True North TNT 2MAN MENTOR User manual

11052019
1
WARNING! This product carries strict weight limitations. Do not use this product if you exceed this total weight limitation. Please note this weight limit
includes the user and equipment. Failure to follow these instructions may result in serious injury or death!
Your full-body fall arrest harness included with your new True North Treestands Inc. treestand has a service life of three (3) years past its date of manufacture. This date of manufacture
can be found on the sewn on label of each component of the fall arrest system. Replace this harness if the service life has expired. Should you experience a fall while wearing your
full body fall arrest harness return it to the manufacturer for free replacement. You must read the full-body fall arrest harness instruction manual in it’s entirety prior to attempting
to use this True North Treestands Inc. product(s) in any manner.
WARNING! You must use the full-body fall arrest harness which meets or exceeds industry standards recognized by the TMA (Treestand Manufacturer’s
Association) and has been provided with this True North Treestands Inc. product(s) or an aftermarket full-body fall arrest harness which meets or exceeds
industry standards recognized by the TMA when installing, removing or using this True North Treestands Inc. product(s). Failure to follow these instructions
may result in serious injury or death!
Model Number: True North Treestands Inc. TNT 2Man Mentor Hang-On Treestand w/ Quick Hitch
Maximum Weight Capacity: 500 lbs/228 kg (*User and Equipment)
*No Single Occupant May Exceed 300 pounds or 136 kg
Thank you for your purchase of this quality True North Treestands Inc. product! To ensure your personal safety, please take a moment to carefully read this product instruc-
tion manual in its entirety before attempting to set-up, install and/or otherwise use this True North Treestands Inc. product. Failure to do so could result in serious
personal injury or death! This True North Treestands Inc. product has been designed, engineered and manufactured to provide you with years of trouble free service.
TRUE NORTH TREESTANDS INC.
TNT 2MAN MENTOR HANG-ON
INSTRUCTION MANUAL
Should you have any questions about the installation and/or use of this product, or any other True North Treestands Inc. product(s) do not hesitate
to call one of our customer service representatives at [phone] or visit us online at hunttnt.com. Our service representatives will answer any
questions you may have about any of the complete line of True North Treestands Inc. products.

11052019
2
ATTENTION!!
WHEN YOU SEE A “WARNING!” BE SURE TO HEED THE MESSAGE! THE INFORMATION CONTAINED IN THESE MESSAGES CAN
SAVE YOUR LIFE!!
WARNING! Falls from a treestand can occur anytime after leaving the ground. These falls result in either serious injury or death! For your personal safety, please
take a moment to carefully read this product instruction manual in its entirety before attempting to assemble, set-up, install and/or otherwise use this True North
Treestands Inc. product. At least annually, review the contents of this instruction manual and watch the safety information included in the Quick Response (QR)
Code(s) which accompanies this True North Treestands Inc. product(s). Additionally, keep these instructions for the entire duration that you own this product(s).
Failure to follow these instructions may result in serious injury or death!
WARNING! The safe use and operation of this product is the sole responsibility of the user. It is also the sole responsibility of the owner to provide any person(s)
who borrow or purchase this product with these instructions. Failure to follow these instructions may result in serious injury or death! Additionally, failure to fol-
low these instructions may subject you to personal liability penalties as determined by the Canadian Judicial system or other legal system with jurisdictional
authority.
WARNING! Prior to each hunt, make sure that you have a signaling device (e.g., mobile phone, cell phone, radio, whistle, signal are, Personal Locator Device
[PLD], etc.) in your possession and on your person in an operable condition. This device must be within easy access should you experience the need to contact
emergency assistance. Failure to follow these instructions may result in serious injury or death!
WARNING! Failure to read and strictly comply with the instructions contained in this Instruction Manual may result in serious injury or death!
PLEASE NOTE THAT “WARNING!” statements have been placed throughout this Instruction Manual. These statements point out important safety information and
instructions, which, if not followed, could endanger the personal safety and/or property of the operator. It is imperative that the operator of this product, or any
other True North Treestands Inc. product(s) read and understand all the instructions and warnings contained in this Instruction Manual prior to attempting to
use this product(s), or any other True North Treestands Inc. product(s). Failure to comply with these instructions and/or warnings may result in serious injury or
death! When you see a “WARNING!” statement - BE SURE TO HEED THE MESSAGE!
WARNING! Thoroughly inspect this or any other True North Treestands Inc. product(s) prior to each use for signs of wear, damage, rot, corrosion, deterioration
and/or any other type of defect. DO NOT expose this product to extended exposure to direct sunlight, excessive heat and/or freezing temperatures. Do not use
this or any other True North Treestands Inc. product(s) if they show evidence of wear, rot, corrosion, cracks, deterioration and/or any other type(s) of defect(s).
Failure to follow these instructions may result in serious injury or death!
WARNING! Do not remove, modify and/or omit any portion or otherwise mechanically modify this True North Treestands Inc. product or its assemblies in any
manner. Modification, misuse and/or part substitution shall immediately void your factory warranty and may result in serious injury or death! If you suspect
that a part(s) is (are) missing and/or defective, immediately contact True North Treestands Inc. at [phone] for replacement of missing or defective parts.
Never modify your stand in any way by making repairs, or altering, adding or attaching anything to it except if explicitly authorized in writing by True North
Treestands Inc.. ALWAYS USE GENUINE FACTORY AUTHORIZED True North Treestands Inc. REPLACEMENT PARTS. USE OF ANY REPLACEMENT PARTS OTHER THAN
GENUINE True North Treestands Inc. PARTS VOIDS YOUR WARRANTY AND MAY RESULT IN SERIOUS INJURY OR DEATH!
WARNING! This True North Treestands Inc. product is designed for adult use only. No one under the age of 16 shall attempt to use this or any other True North
Treestands Inc. product(s) without direct adult supervision. Failure to follow these instructions may result in serious injury or death!
WARNING! Prior to attempting to use this or any other True North Treestands Inc. product(s) you must take the time and become familiar with its assembly,
setup, installation and removal. You must practice installing, setting-up, using and removing this productat ground-level prior to attempting to use it at heights
above ground-level. Once you have become thoroughly knowledgeable and comfortable with this True North Treestands Inc. product set-up, installation, use
and removal at ground-level, only then are you ready to use it at heights above ground-level. Failure to follow these instructions may result in serious injury and
death!
WARNING! When hunting from a treestand, falls can occur any time after leaving the ground causing injury or death. Always wear your full-body fall arrest system
(which meets or exceeds industry standards recognized by the TMA), comprising a full-body harness, tether, tree belt, linesman belt and Suspension Relief Device
at all times after leaving the ground. You must stay connected to the tree at all times after leaving the ground. Single safety belts and chest harnesses are no
longer allowed and shall never be used as they put the user at serious risk of injury or death. If you are not wearing your full-body fall arrest harness that is
properly attached to the tree that is protecting you from a fall, do not leave the ground. Failure to follow these instructions may result in serious injury or death!
WARNING! Never rely on a tree branch for support while climbing. Failure to follow these instructions may result in serious injury or death!
WARNING! You must always inform someone of your hunting location, where thetreestand will be located and theexpected duration of the hunt. Failure to follow
these instructions may result in serious injury or death!
WARNING! Inspect all safety devices each time before each use. DO NOT use these devices if they shows signs of wear, damage (from freezing, excessive heat,
etc.), deterioration or vandalism. Factors such as tree growth, vandals, weather and animals may affect the performance of an unattended tree stand. Do not
store these devices outdoors when not in use. Failure to follow these instructions may result in serious injury or death!
WARNING! The length of the full-body fall arrest tether must be minimized at all times. It shall be adjusted so that it is above the head with no slack (snug) in the
sitting position and you shall have the minimum amount of slack possible when climbing. Failure to follow these instructions may result in serious injury or death!

