................................................................7
3.1 Machine Specification............................................................................................................................7
3.2 Block Diagram of IFP.............................................................................................................................9
3.3 IFP internal wiring Diagram.................................................................................................................11
3.4 MP600S-K Power Board (86”)............................................................................................................12
3.5 Mainboard Parameters........................................................................................................................14
3.6 OPS Adapter Board..............................................................................................................................19
4. Disassembly Steps.....................................................................................................................................20
4.1Tool Preparation.....................................................................................................................................20
4.2 Disassembly Procedure.......................................................................................................................20
5. Software Debugging Instructions .............................................................................................................33
5.1 Upgrade via Factory Menu..................................................................................................................33
5.2 Upgrade via side buttons.....................................................................................................................36
6. Troubleshooting for IFP UHD series........................................................................................................40
6.1 Abnormal display..................................................................................................................................40
6.2 No image................................................................................................................................................40

© Copyright 2018 TRIUMPH BOARD This document contains confidential information which can be used by the recipient only for servicing the above product.
Reproduction or distribution of any content of this document without permission is strictly forbidden.
3
1. Safety Precautions
Please read the following instructions carefully in order to avoid possible dangers during use:
➢Keep the machine away from rain, damp or direct sunlight;
➢Avoid the ingress of any liquid substance into the machine;
➢DO NOT place the IFP near any heat sources such as heater or radiation source;
➢Please cut off power supply after use of the IFP;
➢Power off the IFP prior to cleaning, and DO NOT use any corrosive liquid to wipe the machine surface;
(TRIUMPH BOARD CLEANING PADS are recommended)
➢When using the plug, pay attention not to forcedly push the plug into the port. When connecting the
machine, ensure that the port is free from chips, that the plug matches the port and that the direction of
the plug corresponds to that of the port;
➢During use, heat generated inside the machine is dissipated via the air inlets/outlets on the back of the
machine. DO NOT use any other object to cover the machine; keep each air inlet and outlet unblocked
so that heat generated inside the machine can be dissipated outward via the heat dissipation channel;
➢This machine contains no user-serviceable components except operation software. DO NOT attempt
to disassemble the machine. If the IFP needs repair, please consult the accompanying service and
support information to know how to contact our authorized service providers for service. Unauthorized
disassembly of the machine may cause damage to the machine; such damage is not covered under
warranty.

© Copyright 2018 TRIUMPH BOARD This document contains confidential information which can be used by the recipient only for servicing the above product.
Reproduction or distribution of any content of this document without permission is strictly forbidden.
4
2. Product BOM
2.1 BOM of 86″ IFP
Bill of Main Materials of 86″ IFP
Document No.: Version: 3.0
No.
Material Code
Material Name & Specification
QTY
Position
I: PCBs
1
EAN: 8592580114564
9011-11K826-A43T5221
≥26” K8A big board 12V MSD6A828EVC (without Dolby)
7-way HDMI + 4-way USB + RJ45 port network mainboard (Asia DTMB,
PWM dimming) (with optical fiber) (mechanical plug-in) (without TV
function, V-by-One output) (partial electronic materials are supplied by
customer), Version A5 (16G)
1
Mainboard
2
EAN: 8592580114571
9012-111401-53601011
86” LED power board assembly (backlight 430mA 132V--154V 5-way)
(model: MP600S-K1), Version A1
1
Power board
3
EAN: 8592580114786
9045-1100PS-00002011
KJ OPS adapter board assembly (mechanical plug-in) (partial electronic
materials are supplied by customer), Version A2
1
OPS adapter
board
4
EAN: 8592580114588
9014-112000-00001011
KJ_E90 series 7SW button board assembly, Version A1
KJ_75” OC_7SW key board assembly,Version A1
1
Key board
5
EAN: 8592580114793
9032-11JE90-U0001011
KJ_E90 series USB-U adapter assembly, Version A1
1
Rear adapter
board
6
EAN: 8592580114601
9046-14JE91-00001011
KJ_E91 light sensor board, Version A1 (special for technology)
1
Light sensor
board
7
EAN: 8592580114618
9018-11JE93-00001011
KJ_E93-AV board,Version A1
1
Front adapter
board
8
EAN: 8592580114809
9025-112000-00012011
RS232 port adapter board assembly, Version A2
1
RS232 adapter
board

