Trotec TTV 1500 User manual

TRT-BA-TTV1500/TTV3000-TC-003-EN
TTV 1500 / TTV 3000
EN
OPERATING MANUAL
CONVEYING FAN

1 EN
conveying fan TTV 1500 / TTV 3000
Table of contents
Notes regarding the operating manual.................................1
Safety .....................................................................................1
Information about the device................................................3
Transport and storage...........................................................4
Assembly and start-up..........................................................4
Operation ...............................................................................5
Available accessories............................................................5
Errors and faults....................................................................6
Maintenance ..........................................................................6
Technical annex.....................................................................7
Disposal .................................................................................7
Notes regarding the operating manual
Symbols
Warning of electrical voltage
This symbol indicates dangers to the life and health of
persons due to electrical voltage.
Warning
This signal word indicates a hazard with an average
risk level which, if not avoided, can result in serious
injury or death.
Caution
This signal word indicates a hazard with a low risk
level which, if not avoided, can result in minor or
moderate injury.
Note
This signal word indicates important information
(e.g. material damage), but does not indicate hazards.
Info
Information marked with this symbol helps you to carry
out your tasks quickly and safely.
Follow the manual
Information marked with this symbol indicates that the
operating manual must be observed.
Wear hearing protection
Information marked with this symbol indicates that you
should wear hearing protection.
You can download the current version of the operating manual
and the EU declaration of conformity via the following link:
TTV 1500
https://hub.trotec.com/?id=39417
TTV 3000
https://hub.trotec.com/?id=39418
Safety
Read this manual carefully before starting or using the
device. Always store the manual in the immediate vicinity
of the device or its site of use!
Warning
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may
result in electric shock, fire and/ or serious injury.
Save all warnings and instructions for future
reference.
This appliance can be used by children aged from
8years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe
way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and
user maintenance shall not be made by children
without supervision.
• Do not use the device in potentially explosive rooms.
• Do not use the device in aggressive atmosphere.
• Set the device up in an upright and stable position.
• Observe a minimum distance of 3m between walls,
objects and the suction side.
• Let the device dry out after a wet clean. Do not operate it
when wet.
• Do not use the device with wet or damp hands.
• Do not expose the device to directly squirting water.
• Never insert any objects or limbs into the device.
• Do not cover or transport the device during operation.
• Do not sit on the device.

EN 2
conveying fan TTV 1500 / TTV 3000
• This appliance is not a toy! Keep away from children and
animals. Do not leave the device unattended during
operation.
• Check accessories and connection parts for possible
damage prior to every use of the device. Do not use any
defective devices or device parts.
• Ensure that all electric cables outside of the device are
protected from damage (e.g. caused by animals). Never
use the device if electric cables or the power connection
are damaged!
• The electrical connection must correspond to the
specifications in chapter Technical data.
• Insert the mains plug into a properly secured mains
socket.
• Observe the technical data when selecting extensions to
the power cable. Completely unroll the extension cable.
Avoid electrical overload.
• Before carrying out maintenance, care or repair work on
the device, remove the mains plug from the mains socket.
Hold onto the mains plug while doing so.
• Switch the device off and disconnect the power cable from
the mains socket when the device is not in use.
• Do not under any circumstances use the device if you
detect damages on the mains plug or power cable.
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
Defective power cables pose a serious health risk!
• When positioning the device, observe the minimum
distances from walls and other objects as well as the
storage and operating conditions specified in the Technical
data chapter.
• Make sure that the air inlet and outlet are not obstructed.
• Make sure that there are no loose items located in the
immediate surroundings of air inlet and air outlet.
• Improper installation can lead to a fire, electric shock or
severe personal injury.
• The device is provided with an overheating protection
which is activated by overheating of the device (when
exceeding the operating temperature). In such an event the
device switches off automatically.
Intended use
The conveying fan TTV1500/ TTV3000 may be used for
aeration, deaeration, air circulation, dust collection or air
transport whilst adhering to the technical data and the safety
instructions.
The device is designed for aeration and deaeration tasks, for the
generation of a high air exchange rate even in shafts and ducts
and over long distances.
Improper use
The conveying fan TTV1500/ TTV3000 is not suited for the
installation in fluids or on flooded or boggy grounds.
Any unauthorised changes, modifications or alterations to the
device are forbidden.
Personal protective equipment
Wear hearing protection
Wear appropriate hearing protection when working
with the device.
Personnel qualifications
People who use this device must:
• be aware of the dangers that occur when using conveying
fans.
• have read and understood the operating manual, especially
the Safety chapter.
Residual risks
Warning of electrical voltage
Work on the electrical components must only be
carried out by an authorised specialist company!
Warning of electrical voltage
Before any work on the device, remove the mains plug
from the mains socket!
Hold onto the mains plug while pulling the power cable
out of the mains socket.
Warning
Dangers can occur at the device when it is used by
untrained people in an unprofessional or improper way!
Observe the personnel qualifications!
Warning
The device is not a toy and does not belong in the
hands of children.
Warning
Risk of suffocation!
Do not leave the packaging lying around. Children may
use it as a dangerous toy.
Caution
Risk of injury due to parts being whirled up by the
strong air current.
Before switching the device on, make sure that there
are no loose parts (clothing, hair ...) located near the
air inlet or outlet!
Note
Do not use abrasive cleaners or solvents to clean the
device.