11052019
3
ATTENTION!!
WHEN YOU SEE A “WARNING!” BE SURE TO HEED THE MESSAGE! THE INFORMATION CONTAINED IN THESE MESSAGES CAN
SAVE YOUR LIFE!!
You Must Stay
Connected While Using This
Product!
WARNING! Practice the use your full-body fall arrest harness at ground-level in the presence of a responsible adult to experience the feeling of hanging suspended
before using in a hunting environment. Failure to follow these instructions may result in serious injury or death!
WARNING! Failure to follow the full-body fall arrest harness instructions could result in not being able to return to the stand and being suspended in a harness
after a fall. If your hunting location is unknown by anyone and communication efforts are unsuccessful, you must have a personal plan for self-recovery/escape
should you experience a fall. Prolonged suspension in a harness can be fatal. It is important to exercise the legs by pushing against the tree or doing other forms
of continuous leg exercises to avoid blood pooling while being suspended. Varying degrees of physical fitness may require different plans for self-recovery/
escape to avoid the effects of prolonged suspension. Have a personal plan and practice it in the presence of a responsible adult before leaving the ground. No
one escape/rescue plan will work for every hunter, on every tree, in every circumstance. Only you can determine the best self-recovery/escape plan for your
hunting situation and you must have a self-recovery/escape plan for your individual situation before leaving the ground. There is time to make a correct decision
on what action to take if a fall occurs while wearing a full-body fall arrest harness. It is important to remember, “DO NOT PANIC.” You must only hunt from the
ground when a suitable self-recovery/escape plan is absent. Failure to follow these instructions may result in serious injury or death!
Several optional products/systems are available that offer self-recovery or self extraction from a fall when suspended in a harness. Some systems automatically
descend the user while others allow user control. One of these products/systems can be considered for use as an additional safety precaution against prolonged
suspension and suspension trauma. Be sure to follow the manufacturer’s directions on the safe use of these products/systems.
WARNING! A suspension relief device must be on your person and readily accessible while using your full-body fall arrest harness. These devices allow the user
to relieve the load on the lower extremities if suspended in a harness and help maintain circulation in the legs, mitigate suspension trauma (blood pooling) or
allow descent to the ground. Be sure to follow the directions on the safe use of any suspension relief device. Failure to follow these instructions may result in
serious injury or death!
WARNING! If you have a limiting physical and/or health condition that precludes and/or renders you incapable of self-recovery and/or a suitable escape plan
is not available, DO NOT hunt from heights above ground-level. Failure to follow these instructions may result in serious injury or death!
WARNING! NEVER allow the full-body fall arrest harness lanyard to get under your chin and/or around your neck. This poses a
choking hazard that can lead to serious injury or death. Failure to follow these instructions may result in serious injury or death
WARNING! Never attempt to climb up or climb down with a weapon and/or gear in your possession. ALWAYS unload your
weapon and pull it up to hunting height using a tether or pull-up (hoisting) rope. ALWAYS lower your unloaded weapon down
to the ground prior to attempting to climb down the tree (when raising or lowering firearms, the chamber must be open and
the barrel pointing toward the ground). Use this same method when raising or lowering all other gear. Failure to follow these
instructions may result in serious injury or death!
WARNING! DO NOT attempt to use this and/or any other True North Treestand Inc. product(s) when ice, snow and/or freezing
rain has deposited or formed on any portion of the tree you intend to climb. Failure to follow these instructions may result in
serious injury or death!
WARNING! ALWAYS maintain three-point contact when climbing up/down a tree when using climbing aids (e.g., stick ladders,
sectional ladders, steps, etc.). Proper three-point contact means having either two (2) feet with one (1) hand or one (1) foot
with two (2) hands on the step portion of the climbing aids at all times when climbing up or down. Failure to follow these
instructions may result in serious injury or death!
WARNING! DO NOT modify, fix/repair, alter, bend, cut, weld, drill or heat this product in any way. Failure to follow
these instructions will void warranty and may result in serious injury or death!
WARNING! DO NOT lean out from a treestand for any reason. Never use your full-body fall arrest harness to help you lean
out of your treestand. Failure to follow these instructions may result in serious injury or death!
WARNING! DO NOT use this or any other True North Treestand Inc. product(s) if you have a history of heart problems, back
problems, impaired vision, joints that lock-up, spinal fusions, equilibrium problems, high blood pressure, are not well-
rested and/or any other physical impairment that may limit your ability to use and/or operate this product in the safe
manner outlined in this Instruction Manual. Additionally, do not use this or any other True North Treestand Inc. product(s) if
you are currently taking any medication (including prescription) and/or using and/or consuming any substance, including
alcohol, that may limit your ability to use this True North Treestand Inc. product as outlined and described in this Instruction
Manual. Never use a treestand when feeling ill, nauseous or dizzy. Failure to follow these instructions may result in serious injury or death!
WARNING! DO NOT attempt to use this or any other True North Treestand Inc. product(s) when thunderstorms are threatening and/or present within five (5) miles.
Do not attempt to use this or any other True North Treestand Inc. product(s) when any other adverse weather condition(s) presents itself. These include weather
conditions which have the potential for producing winds, lightning, rain, snow, sleet and/or any other atmospheric condition which may limit the user’s ability
to operate this True North Treestand Inc. product in a safe manner as described in this Instruction Manual. Should inclement weather conditions arise during your
use of this True North Treestand Inc. product, return to the ground immediately. Failure to follow these instructions may result in serious injury and death!
WARNING! Never jump or bounce on a treestand to seat it to the tree. Failure to follow these instructions may result in serious injury or death!