© Copyright 2018 TRIUMPH BOARD This document contains confidential information which can be used by the recipient only for servicing the above product.
Reproduction or distribution of any content of this document without permission is strictly forbidden.
5
9
EAN: 8592580114816
9015-111B21-32012011
W22B21 remote receiver board assembly (red-green), Version A2 (back
soldering)
1
Remote receiver
board
10
EAN: 8592580114595
9051-11J000-CBT61041
Touch frame serial port to USB adapter board assembly (special for CVT
FC series touch frame) (partial electronic materials are supplied by
customer)
1
Touch frame
adapter board
II: cable
1
EAN: 8592580114823
6142-450035-04111201
450mm two-terminal (4 pins with the 4th pin lacked), RS232 adapter wire
(conforming to UL requirement)
1
RS232 adapter
connecting
cable
2
EAN: 8592580114830
6130-050014-61461001
500mm 19pin black HDMI signal line (UL-certified) (technology)
1
HDMI cable
3
EAN: 8592580114847
6140-750214-06112301
750/500mm three-terminal wire, 6pin-PHS2.0, 5pin-PHS2.0, DC plug
1
Power board to
OPS connecting
cable
4
EAN: 8592580114854
6140-75000A-51001203
750mm two-terminal V-BY-ONE cable (51pin to 51in)
1
V-BY-ONE
cable
Pin socket assembly
1
EAN: 8592580114649
6254-250010-13310001
250VAC horizontal three-pin power socket
1
Power socket
2
EAN: 8592580114632
6264-250008-13210001
TV-5 8/128A 250VAG 4pin rocker power switch
1
Power switch
Speaker assembly
1
EAN: 8592580114625
7711-A88682-32101011
8Ω 20W box speaker (L150×W40×D50mm) with sponge cushion, special
for LED TV
2
Speaker
III: Structural Parts
Plastics
1
EAN: 8592580114861
7034-420L21-40001101
42L21 remote receiver (PC 50% transparent tawny)
1
Remote
reception
window

© Copyright 2018 TRIUMPH BOARD This document contains confidential information which can be used by the recipient only for servicing the above product.
Reproduction or distribution of any content of this document without permission is strictly forbidden.
6
2
EAN: 8592580114878
7030-75E90K-A6111101
75E90K Grey plastic torsion (7 keys)
1
plastic torsion
Glass
1
EAN: 8592580114885
74B0-751696-97404023
86E89K Single surface spraying AG tempered
glass(1948.8x1120x4)(black silkscreen print 1897x1068)
1
Touch frame
glass
Metals
1
EAN: 8592580114892
71Y1-75E89K-A3110001
86E89K-C2 White aluminum face frame assembly(TRIUMPH BOARD
logo)
1
Metal face
frame assembly
2
EAN: 8592580114908
71Y2-75E89K-A6140001
86E89K-C2 rear shell of gray sheet metal(TRIUMPH BOARD)
1
Metal rear shell
Screen assembly
1
EAN: 8592580114540
7422-750LGK-3I5A9071
86" TFT KTC K860WD90-LA400A1 LED backlight screen (RGB)
(12V+51pin+UHD+10bit/60Hz) (structure:11*20,electrical:5*44/430mA) |
aluminum face frame of natural color (supplied by customer)
1
Panel
2
EAN: 8592580114557
74C1-750TTC-30000011
86″TN8632-BWST0 IR touch frame(ture 32-point)(PCBA)(serial)(without
glass OC)(Timelink)
1
Touch frame
IV: Packaging
1
EAN: 8592580114281
7601-11A132-01110003
White multimedia neutral remote control (TRIUMPH BOARD) (full matte)
for smart digital-analog TV, RC-A13-CH-03
1
Remote control
2
EAN: 8592580113949
7928-PEN007-51010021
White with magnetic stylus pen, 7mm
2
Stylus pen