3 EN
conveying fan TTV 1500 / TTV 3000
Behaviour in the event of an emergency
1. In an emergency, disconnect the device from the mains
feed-in: Switch the device off and disconnect it from the
mains.
2. Remove persons from the danger area.
3. Do not reconnect a defective device to the mains.
Information about the device
Device description
The conveying fan TTV1500/ TTV3000 was designed for a
high air volume flow.
The high air volume flow and a variety of configuration options
enable its flexible application ranging from humidity regulation
to the transport of fresh air or exhaust air over longer distances.
The device is equipped with bilateral hose connectors allowing
to connect, for instance, an air transport hose to the air inlet and
a dust bag to the air outlet. This makes the conveying fan an
ideal transport fan for far-off connected air conditioning or
heating applications. It thus allows to increase the conveying
distance of warm or cold air.
When the device is not in use, the power cable can be wound
around the air hose connection.
Device depiction
TTV1500
1
2
3
5
4
6
2
TTV3000
1
2
3
4
5
6
2
No. Designation
1 Transport handle
2 Connector for air hose (optional)
3 Air outlet
4 On/off switch
5 Power cable
6 Air inlet

EN 4
conveying fan TTV 1500 / TTV 3000
Transport and storage
Note
If you store or transport the device improperly, the
device may be damaged.
Note the information regarding transport and storage of
the device.
Transport
Before transporting the device, observe the following:
• Switch off the device.
• Hold onto the mains plug while pulling the power cable out
of the mains socket.
• Do not use the power cable to drag the device.
After transporting the device, observe the following:
• Set up the device in an upright position after transport.
Storage
When the device is not being used, observe the following
storage conditions:
• dry and protected from frost and heat
• in an upright position where it is protected from dust and
direct sunlight
• with a cover to protect it from invasive dust, if necessary
• several devices may be stacked on top of one another
Info
Do not take the devices into operation when stacked.
Stacking rules out an efficient usage of the devices.
Assembly and start-up
Scope of delivery
• 1x Device
• 1x Manual
Unpacking the device
1. Open the cardboard box and take the device out.
2. Completely remove the packaging.
3. Fully unwind the power cable. Make sure that the power
cable is not damaged and that you do not damage it during
unwinding.
Assembly
Connecting an air hose/ a dust bag (optional)
1. Depending on the application, pull one or two air hoses(7)
completely over the connectors.
2. When using a dust bag, pull it over the air outlet(3).
3. Fasten the air hoses or the dust bag by means of tension
belts(8).
7
8
Start-up
When positioning the device, observe the minimum distance
from walls or other objects as described in the Technical data
chapter.
A
B
C
C
D
• Before restarting the device, check the condition of the
power cable. If there are doubts as to the sound condition,
contact the customer service.
• Set the device up in an upright and stable position.

5 EN
conveying fan TTV 1500 / TTV 3000
• Make sure the device is only placed on firm, dry and
vibration-free ground.
• When positioning the device, keep a sufficient distance to
heat sources.
• Make sure that the air inlet and outlet are not obstructed.
• Make sure that extension cables are completely unrolled.
Connecting the power cable
• Insert the mains plug into a properly secured mains
socket.
Operation
Operating elements
TTV1500
4 5
TTV3000
5 4
No. Designation
4 On/off switch
5 Power cable
Switching the device on
1. Switch the device on by setting the on/off switch to
positionI.
Shutdown
Warning of electrical voltage
Do not touch the mains plug with wet or damp hands.
1. Switch the device off by setting the on/off switch to
positionO.
2. Hold onto the mains plug while pulling the power cable out
of the socket.
3. Clean the device according to the Maintenance chapter.
4. Store the device according to the Storage chapter.
Available accessories
Warning
Only use accessories and additional equipment
specified in the operating manual.
Using insertion tools or accessories other than those
specified in the operating manual may cause a risk of
injury.
TTV1500
Designation Article number
Air transport hose Tronect SP-T,
length7.6m
6.100.001.200
Dust bag, length 3m 7.160.000.108
Universal tension belt 6.100.001.995
Replacement hose connectors 7.310.000.007
TTV3000
Designation Article number
Air transport hose Tronect SP-T,
length7.6m
6.100.001.205
Dust bag, length 3m 7.160.000.109
Universal tension belt 6.100.001.995
Replacement hose connectors 7.310.000.008