11052019
4
ATTENTION!!
WHEN YOU SEE A “WARNING!” BE SURE TO HEED THE MESSAGE! THE INFORMATION CONTAINED IN THESE MESSAGES CAN
SAVE YOUR LIFE!!
WARNING! DO NOT use this product, or attempt to use a treestand, on a dead, leaning, diseased, loose barked tree (bark that flakes or falls off), irregular
shaped trees or utility poles. DO NOT use this product on any tree that does not allow for a level standing platform. Failure to follow these instructions may
result in serious injury or death!
WARNING! Hunting and especially hunting from an elevated position shall not be attempted by someone who is not in great physical shape or who has a history of skeletal
or medical conditions of any kind. This warning is not to be discounted. There are many hunting alternatives that do not require the physical exertion and the stamina
of hunting from an elevated position. The user assumes all risks of injury in the use of our product. If at any time you feel uncomfortable using our products, hunting at
an elevated position or your health condition changes, discontinue the use of our products immediately and return to the ground. Failure to follow these instructions will
result in serious injury or death!
WARNING! You must use the linesman belt when installing hang-on style stands to stabilize yourself. Failure
to follow these instructions may result in serious injury or death!
WARNING! Correct tightening and adjustments of all connection hardware is critical to stable hang-
on treestand installation. Make certain your treestand is installed in accordance with the
Manufacturer’s Instructions. Failure to follow these instructions may result in serious injury or death!
WARNING! Practice the attachment of hang-on treestands at ground-level before using in a
hunting environment. Failure to follow these instructions may result in serious injury or death!
WARNING! Climbing aids (e.g. climbing sticks, sectional ladders, steps, etc.) must extend above the
treestand standing platform (at least 24” inches [61 cm]) to allow the user to step down onto the platform.
Never step up to your stand from a climbing aid. Failure to follow these instructions may result in serious
injury or death!
WARNING! Never leave a treestand in a tree for more than two (2) weeks (14 days) as weather and/
or animals can cause damage. Tree growth can also stress and/or damage straps, chains, ropes, cams
and buckles. Failure to follow these instructions may result in serious injury or death!
WARNING! Use a pull-up (hoisting) rope to raise and lower the treestand. Never climb with anything
on your back. Failure to follow these instructions may result in serious injury or death!
WARNING! ALWAYS have a second adult present when installing/removing or using a treestand.
The ability to get help quickly may save your life in the event of a fall. Good non-slip safety
bootsare important for your safety. Be especially careful that bootlaces do not get hooked on the
treestand or climbing aids (tuck laces into bootsbefore climbing). Failure to follow these instructions
may result in serious injury or death!
WARNING! BEFORE each use, make sure all nuts and carriage bolts are secure. CHECK all hardware
and ropes prior to every use to make sure no damage has occurred to hardware and the ropes are
not cut or frayed. Keep rope from coming into contact with any sharp edges. DO NOT USE THIS
PRODUCT IF ANY DAMAGE IS SUSPECTED. Failure to follow these instructions may result in serious
injury or death!
WARNING! DO NOT stand on the treestand seat. Failure to follow these instructions may result in serious
injury or death!
WARNING! When using a lineman belt to ascend/descend the tree, the full-body fall arrest harness tree belt
and lanyard must be attached to the tree trunk before stepping down onto the treestand. Failure to follow
these instructions may result in serious injury or death!
WARNING! REPLACE any damaged or warn part with original parts. Store ina dry, cool, safe place away
from sunlight. Failure to follow these instructions may result in serious injury or death!
WARNING! Always lean forward as you climb and attach your full-body fall arrest harness tree belt to the
tree trunk before securing the platform to the tree and stepping onto the platform. Failure to follow these
instructions may result in serious injury or death!
WARNING! Check the ground under your climbing systems to make sure it is firm and level. Failure to follow
these instructions may result in serious injury or death!
WARNING! DO NOT attempt to make adjustments to this product or your treestand while at heights above
ground-level. All adjustments must be made with the entire treestand on the ground. Failure to follow these
instructions may result in serious injury or death!
SPECIAL CONSIDERATIONS FOR NON-CLIMBING (HANG-ON) TREESTAND USAGE
Prior to stepping onto or off of the treestand platform,
you must attach your full-body fall arrest harness tether/
lanyard to the tree trunk as shown to preclude you from
being unattached.
Minimum of 24” (61 cm)
Climbing system installed a minimum
of 24” above standing platform

11052019
5
FULL-BODY FALL ARREST HARNESS SYSTEM INSTRUCTIONS
STEP 1. Identify the main parts of the full-body fall arrest harness as depicted in Figure 1. Hold the full-body fall arrest harness by the tether loop insuring
the harness is upright and leg straps are hanging down as depicted in Figure 2. Straighten any straps which may have become twisted. With the leg loops
hanging at the bottom, step into each leg loop while holding the shoulder straps as shown in Figure 2.
Figure 1
Full-Body Fall Arrest Harness (Front and Rear Views)
Shoulder Strap (R)
Shoulder Strap (L)
Tether
Tether Loop
Waist Belt
Waist Belt Buckle
Leg Loop (L)
Leg Loop Buckle (L)
Leg Loop (R)
Leg Loop Buckle (R)
Suspension Relief Device
Tree Belt
Lineman Belt (two sides)
Lineman Belt Loops (L & R)
1
8
10
9
3
2
12
7
4
5
11
6
1
10
9
3
212
7
4
5
11 6
1
9
3
2
7
4
5
8
Figure 5
Wrap Waist Belt
Figure 4
Full-Body Fall Arrest
Figure 3
Slip Right Arm Into
Figure 2
Step Into Leg Loops
13
13
14 14
14
Buckle
Strap
Long
Strap
WARNING! Read these True North Treestands Inc. full-body fall arrest harness instructions carefully and follow all the instructions! Your new full-body fall
arrest harness is designed for a maximum capacity(user and equipment ) of 300 pounds (136 kg). Additionally, your new full-body fall arrest harness
must be replaced after three (3) years of service! Replace your full-body fall arrest harness immediately should you experience a fall while wearing it.
Failure to follow these instructions may result in serious injury or death!
WARNING! Falls from treestands can occur without warning. Product failures, falling asleep, misuse, vandalism, animal damage, etc. can lead to falls. However
unlikely, falls from heights to the ground below can be eliminated by using the full-body fall arrest harness system which was provided with this product. You must
use this (or aftermarket equivalent) full-body fall arrest harness system, as outlined herein, at all times when using your True North Treestands Inc. treestand product.
Failure to follow these instructions will result in serious injury or death!
WARNING! Use the True North Treestands Inc. full-body fall arrest harness provided with this product or a harness which meets or exceeds industry standards recognized
by the TMA. NOTE: You must store your full-body fall arrest harness out of direct sunlight and out of any other harsh environmental condition(s) that may adversely
affect its performance. Failure to follow these instructions may result in serious injury or death!
WARNING! It may be necessary to purchase an aftermarket full-body fall arrest harness which meets or exceeds industry standards recognized by the TMA should the
True North Treestands Inc. full-body fall arrest harness provided with this product(s) not be sufciently large enough. Remember: never exceed the weight capacity of
this product(s). Failure to follow these instructions may result in serious injury or death!