© Copyright 2018 TRIUMPH BOARD This document contains confidential information which can be used by the recipient only for servicing the above product.
Reproduction or distribution of any content of this document without permission is strictly forbidden.
7
3.Product Specification
3.1 Machine Specification
Supported signal
ports and
description (video
input)
AV input
Input impedance: 75Ω;
Signal level: 1 ± 0.3 Vp-p;
Audio level (L/R): 0.2-2Vrms;
Video systems: PAL, NTSC, SECAM
RCA (yellow, white, red) terminal
YPbPr
Input impedance: 75Ω;
Signal level (Y, Pb/Cb and Pr/Cr): Y: 1 ± 0.3 Vp-p, Pb/Pr (Cb/Cr): 0.7 ± 0.3 Vp-p;
Audio level (L/R): 0.2-2Vrms;
Max. resolution: 1080P
RCA (green, blue, red) terminal
PC
Input impedance: 75Ω;
Signal level: 0.7 ± 0.15Vp-p;
Audio level (L/R): 0.2-2Vrms;
Max. resolution: 1080P@60Hz
15pin VGA socket D-Sub
HDMI
Max resolution: 4K*2K@60Hz
HDMI 19pin SMT horizontal socket
USB
Support USB flash drive, USB mobile hard drive (if the load exceeds 500mA, a power
supply should be additionally equipped by user), USB mouse and keyboard, etc.
USB2.0: 4pin USB horizontal socket
USB3.0: 9pin USB
RJ45
10M/100Mbps
SPDIF
Max. transmission speed: 16Mbps
Optical fiber terminal
Power supply
Input power
SB5V; normal power supply mode
PM12V/5V; controllable mode

© Copyright 2018 TRIUMPH BOARD This document contains confidential information which can be used by the recipient only for servicing the above product.
Reproduction or distribution of any content of this document without permission is strictly forbidden.
8
Drive-screen
voltage
12V
USB power
management
The supply voltage does not exceed 5V; the load current does not exceed 500mA
Main power
management
The standby current of mainboard does not exceed 30mA
Others
Power
amplifier
2X10W (8Ω) THD+N<10% @1KHz;
Speaker
output
(Supply voltage: 12V; audio input: 0.5 Vrms)
Key control
POWER, Menu, Vol-, Vol+, CH-, CH+, Gesture ON/OFF..
LED indicator
The LED light is lit in green during normal operation, and in red during standby
OSD language
English (other languages can be added as required)

© Copyright 2018 TRIUMPH BOARD This document contains confidential information which can be used by the recipient only for servicing the above product.
Reproduction or distribution of any content of this document without permission is strictly forbidden.
9
3.2 Block Diagram of IFP
LCD Panel
Power board ON/OFF
MSD6A828
Main Board
AV-IN
VGA-IN
PC-Audio
YPbPr HDMI
(1/2/3/4)
USB
(2.0/3.0) AV-OUT
SPDIF EarphoneLAN
RS232
adapter
board
Speaker
IR&KEY
12V
V-By-One
Backlight ADJ
5V VBS
5V
12V
5V STB
220V
OPS
adapter
board
12VHDMI-OUT
Hard
disk
LAN
port
PC USB WIFI
Antenna
OPS built-in HDMI
OPS control port
220V
AC IN
Front adapter
board
PC-USB
MEDIA-USB
HDMI -OUT
Rear adapter
board
Touch frame (TOUCH USB IN)
OPS TOUCH USB
Light sensor
board
102V 500mA
PC
module
80pin
OPS port
➢MSD6A828 signal board: Controls signals from/to all output and input ports, effectively decode input
audio/video signals, and send V-by-One signals to T-CON board, thus to get control of core chassis
functions;
➢Power board: Supply voltage to MSD6A828 signal board, speaker and OPS PC (12V);
➢LCD module: Displays picture;
➢Touch frame: Realize touch function;
➢Front adapter board: Front extended OPS PC-USB port, front extended HDMI port, front extended
Touch-USB port, front extended MEDIA-USB port, extended MIC port, extended headset port;
➢Rear adapter board: Extended OPS PC-USB port, rear extended Touch-USB port;
➢RS232 adapter board: uses the standard DB9 RS232 port, allowing RS232 remote control;
➢PC module: Built-in PC module;

