Tronix 136-024 User manual

View instructions and
technical data also on
our website
Read these instructions & save for future use
Article number
Brand
136-024
Tronix Lighting
Type Ceiling lighting
Contents of this product 1x 6,4W bulkhead 4000K
Technical datasheet Digitally available
on our webshop
Vestibule bulkhead | 6,4W |
rectangular | 4000K | IP65

136-024
Installation
1. Turn off the power and remove the product and associated parts from the packaging.
2. Determine the location for installation and drill holes in the ceiling based on the back of the lamp;
3. Drill a hole at one of the locations indicated on the lamp, then incorporate wiring inside the lamp;
4. Check the complete installation. Should this be in order, you can reactivate the power.
Off
On
This sturdy ceiling lamp features an industrial look and has a waterproof
seal (IP65), making this lamp stand its ground both indoors and outdoors.
The lamp is suitable for placement in various spaces such as offices, living
spaces, schools, hotels and other public areas.
Features
• High quality internal driver with optimal heat dissipation;
•Directly connectable by means of terminal block on the fixture;
• Pleasant, effective color temperature of 4000K;
• Long lifespan of 30,000 hours.
Description

Before getting started with this product, it is advisable to check the order completeness and any damage. If this is the
case, please contact Tronix Lighting.

136-024
The CE mark indicates that this product complies with EU regulations on safety, health and environmental
protection;
The WEEE symbol stands for "Waste Electrical and Electronic Equipment Regulation," a directive on the
collection, recycling and recovery of electronic waste;
The Class I symbol indicates that this product is protected by means of the additional ground cable. This
cable is identified by the yellow/green jacket and is attached to this product.
• This product has an IP65 rating. This means the housing is touch-safe, fully protected from dust and spray-proof
(12.5 L/min) regardless of angle.
Safety
Safety is a top priority at Tronix Lighting. Therefore, we heartily recommend that you follow the following steps closely:
• Keep this manual carefully for future reference;
•Choose a qualified electrician while installing, maintaining or inspecting this product;
• Never look directly into a light source to avoid possible eye damage;
• Ensure that the respective power group is always on non-active when the product is connected;
•Use only recommended combinations (LED drivers, controllers or dimmers) to avoid injury or damage to the product;
•The light source of this light is not replaceable. Because of this, you must replace the entire fixture towards the end
of its lifespan and it is not recommended to open it.
Terms and symbols (as relevant to product)
Technical problems and repair
Should a product not work properly after installation, or if the product exhibits
problems over time, it is advisable to check the following elements:
• Check the wiring and installation of your product;
• Check for the presence of interfering elements such as dust, water or other
electronics;
• If possible, try disconnecting the product and testing it in another location to
rule out a problem at the location;
• Should you be dealing with a WIFI-based product, check and reset your
router's settings.
Should the product still not work after testing, it is recommended to send it in for
inspection and/or repair. To do so, please contact Tronix Lighting using nearby
details and proof of purchase (packing slip).
Supplier:
Tronix Lighting B.V
Vluchtoord 41
5406 XP Uden, Netherlands
[phone]
[email protected]