11052019
6
Figure 6
Thread Waist Buckle
STEP 2. With both left and right legs in the leg loops, slip your right arm through the right shoulder strap as shown in Figure 3. With your right arm in the
right shoulder strap, repeat this STEP for your left arm. The full-body fall arrest harness shall now be hanging loosely about your torso as shown in Figure
4.
STEP 3: Locate the waist belt and waist belt buckle as shown in Figure 1. Wrap the waist belt around your waist as shown in Figure 5. Thread the buckle
as shown in Figure 6. Extreme care must be taken to thread the waist buckle as depicted in Figure 6. Tighten the waist buckle until the waist belt is snug.
DO NOT overtighten as this may become very uncomfortable and potentially cut-off your circulation.
WARNING! DO NOT overtighten the waist belt as this may cut-off circulation and cause an unsafe condition. Failure to follow these instructions may
result in serious injury or death!
STEP 4: With the waist belt comfortably snug, locate the two (2) leg loop buckles as shown in Figure 1. Adjust both leg loop buckles so the leg loops are
positioned snugly in the groin area as shown in Figure 7. Tighten the leg loops so they are snug, however, not overly tight. Overtightening of the leg loops
will restrict circulation to the legs and cause an unsafe condition.
WARNING! DO NOT overtighten the leg loops as this may cut-off circulation and cause an unsafe condition. Failure to follow these instructions
may result in serious injury or death!
STEP 5: With the leg loops tightened to a comfortable t and the waist belt adjusted snugly, your full-body fall arrest harness shall now be donned as shown
in Figure 8.
1
3
2
456
Figure 7
Tighten Leg Loops/Positioned
Figure 8
Full-Body Fall Arrest Harness Donned Correctly

11052019
7
FULL-BODY FALL ARREST HARNESS SYSTEM INSTRUCTIONS (TREE BELT)
WARNING! YOU MUST thread the tree belt buckle as shown in Figure 11. Failure to thread the buckle as shown will result in the belt failing to hold
and separation from the tree trunk. Failure to follow these instructions may result in serious injury or death!
6
Figure 11
Threading Tree Belt Buckle
Figure 13
Full-Body Fall Arrest Harness
Figure 12
Full-Body Fall Arrest Harness
STEP 3: With the full-body fall arrest harness tree belt
and tether installed as outlined previously, adjust the
height of the tree belt so it is taunt as shown in Figures
12 and 13. Please note, the tether length will vary
de-pending on whether or not you plan on standing
or sitting during your use of this True North Treestands
Inc. product. You must keep the tether length as short
as possible at all times to minimize the distance you
might fall in the unlikely event you experience a fall
while using this True North Treestands Inc. product.
13
2
4
56
Figure 9
Insert Tree Belt Through
Full-Body Fall Arrest Harness Tether Loop Figure 10
Wrap Tree Belt Around
Tree Trunk
STEP 1: Once you have reached your desired height, insert the tree
belt (refer to Figure 1 for identication) through the loop of the
full-body fall arrest harness tether loop as shown in Figure 9. Wrap
the tree belt around the tree at a height that allows just enough
slack for you to sit comfortably in your stand (as shown in Figure
10). NOTE: Keeping the full-body fall arrest harness tether as short
as possible limits the distance you will travel in the unlikely event
you should experience a fall.
STEP 2: Secure the tree belt by inserting the tag (free-end) end
through the slot in the buckle closest to opposite end of the tree
belt, then cross over the sliding mechanism and back down through
opposite slot. Pull on tree belt to secure and test to make sure
sliding mechanism engages, creating secure tree belt placement.
Refer to Figure 11 for proper tree belt buckle threading.

11052019
8
13
2
4
56
FULL-BODY FALL ARREST HARNESS SYSTEM (LINEMAN BELT)
Figure 14
Threading Lineman Belt Buckle
A lineman belt has been included with your new True North Treestands Inc. to help insure your utmost safety while installing,
using, operating and/or removing your treestand. Your use of it as outlined here and elsewhere in this Instruction Manual is
crucial to its safe operation and the safe operation of your True North Treestands Inc. treestand.
When using hang-on style stands, it is necessary to use a full-body fall arrest harness lineman belt. These lineman belts keep
you safely attached to the tree while installing, using, operating and/or removing your hang-on style treestand.
WARNING! You must wear and properly use the full-body fall arrest lineman belt which is provided with this True North
Treestands Inc. treestand. Failure to follow these instructions will result in serious injury or death!
STEP 1: Locate the full-body fall arrest harness lineman belt (refer to Figure 1). Please note, the lineman belt is a two-piece
design. One side short, with a sewn-loop tag-end and buckle (“buckle strap”). The other side, a long strap with a tag-end and
sewn-loop end (“long strap”). With your full-body fall arrest harness donned as previously outlined in this Instruction Manual,
slip the sewn-loop end of the buckle strap through the lineman belt loop (refer to Figure 1) on either the left or right side of the
harness. If you are right handed, it is recommended you install the buckle strap on your right side. And vice versa if left-handed.
This allows for ease-of-adjustment when climbing.
STEP 2: With the buckle strap installed, repeat STEP 1 for the long strap side on the OPPOSITE lineman belt loop.
STEP 3: Make certain both sides are cinched down tightly to the lineman belt loops.
WARNING! Both sides of the lineman belt must be tightly cinched down to the lineman belt loops. Failure to do so will
cause slippage leading to an unsafe condition. Failure to follow these instructions will result in serious injury or death!
STEP 4: When ready to climb to your treestand installation height, wrap the long strap around the tree trunk, threading
it into the buckle strap as shown in Figure 14.
STEP 5: Adjust the lineman belt so it is a comfortable length while attached to the tree trunk by lengthening or shortening the tag-end of the long strap.
Lineman Belt Donned
WARNING! A lineman belt that meets or exceeds industry standards recognized by the TMA (Treestand
Manu-facturer’s Association) standards has been provided with this True North Treestands Inc. product. You
must wear/use it when installing, removing or using this True North Treestands Inc. product. Failure to follow
these instructions may result in serious injury or death!
You Must Stayed
Connected While Using
This Product!