© Copyright 2018 TRIUMPH BOARD This document contains confidential information which can be used by the recipient only for servicing the above product.
Reproduction or distribution of any content of this document without permission is strictly forbidden.
10
➢Power switch (ON/OFF): Main power switch of machine;
➢Light sensor board: Acquire the value of ambient light and sends it to the mainboard;
➢Touch frame adapter board: Converts serial port signals to USB signals to provide touch signals for
Android mainboard;
➢IR board: Receives remote control signals from the remote control and sends them to the mainboard;
➢Key board: Acquire button signals and sends them to the mainboard;
➢OPS adapter board: OPS port to HDMI port, USB port and power port.

© Copyright 2018 TRIUMPH BOARD This document contains confidential information which can be used by the recipient only for servicing the above product.
Reproduction or distribution of any content of this document without permission is strictly forbidden.
11
3.3 IFP internal wiring Diagram

© Copyright 2018 TRIUMPH BOARD This document contains confidential information which can be used by the recipient only for servicing the above product.
Reproduction or distribution of any content of this document without permission is strictly forbidden.
12
3.4 MP600S-K Power Board (86″)
3.4.1 Picture of MP600S-K1 Power Board
MP600S-K1 is a multi-output power board with the total output power of 580W; it outputs voltages of
+5VSB, +5V, +12V and +24V; also, it is equipped with a short-circuit/over-current/over-voltage protection
circuit.
3.4.2 Definition of Power Board Socket Pins:
Socket
Pin
Definition
Function
CON4
1, 2
AC-L
AC INPUT LINE
3
NC
NC
4, 5
AC-N
AC INPUT NEUTRAL
CN201
1, 2, 7, 8, 11
GND
GROUND
3,4
+5V
+5VDC OUTPUT

© Copyright 2018 TRIUMPH BOARD This document contains confidential information which can be used by the recipient only for servicing the above product.
Reproduction or distribution of any content of this document without permission is strictly forbidden.
13
5
PS/ON
SMPS ON/OFF
CONTROL(ON = HIGH)
6
+5VSB
STANDBY(+5VDC)
OUTPUT
9, 10
+12V
+5VDC OUTPUT
12
+24V
GROUND
13
BK/ON
Back Light ON/OFF
14
ADJ
Back Light Adjust(PWM)
CN202
1, 2, 3
+24V
+24V DC OUTPUT
4, 5, 6
GND
GROUND
CN203
1, 2, 3
+12V
+12V DC OUTPUT
4, 5, 6
GND
GROUND
CN206
1, 2, 3, 4, 5
LED-
LED RETURN
6, 7, 8
NC
NC
9, 10, 11, 12
LED+
LED OUTPUT

© Copyright 2018 TRIUMPH BOARD This document contains confidential information which can be used by the recipient only for servicing the above product.
Reproduction or distribution of any content of this document without permission is strictly forbidden.
14
3.5 Mainboard Parameters
3.5.1 Picture of MSD6A828 Mainboard
3.5.2 Supported Formats
➢Formats supported by HDMI
Resolution
Aspect Ratio
Field Frequency
640×480
4:03
60Hz
720×480
4:03
60Hz
720×480
16:09
60Hz

