Tronix PS36 User manual

View instructions and
technical data also on
our website
Read these instructions & save for future use
Article number
Brand Tronix Lighting
Type
Contents of this product
Technical datasheet Digitally available
on our webshop
Pro system modular | Clusterlighting
3m 10,5W clusterlight 3000K
018-318
PS36 | IP65 | transparent |
cluster | 3m | 3000K WW

018-318
Off
On

Installation
Before getting started with this product, it is advisable to check the order completeness and any damage. If this is the
case, please contact Tronix Lighting.
Description
PS230 is a distinctive system within the world of professional LED lighting.
The system contains countless possibilities when it comes to creating your
own lighting design.
Whether decorating a house, restaurant or store, the system is called a
solution for everything!
Features
• IP65 for outdoor use;
• High-quality composition of materials for long life;
• Up to a maximum of 50 meters in one coupling.
2000 mm
1. Turn off the power and remove the product and associated parts from the packaging;
2. Unscrew one or both caps and connect the female connector to the corresponding PS230 plug;
3. Check that the connection is okay and then screw cap back over plug. This ensures a water-resistant seal. When
looping through, please connect the next set to the end of the current set;
4. Check the complete installation. If everything is OK, you can reactivate the power.

018-318
Safety
Safety is a top priority at Tronix Lighting. Therefore, we heartily recommend that you follow the following steps closely:
• Keep this manual carefully for future reference;
•Choose a qualified electrician while installing, maintaining or inspecting this product;
• Never look directly into a light source to avoid possible eye damage;
• Ensure that the respective power group is always on non-active when the product is connected;
• Use only recommended combinations (LED drivers, controllers or dimmers) to avoid injury or damage to the product;
•The light sources of this product is not replaceable. Because of this, you must replace the entire fixture towards the
end of its lifespan and it is not recommended to open it.
The CE mark indicates that this product complies with EU regulations on safety, health and environmental
protection;
The WEEE symbol stands for "Waste Electrical and Electronic Equipment Regulation," a directive on the
collection, recycling and recovery of electronic waste;
The Class II symbol indicates that this product is double insulated;
Technical problems and repair
Should a product not work properly after installation, or if the product exhibits
problems over time, it is advisable to check the following elements:
• Check the wiring and installation of your product;
• Check for the presence of interfering elements such as dust, water or other
electronics;
• If possible, try disconnecting the product and testing it in another location to
rule out a problem at the location;
• Should you be dealing with a WIFI-based product, check and reset your
router's settings.
Should the product still not work after testing, it is recommended to send it in for
inspection and/or repair. To do so, please contact Tronix Lighting using nearby
details and proof of purchase (packing slip).
Supplier:
Tronix Lighting B.V
Vluchtoord 41
5406 XP Uden, Netherlands
[phone]
[email protected]
Terms and symbols (as relevant to product)
• This product has an IP65 rating. This means the housing is touch-safe, fully protected from dust and spray-proof
(12.5 L/min) regardless of angle.