11052019
9
FULL-BODY HARNESS SYSTEM INSTRUCTIONS (SUSPENSION RELIEF DEVICE)
No one plans to fall from their treestand, however, falls can and do occur without warning. It is important to know what to do in the unlikely event
you experience a fall from an elevated hunting position. It is also very important that you practice your escape plan at ground-level prior to entering an
elevated hunting platform. There is time to make a correct decision on what action to take if a fall occurs while wearing a full-body fall arrest harness. It is
important not to panic. Remain calm and implement your practiced rescue, relief and recovery plan.
A Suspension Relief Device, or SRD, has been provided with this True North Treestands Inc. product. It is provided to help relieve the pressure on your lower
extremities in the unlikely event you experience a fall from an elevated hunting position.
WARNING! A suspension relief device must be on your person and readily accessible while using a full-body fall arrest harness. These devices will
allow you to relieve the load on the lower extremities if suspended in a full-body fall arrest harness and help maintain circulation in the legs and
mitigate (minimize) suspension trauma (blood pooling) or allow descent to the ground. Follow all instructions below regarding the provided SRD
(Suspension Relief Device) Failure to follow full-body fall arrest harness instructions could result in not being able to return to the stand and being
suspended in a full-body fall arrest harness after a fall. Failure to follow this warning may result in serious injury or death!
Suspension Relief Device (SRD) Operation
1Deploy SRD
4Standing in Loop 3Ready for Use
2Adjust Loop
STEP 1: After a fall, take a moment to catch your breath and stay calm. Remain calm and do not panic.
STEP 2: Pull out the SRD strap located on the waist belt of your full-body fall arrest harness.
STEP 3: Adjust the SRD strap so you are able to step into the loop and then stand up, placing your weight in the standing loop and relieving the pressure on
your lower extremities. The loop size can be adjusted by moving the buckle up or down (refer to the Figure below for SRD operation).
STEP 4: If you are able to reach your ladder or climbing system, use it to get back into your secured treestand and then carefully climb down to ground-level.
If you are not able to reach your stand, remain calm and continue to stand in the SRD loop and use your personal locating device or cell phone to call for
help.
Important Note Regarding Self Extractors
Several optional products/systems are available that offer self-recovery or self-extraction from a fall when suspended in a full-body fall arrest harness.
Some systems automatically descend the user while others allow user control. One of these products/systems can be considered for use as an additional
safety precaution against prolonged suspension and suspension trauma. Be sure to follow the manufacturers’ directions on the safe use of these prod-
ucts/systems.

11052019
10
TRUE NORTH TREESTANDS MENTOR w/ QUICK HITCH COMPONENTS
Figure 15
Components of the True North Treestand Mentor w/ Quick Hitch
(Not shown to scale)
A
B
C
G
F
H
N
JK
M
D
E
A Standing Platform G (3) Quick Hitch Receiver Ratchet Straps* M Standing Platform Ratchet Strap
B Seats H Leveling Stem N (2) Shoulder Straps
C Standing Platform Cables (2) I Leveling Stem Receiver O Hoist Assembly**
D Standing Platform Ratchet Strap Receivers (2) J Leveling Stem Locking Pin P Upright Ratchet Strap
E Quick Hitch Hook K (2) Arm Rests
F (3) Quick Hitch Receiver*** L (2) Entry Assist Steps
I
*Two (2) extra Quick Hitch Receivers and Quick Hitch Receiver Ratchet Straps are provided for installation at secondary locations.
** Your True North Treestands Inc. Hoist Assembly has been provided to hoist your True North Treestands Inc. Mentor up to installation height and down during removal.
DO NOT USE your hoist for any other purpose as this may result in an unsafe condition and lead to serious injury or death!
P
O
L

11052019
11
TRUE NORTH TREESTANDS MENTOR ASSEMBLY
Figure 16
Components of the True North Treestand TNT Mentor w/ Quick Hitch Hardware Pack
(Not shown to scale)
Prior to installing your True North Treestands Inc. Mentor treestand, some minor assembly is required.
STEP 1: Locate the adjustable leveling stem and the adjustable leveling stem locking pin. Insert the adjustable leveling stem into the adjustable leveling
stem receiver as shown in Figure 17. Lock in place using the adjustable leveling stem locking pin as shown in Figure 18. NOTE: You will adjust this stem in
and out to adjust the angle of the standing platform during treestand installation.
STEP 2: NOTE: This shoulder strap installation is optional. Locate the two (2) shoulder straps. Install the shoulder straps onto the standing platform as
shown in Figure 19.
STEP 3: NOTE: This adjustment of the seat fabric tension is optional. Locate the provided Allen wrench. Adjust the tension of the seat fabric by loosening or
tightening the Allen bolt located on the end of the seating platform bar as shown in Figure 20.
A (4) 5/16” x 2” w/ (2) nylon washers & (1) 3/16” spacer and locknut
B (4) 5/16” x 2 1/4” w/ (2) nylon washers
A B
Figure 20
Adjust Seat Fabric Tension
Figure 19
Install Shoulder Straps
Figure 18
Secure Adjustable Leveling Stem w/ Adjustable Leveling Stem
Locking Pin
Figure 17
Install Adjustable Leveling Stem Into
Receiver