EN 6
conveying fan TTV 1500 / TTV 3000
Errors and faults
The device has been checked for proper functioning several
times during production. If malfunctions occur nonetheless,
check the device according to the following list.
Note
Wait for at least 3 minutes after maintenance and
repair work. Only then switch the device back on.
The fan operates only for a brief period, then switches off:
• Check whether the protective grid at the air inlet is
obstructed in some way. If applicable, remove foreign
objects.
• The motor bearing might be damaged. Please contact the
customer service.
The fan is not running:
• Check whether the device is switched on.
• Check the power connection.
• Check the power cable and mains plug for damages.
• Check the on-site fusing.
Your device still does not operate correctly after these
checks?
Please contact the customer service. If necessary, bring the
device to an authorized specialist electrical company or to
Trotec for repair.
Maintenance
Activities required before starting maintenance
Warning of electrical voltage
Do not touch the mains plug with wet or damp hands.
• Switch the device off.
• Hold onto the mains plug while pulling the power cable out
of the mains socket.
Cleaning the housing
Clean the housing with a soft, damp and lint-free cloth. Make
sure that no moisture enters the housing. Protect electrical
components from moisture. Do not use any aggressive cleaning
agents such as cleaning sprays, solvents, alcohol-based or
abrasive cleaners to dampen the cloth.
Cleaning the fan and device interior
• Check fan and protective grid for perfect condition before
and after each application.
• Clean the fan after each operation.
• Use compressed air to remove particles, lint, dust and dirt
from motor, fan wheel and protective grid. Do not in any
event use a high-pressure cleaner to clean the fan.
• Other than that, the device does not require maintenance.

7 EN
conveying fan TTV 1500 / TTV 3000
Technical annex
Technical data
Parameter Value
Model TTV1500 TTV3000
Article number 1.510.000.006 1.510.000.014
Amount of air 1050 m3/h 3100 m3/h
Air pressure 225 Pa 360 Pa
Voltage 230V/ 50Hz 230V/ 50Hz
Power input 0.17kW 0.73kW
Fusing 10A 10A
Transport medium
temperature
max. 40°C max. 40°C
Hose connector Ø200mm Ø300mm
Hose length max.15m max.38m
Sound level
(3m distance)
71dB(A) 77dB(A)
Dimensions (L x W x H) 348x 285x
324mm
470x 390x
460mm
Minimum distance to
walls and other objects
top (A):
rear/ suction side(B):
sides (C):
front (D):
0.5m
3.0m
0.5m
0.5m
0.5m
3.0m
0.5m
0.5m
Weight 8 kg 17 kg
Disposal
The icon with the crossed-out waste bin on waste
electrical or electronic equipment stipulates that this equipment
must not be disposed of with the household waste at the end of
its life. You will find collection points for free return of waste
electrical and electronic equipment in your vicinity. The
addresses can be obtained from your municipality or local
administration. For further return options provided by us please
refer to our website www.trotec24.com.
The separate collection of waste electrical and electronic
equipment aims to enable the re-use, recycling and other forms
of recovery of waste equipment as well as to prevent negative
effects for the environment and human health caused by the
disposal of hazardous substances potentially contained in the
equipment.


Trotec GmbH & Co. KG
Grebbener Str. 7
D-52525 Heinsberg
+49 2452 962-400
+49 2452 962-200
www.trotec.com
Other manuals for TTV 1500
1
This manual suits for next models
1
Table of contents
Other Trotec Fan manuals

Trotec
Trotec TVE 31 T User manual

Trotec
Trotec TVE 24 S User manual

Trotec
Trotec TVM 11 User manual

Trotec
Trotec TFV 30 S User manual

Trotec
Trotec TVE 16 User manual

Trotec
Trotec TVE10 User manual

Trotec
Trotec TFV10S User manual

Trotec
Trotec TVE 1 User manual

Trotec
Trotec TVE 40 T User manual

Trotec
Trotec TVE 26 S User manual

Trotec
Trotec TVE 8 User manual

Trotec
Trotec TFV PRO 1 User manual

Trotec
Trotec TVE 39 T User manual

Trotec
Trotec TVE 9 User manual

Trotec
Trotec TTV 7000 User manual

Trotec
Trotec TVM 11 User manual

Trotec
Trotec TTV 4500 User manual

Trotec
Trotec TTW 25000 S User manual

Trotec
Trotec TFV PRO 1 User manual

Trotec
Trotec TFV 10 S User manual