© Copyright 2018 TRIUMPH BOARD This document contains confidential information which can be used by the recipient only for servicing the above product.
Reproduction or distribution of any content of this document without permission is strictly forbidden.
15
1280×720P
16:09
60Hz
1920×1080i
16:09
60Hz
1920×1080P
16:09
60Hz
3840×2160
16:09
30Hz
3840×2160
16:09
60Hz
Remark: Only HDMI4 port can reach the resolution of 3840x2160@60Hz; other HDMI ports can
only reach up to 1920x1080@60Hz.
➢Formats supported by USB mobile storage device (picture, movie, music)
File Type
Supported File Formats
File Name Suffixes
Image
JPEG, BMP, PNG
.jpg\.bmp\.png
Video
MPEG1, MPEG2, MPEG4, H264, RM,
RMVB, MOV, MJPEG, VC1, DivXFLV
.avi\.mpg\.dat\.vob\.div\.mov\.mkv\.rm\.rmvb\.m
p4\.mjpeg\.ts\.trp\.wmv\.asf\.flv
Audio
MP3, M4A（AAC）
.mp3\.m4a
3.5.3 Definition of Mainboard Ports
➢CON2(8pin/2.0mm), CON3(5pin/2.0mm): Power Connector:
NO.
SYMBOL
DESCRIPTION
NO.
SYMBOL
DESCRIPTION
1
5V_N
5V normal power supply
5
12V_N
12V normal power supply
2
5V_N
5V normal power supply
6
12V_N
12V normal power supply
3
GND
Ground
7
GND
Ground
4
GND
Ground
8
GND
Ground
NO.
SYMBOL
DESCRIPTION
NO.
SYMBOL
DESCRIPTION
1
5V_S
5V normal power supply
4
GND
Ground

© Copyright 2018 TRIUMPH BOARD This document contains confidential information which can be used by the recipient only for servicing the above product.
Reproduction or distribution of any content of this document without permission is strictly forbidden.
16
2
5V_S
5V normal power supply
5
Standby
Standby control (ON: ≥3V;
OFF: ≤1V)
3
GND
Ground
➢CN102 (3pin/2.0mm): Backlight connector
➢IR & key connector; position: CON9 (12pin/2.0mm)
NO.
SYMBOL
DESCRIPTION
NO.
SYMBOL
DESCRIPTION
1
IR_IN
IR receiver
7
NC
No Connection
2
GND
Ground
8
NC
No Connection
3
+5V_IR
Power supply for IR
9
NC
No Connection
4
IR_R
Red LED indicator
10
KEY1
Menu, Vol+, Vol-
5
IR_G
Green LED indicator
11
KEY0
Source, CH+, CH-, Power
6
GND
Ground
12
GND
Ground
➢J452 (40pin/2.0mm) : LVDS interface(60HZ)
Pin No.
SYMBOL
DESCRIPTION
Pin No.
SYMBOL
DESCRIPTION
1
GND
Ground
21
E2-
RXE2-
2
VCC
Power supply for panel
22
E2+
RXE2+
3
GND
Ground
23
E1-
RXE1-
4
VCC
Power supply for panel
24
E1+
RXE1+
5
NC
No Connection
25
E0-
RXE0-
6
VCC
Power supply for panel
26
E0+
RXE0+
7
GND
Ground
27
O4-
RXO4-
8
VCC
Power supply for panel
28
O4+
RXO4+
9
GND
Ground
29
O3-
RXO3-
10
VCC
Power supply for panel
30
O3+
RXO3+
11
GND
Ground
31
OC-
RXOC-
12
P_PWM
LVDS_CTL
32
OC+
RXOC+
13
GND
GROUND
33
O2-
RXO2-
14
GND
GROUND
34
O2+
RXO2+
NO.
SYMBOL
DESCRIPTION
1
ADJ
The backlight adjustment output pin
2
ON/OFF
Backlight ON/OFF control for panel, ON: +5V; OFF: 0V
3
GND
Ground