11052019
12
STEP 1: Locate the two (2) arm rests and the four (4) 5/16” x 2” bolts with two (2) nylon washers, one (1) 3/16” black spacer, and one (1) locknut each
(refer to “A” in Figure 16 for bolt identication). Install one (1) arm rest onto the two (2) holes on the side of the lower seat portion of the seat assembly
using two (2) 5/16” x 2” bolts, two (2) nylon washers, one (1) 3/16” black spacer per arm rest as shown in Figure 21. NOTE: The 3/16” black spacer should
be placed between the arm rest and the seating platform. Repeat this STEP for the opposite arm rest installation.
STEP 2: Locate the two (2) entry assist steps and the four (4) 5/16” x 2 ¼” bolts with two (2) nylon washers and one (1) locknut each (“B” in Figure 16).
Install one (1) entry assist step onto the two (2) holes on the rear of the standing platform on the INSIDE using two (2) 5/16” x 2 ¼” bolts with two (2)
nylon washers and one (1) locknut as shown in Figure 22. NOTE: The nylon washers should be placed to preclude metal to metal contact between the entry
assist step and the standing platform. Repeat this STEP for the opposite entry assist step installation.
TRUE NORTH TREESTANDS MENTOR ASSEMBLY (CON.T)
Figure 22
Install Entry Assist Steps
On INSIDE of Standing Platform
Figure 21
Install Arm Rests
TRUE NORTH TREESTANDS MENTOR w/ QUICK HITCH INSTALLATION
WARNING! Prior to installing your True North Treestands Inc. hang-on treestand, you must install aclimbing system (i.e., climbing
sticks, ladders, sectionals, etc.) which meets or exceeds industry standards recognized by the TMA. Failure to follow these instructions
may result in serious injury or death!
WARNING! Prior to attempting to use this or any other True North Treestands Inc. product(s) you must take a moment and become
familiar with it’s setup and installation at ground-level. You must practice installing, setting-up, removing, and using this product at
ground-level prior to attempting to use it at heights above ground-level. Once you have become thoroughly knowledgeable and
comfortable with this True North Treestands Inc. product setup, installation, removal, and use at ground-level, you’re now ready to use
it at heights above ground-level. Failure to follow these instructions may result in serious injury or death!
WARNING! STOP NOW! Make sureyou are wearing your full-body fall arrest harness and lineman belt as shown inFigure 23. Failure to
follow these instructions may result in serious injury or death!
NOTE: One very important note regarding the installation of your climbing system (i.e., climbing sticks, ladders, sectionals, etc.) which meets or exceeds
industry standards recognized by the TMA. You must install the climbing system so the steps extend a minimum of 24-inches [61 cm]) (refer to Figure
24) above your standing platform height. This practice insures you’re stepping off the top climbing stick down onto the standing platform. This practice
also insures you have a firm and secure hand-hold while stepping onto your treestand.
STEP 1: NOTE: Installation of this treestand requires two (2) adults. Select a straight healthy tree, one devoid of dead branches with a minimum
diameter of 9-inches (23 cm) and onethat does not exceed 20-inches (51 cm) in diameter at installation height.
WARNING! Install your climbing system, which meets or exceeds industry standards recognized by the TMA, so they extend a minimum of
24-inches (61 cm) above the standing platform. Failure to follow these instructions may result in serious injury or death!
NOTE: You will require two (2) adults for the installation of your Mentor treestand.

11052019
13
STEP 2: With your climbing system which meets or exceeds industry standards recognized by the TMA installed as outlined in the Manufacturer’s
Instruction Manual, you are now ready to install your True North Treestands Inc. treestand. Always maintain three points of contact when climbing
up/down climbing systems. Always use a pull-up rope to raise and lower any gear. Never climb with anything on your back.
Figure 23
You Must Stay Connected
While Using This Product!
Minimum of 24” (61 cm)
Figure 24
Install Climbing System a Minimum
of 24-inches (61 cm)
Above Standing Platform
WARNING! Never attempt to climb a tree with your treestand in hand or on your back. ALWAYS use a pull-up
(hoist) rope to raise any gear up to the desired installation height. Failure to follow these instructions may result
in serious injury or death!
WARNING! A hoist has been provided with your True North Treestands Inc. treestand. Its sole purpose is
lifting and lowering your treestand. DO NOT ATTEMPT to use this hoist for nay other purpose. Failure to
follow these instruction may lead to serious injury or death!
STEP 3: With a one (1) Quick Hitch Receiver, one (1) Quick Hitch Receiver Ratchet Strap, one (1) Upright Ratchet
Strap, and the Hoist in your possession (do not hold in hand), check to ensure your lineman belt is properly secured
to you and is attached to the tree, then carefully climb, using your linesman belt, to the desired installation height.
STEP 4: Once you reach the desired treestand installation height, re-check to ensure your lineman belt is properly
secured to you and the tree. Make certain you are balanced and securely standing on your climbing system.
STEP 5: While securely standing on your climbing system at your desired treestand installation height, and with your
lineman belt securing you to the tree, hook one (1) end of the Quick Hitch Receiver Ratchet Strap to the
Quick Hitch Receiver and pass the ratchet strap around the tree trunk. Once around the tree trunk, connect
the opposing hook to the Quick Hitch Receiver and ratchet the assembly tight as shown in Figure 25.
IMPORTANT NOTE: Make certain the Quick Hitch Receiver is flush and square to the tree trunk with the
sharp cleats are biting into the tree trunk as shown in Figure 25. Make certain the ratchet strap is not
twisted or kinked. NOTE: The Quick Hitch Receiver MUST be installed flush and square on the tree trunk
or the treestand assembly will not install plumb and square (i.e., level). The wide portion of the receiver
MUST BE FACING UPWARD as shown in Figure 25 (for ratchet threading instructions refer to Figure 26).
IMPORTANT INSTALLATION NOTE
YOU MUST have at least two (2) wraps (turns) of webbing around theratchet spool (barrel) to ensure
good purchase (engagement) of the ratchet strap to the tree. DO NOT install this product on trees which
exceed the receiver’s maximum diameter capacity of 20-inches (51 cm). Likewise, NEVER attempt to install
your treestand/receiver on a tree whose diameter does not meet the minimum installation diameter of
9” (23 cm). DO NOT attempt to install on any tree outside of the minimum and maximum tree
installation diameters of 9-inches (23 cm) to 20-inches (51 cm).
STEP 6: While at treestand installation height, install the Hoist bracket and pulley system as shown in
Figure 27. Make certain the Hoist bracket is oriented directly over the previously installed Quick Hitch
Receiver and is square and firmly seated on the tree trunk (for ratchet threading instructions refer to
Figure 26). The pulley must be installed a minimum of 30-inches (61 cm) above the previously installed
Quick Hitch Receiver as shown in Figure 28 as this distance is needed when hoisting the treestand into
place. If this minimum distance is not achieved, you will not be able to install your treestand in the
most efficient and safest manner. Additionally, make certain there are no twists in the ratchet strap.
Figure 25
Install Quick Hitch Receiver to Tree Trunk
Wide Portion of
Receiver Facing
Upward
Figure 26
Ratchet Strap Threading
4
2
3
1

