Tronix 175-570 User manual

View instructions and
technical data also on
our website
Read these instructions & save for future use
Article number
Brand
175-570
Tronix Lighting
Type Led luminaires
Contents of this product 1x led spot 5Watt 2700K
Technical datasheet Digitally available
on our webshop
led spot | 50mm | black | 5 watt |
38° | 2700K | dim

175-570
This compact spotlight is the replacement for GU10 spotlights. This spot-
light features stable, flicker-free light combined with a smooth dimming
range. This is made possible by the internal driver, allowing you to make
optimal savings on ceiling space.
Features
• 50mm spotlight replaces standard GU10 light source;
• Stable and flicker-free light;
• Only 26mm high;
• Perfectly dimmable with universal Triac dimmer 215-131.
1. Turn off the power and remove the product and associated parts from the packaging;
2. Open the terminal block by pressing the wings on top of the block. Then pull open the cover and remove the screws;
3. Attach the wiring inside the terminal block and seal it. Then use the screws to mount the block and spotlight in the
chosen location;
4. Check the installation of the spotlight. Activate the power when it is okay to complete the installation.
Off
On
L N
Description
Installation

Before getting started with this product, it is advisable to check the order completeness and any damage. If this is the
case, please contact Tronix Lighting.

175-570
The CE mark indicates that this product complies with EU regulations on safety, health and environmental
protection;
The WEEE symbol stands for "Waste Electrical and Electronic Equipment Regulation," a directive on the
collection, recycling and recovery of electronic waste;
The Class II symbol indicates that this product is double insulated;
Should a product not work properly after installation, or if the product exhibits
problems over time, it is advisable to check the following elements:
• Check the wiring and installation of your product;
• Check for the presence of interfering elements such as dust, water or other
electronics;
• If possible, try disconnecting the product and testing it in another location to
rule out a problem at the location;
• Should you be dealing with a WIFI-based product, check and reset your
router's settings.
Should the product still not work after testing, it is recommended to send it in for
inspection and/or repair. To do so, please contact Tronix Lighting using nearby
details and proof of purchase (packing slip).
Supplier:
Tronix Lighting B.V
Vluchtoord 41
5406 XP Uden, Netherlands
[phone]
[email protected]
Safety
Terms and symbols (as relevant to product)
Technical problems and repair
• The product is rated IP20. This means that the product is resistant to the penetration of solid objects >12.5 mm and
is not resistant to water or moisture.
Safety is a top priority at Tronix Lighting. Therefore, we heartily recommend that you follow the following steps closely:
• Keep this manual carefully for future reference;
•Choose a qualified electrician while installing, maintaining or inspecting this product;
• Never look directly into a light source to avoid possible eye damage;
• Ensure that the respective power group is always on non-active when the product is connected;
• Use only recommended combinations (LED drivers, controllers or dimmers) to avoid injury or damage to the product;
•The light source of this spotlight is not replaceable. Because of this, you must replace the entire fixture towards the
end of its lifespan and it is not recommended to open it;
• Place this spotlight indoors only at a standard room temperature (~25°C).