© Copyright 2018 TRIUMPH BOARD This document contains confidential information which can be used by the recipient only for servicing the above product.
Reproduction or distribution of any content of this document without permission is strictly forbidden.
17
15
E4-
RXE4-
35
O1-
RXO1-
16
E4+
RXE4+
36
O1+
RXO1+
17
E3-
RXE3-
37
O0-
RXO0-
18
E3+
RXE3+
38
O0+
RXO0+
19
EC-
RXEC-
39
GND
GROUND
20
EC+
RXEC+
40
GND
GROUND
➢J455 (51pin/2.0mm) (60HZ): V-by-One connector
➢J8 (2pin/2.0mm):OPS CTRL interface
Pin No.
Name
Description
Pin No.
Name
Description
1
+
2
GND
Ground

© Copyright 2018 TRIUMPH BOARD This document contains confidential information which can be used by the recipient only for servicing the above product.
Reproduction or distribution of any content of this document without permission is strictly forbidden.
18
➢CON203 & CON201 (2pin/2.0mm, 2pin/2.0mm): Speaker interface
NO.
SYMBOL
DESCRIPTION
1
OUT-_L
Audio Left Channel -
2
OUT+_L
Audio Left Channel +
➢U1004(5pi2.0mm): WIFI interface
NO.
DESCRIPTION
DESCRIPTION
NO.
DESCRIPTION
DESCRIPTION
1
VCC
+5V power Supply
4
DP
USB_D+
2
WIFI-EN
NO Connection
5
GND
GND
3
DM
USB_D-
➢J104 (5pin/2.0mm): I2C interface
Pin No.
Name
Description
Pin No.
Name
Description
1
VCC
3.3V
4
SDA
I2C_SDA
2
GND
GND
5
NC
NO Connection
3
SCL
I2C_SCL
➢J9 (2pin/2.0mm): FAN interface
Pin No.
Name
Description
Pin No.
Name
Description
1
VCC
12V
2
GND
Ground
➢CON11, CON12, CON13, CON15 (5pin/2.0mm):USB interface
Pin No.
Name
Description
Pin No.
Name
Description
1
GND
Ground
4
VCC
5V
2
D+
D+
5
VCC
5V
3
D-
D-
➢J12, J13, J5, J14, J15, J16 (4pin/2.0mm): Touch USB OUT interface
Pin No.
Name
Description
Pin No.
Name
Description
1
GND
Ground
4
D+
D+
2
D-
D-
5
VCC
5V
NO.
SYMBOL
DESCRIPTION
1
OUT-_R
Audio Right Channel -
3
OUT+_R
Audio Right Channel +

© Copyright 2018 TRIUMPH BOARD This document contains confidential information which can be used by the recipient only for servicing the above product.
Reproduction or distribution of any content of this document without permission is strictly forbidden.
19
3.6 OPS Adapter Board
3.6.1 Picture of OPS Adapter Board
Definition of Ports
Pin
Definition
1
OPS control
2
HEADSET OUT
3
USB3.0
4
HDMI OUT
5
USB2.0
6
USB2.0
7
DC 12V

© Copyright 2018 TRIUMPH BOARD This document contains confidential information which can be used by the recipient only for servicing the above product.
Reproduction or distribution of any content of this document without permission is strictly forbidden.
20
4.Disassembly Steps
4.1Tool Preparation
Screw driver, needle-nose pliers, slotted screwdriver (needle-nose pliers and slotted screwdriver are used
in case of any stripped screw or come-off of hexagonal copper pillar).
4.2 Disassembly Procedure
➢Step 1: Remove the rear shell
1）Remove speaker
Take down Φ3×6mm Plating black zinc mechanical screw with meson head (Φ7mm) * 8PCS, release the
speaker bracket and rear shell，and then pull out the cable of speaker;