11052019
14
Figure 27
Install Hoist and Tighten Ratchet Strap
Figure 28
Make Certain Hoist Installed At Least 30-Inches
Above Quick Hitch Receiver
Minimum of 30” (76 cm)
Figure 31
Quick Hitch Hook Positioned Approximately
2 Inches BELOW the TOP of Quick Hitch
Receiver
Figure 29
Attach Hoist Rope to Treestand Figure 30
Attach Standing Platform Ratchet Strap
Treestand
Oriented Upward
STEP 7: Attach your hoist (refer to Figure 15)
rope to the True North Treestands Inc. hang-on
treestand as shown in Figure 29. It is imperative
the seating platform is folded flat onto the
standing platform as shown in Figure 29. It is also
imperative you tie your hoist rope so it prevents
the treestand from opening up (unfolding) while
lifting and it lifts oriented upward as shown in
Figure 29. Should the treestand open while being
hoisted it will become unstable, awkward and
clumsy and result in a dangerous hoisting
condition.
STEP 8: With your treestand attached to the hoist rope as previously outlined, attach the Standing Platform Ratchet Strap to one (1) of the Standing
Platform Ratchet Strap Receivers as shown in Figure 30.
****IMPORTANT HOISTING NOTE****
Never allow anyone to walk and/or stand below or underneath a treestand while it is being lifted, is at installation height, or while it is being
installed or removed. Standing and/or walking under a suspended load (i.e., lifted treestand) presents a very dangerous condition. Should the
load fall it has the potential to seriously injure or kill those below.
WARNING! Never stand and/or walk under a suspended load. Doing so places the user under immediate risk of serious injury or death!
Failure to follow these instructions may result in serious injury or death!
STEP 9: While still secured to the tree trunk with your linesmen belt, and securely standing on your climbing aid, with the help of the second adult,
have them GENTLY and SLOWLY hoist (lift) the treestand up to installation height using the previously installed Hoist. Raise (hoist) the treestand
to a position where the Quick Hitch Hook (refer to Figure 15) is approximately 2 inches (5 cm) BELOW the TOP of the Quick Hitch Receiver as
shown in Figure. 31.
STEP 10: With the treestand hoisted to installation height, with the Quick Hitch Hook positioned
approximately 2 inches (5 cm) BELOW the TOP of the Quick Hitch Receiver, gently lift the treestand
assembly up and place the Quick Hitch Hook into the Quick Hitch Receiver as shown in Figure 32.
STEP 11: With thetreestand hanging in theQuick Hitch Receiver, attach theloose end of the
Standing Platform Ratchet Strap to the remaining Standing Platform Ratchet Strap Receiver as shown in
Figure 33. Refer to the “Standing Platform Ratchet Strap Installation.”
WARNING! The Standing Platform Ratchet Strap MUST BE installed and secured for a safe
installation of this treestand. Failure to properly install this ratchet strap will result in a
dangerous condition. Failure to follow these instructions may result in serious injury or
death!
Figure 32
Insert Quick Hitch Hook Into Quick
Hitch Receiver

11052019
15
Thread theratchet strap as shown inFigure 26. If the seating and standing platform are level, tighten theStanding Platform Ratchet Strap (Figure
34) making certain theAdjustable Leveling Stem is in firm contact with thetree trunk (Figure 35) as shown in “Standing Platform Ratchet Strap
Installation” below. If the standing platform or seatsare unlevel or canted, leave the standing platform ratchet strap loose and adjust the
adjustable leveling stem as outlined in “Adjustable Leveling Stwem Operation.”
STANDING PLATFORM RATCHET STRAP INSTALLATION/OPERATION
Figure 33
Ratchet Strap Installed
on Standing Platform Ratchet Strap Receivers
Figure 34
Standing Platform Ratchet Strap
Installed and Tightened
Figure 35
Ensure Leveling Stem is in
Good Contact with tree trunk
WARNING! The adjustable leveling stem MUST be in firm contact to the tree trunk following installation, if it is not, an unsafe condition exists.
DO NOT use your treestand if the leveling stem is not firmly engaged with the tree trunk. Failure to follow these instructions will lead to serious
injury or death!
ADJUSTABLE LEVELING STEM OPERATION
You must hunt from level, uncanted seatsand standing platforms. Your new True North Treestands Inc. treestand is equipped with an adjustable
leveling stem. This adjustable tree brace allows you to adjust the angle of your treestand installation to give you the most level of hunting
platform. Proper adjustment of this adjustable leveling stem is critical to safe operation of your treestand.
NOTE: The adjustable leveling stem MUST be in contact with the tree trunk when the treestand is installed. This brace provides a solid installation
foundation. If it is not in contact with the tree trunk, your treestand is NOT installed correctly and may fail. YOU MUST ENSURE THIS LEVELING STEM IS IN
FIRM CONTACT WITH THE TREE FOLLOWING INSTALLATION. IF IT IS NOT, REMOVE YOUR TREESTAND AND REINSTALL UNTIL IT IS IN FIRM CONTACT WITH THE
TREE TRUNK. FIGURE 38 OUTLINES THE OPERATION OF THE ADJUSTABLE LEVELING STEM.
Remove Pin
1
Slide leveling stem to Level Seatsand Standing Platform
2
Check Level
3
Re-Install Pin When Seatsand
StandingPlatform Are Level
4
Ensure Leveling Stem Is in Good
Contact with Tree Trunk
Figure 36
Adjustable Leveling Stem Operation/Leveling the Seatsand Standing Platform
Tighten Standing Platform
Ratchet Strap
65

11052019
16
STEP 14: With thestanding platform and seats leveled and theStanding Platform Ratchet Strap installed and tightened as previously outlined,
you may remove thehoist assembly and lower it to the ground viaa pull-up rope.
STEP 15: While still safely attached to the tree via your linesmen’s belt and standing securely on your climbing system, install the Upright Ratchet
Strap. To do so, wrap the ratchet strap around the tree trunk and hook the J-hooks into the sewn loop end of the ratchet strap as shown in Figure
37.Placement of this Upright Ratchet Strap is very important. Make certain it is installed on the treestand upright as shown in Figure 38. With
thestrap installed as pictured, tighten the ratchet strap. For threading instructions, refer to Figure 26. Make certain the Adjustable Leveling
Stem is incontact with the tree as pictured in Figure 39.
Figure 37
Hook J-Hook Into Sewn Loop
Figure 38
Upright Ratchet Strap Placement
Figure 39
Ensure Leveling Stem is in
Good Contact with tree trunk
GAINING ACCESSING TO AND FROM TREESTAND
It is of the utmost importance you remain connected while entering and exiting your True North Treestands Inc. treestand. Most treestand accidents involving
hang-on style treestands occur while the user is either entering or exiting their treestand. For this reason, you MUST stay connected.
While remaining attached to the tree with your full-body fall arrest lineman belt, attach the tree belt of the full-body
fall arrest harness to the tree trunk at a location above the seat. Both the lineman belt and tether of the tree belt
of the full body fall arrest harness shall be attached at the same time. Disconnect the lineman belt and climb above
standing platform and step down onto the center of the standing platform. If there is any looseness, step off the
treestand and back onto the climbing system. Disconnect the treestand and repeat the previous installation STEPS
after re-connecting your lineman belt.
REMOVING YOUR TREESTAND
WARNING! STOP NOW!!!!! Make surethat you are wearing your full-body fall arrest harness system which meets or exceeds industry standards
recognized bytheTMA. Failure to follow these instructions may result in serious injury or death!
WARNING! Prior to attempting to use this or any other True North Treestands Inc. product(s) you must take the time and become familiar with its
setup, installation, use and/or removal at ground-level. You must practice installing, setting-up, using and removing this product(s) at ground-
level prior to attempting to use it at heights above ground-level. Once you have become thoroughly knowledgeable and comfortable with this True
North Treestands Inc. product setup, installation, use and removal at ground-level, you are now ready to use it at heights above ground-level.
Failure to follow these instructions may result in serious injury or death!
WARNING! STOP NOW! Make sureyou are wearing your full-body fall arrest harness and lineman belt as outlined throughout this Instruction
Manual. Failure to follow these instructions may result in serious injury or death!
STEP 1: You will require the help of another adult for the following removal STEPS. You will also require the Hoist and a pull-up rope for these removal STEPS.

11052019
17
Your new True North Treestands Inc. treestand is factory finished with a powder coating that guarantees years of trouble-free service. It is recom-
mended that you store your treestand out of direct sunlight and out of any other harsh environmental condition(s) that may adversely affect its
performance.
IMPORTANT WARRANTY INFORMATION
True North Treestands Inc., extends the following limited warranty for the TNT line of treestand products, bought from an authorized dealer (as published
on the company website) pursuant to an authorized sale. The limited warranty is provided for the period of one year, from the date of purchase from an
authorized dealer. The warranty is limited to products that have defect(s) in material and workmanship that arise under proper use and storage of the product.
Proof of purchase from an authorized dealer plus the return of your warranty application card to our home ofce, address provided below, is required for all
warranty claims. In the event this product is found to be defective within the warranty period, True North Treestands Inc., at its own discretion, shall have as
only obligation and your exclusive remedy, to replace or repair of any defective parts. To obtain warranty service, please contact True North Treestands Inc.,
at [phone] (HUNT TNT). Exclusions to this warranty include unauthorized sales and defects in seat, paint, plastics, webbing and/or defects caused
by operator misuse and/or abuse. Limitation of liability include the forgoing warranty is made in lieu of all other warranties, express or implied and True
North Treestands Inc. disclaims any implied warranty of merchantability and tness for particular purpose.
CARE AND MAINTENANCE/WARRANTY
STEP 2: While safely standing on your climbing system (i.e., climbing sticks, ladders, sectionals, etc.), which meets or exceeds industry standards recognized by the
TMA, at treestand installation height, re-check to ensure your lineman belt is properly secured to you and the tree.
STEP 3: Re-install the Hoist as previously outlined and shown in Figure 27. Ratchet the assembly tight. Make certain the assembly is installed a minimum of 30-inches
(76 cm) above the Quick Hitch Receiver as shown in Figure 28. Fold the standing platform up tight to the seats. Install the hoist rope onto the treestand
assembly as shown in Figure 29
.
STEP 4: With the treestand assembly attached to the hoist rope, remove the Upright Ratchet Strap. Next, remove the Standing Platform Ratchet Strap.
STEP 5: Have the other adult, on the ground, GENTLY put tension on the hoist rope, lifting the treestand just far enough to lift it out of the Quick Hitch Receiver. With
the treestand assembly out of the Quick Hitch Receiver, AND TENSION STILL ON THE HOIST ROPE, disengage the hoist lever. With the hoist disengaged, have the other
adult lower the treestand assembly to the ground below.
STEP 6: With the treestand assembly safely on the ground, climb down to ground level using your lineman belt.

11052019
18
WARRANTY APPLICATION CARD
I have read and understand the safety, assembly and operating instructions provided with my True North Treestands Inc.
treestand. I fully understand the importance of using the full-body fall arrest safety harness which meets or exceeds industry
standards recognized by the TMA, and realize that if I choose not to use the full-body fall arrest safety harness I am putting
myself at an increased risk of injury should an accident occur while I am utilizing this True North Treestands Inc. product(s). I
have read the warranty information and know that I can call True North Treestands Inc. at [phone] or email at info@
hunttnt.com with any questions or concerns that I may have about this or any other True North Treestands Inc. product(s).
NAME
ADDRESS
CITY/STATE/ZIP
PURCHASE DATE
PRODUCT
PURCHASED WHERE
Mail this warranty card to:
True North Treestands Inc.
4338 Innes Rd. Unit 57
Ottawa, Ontario, Canada K4A 3W3

11052019
19
Copyright © True North Treestands Inc., 2020. All rights reserved.
True North Treestands Inc.
4338 Innes Rd. Unit 57
Ottawa, Ontario, Canada K4A 3W3
hunttnt.com
855-HUNT-TNT (1-855-486-8868)
or
[email protected]