TruSens Z-2000 User manual

1 Air Purifier + Power Cord
1 SensorPod™+ Power Cord
Included in your box 1) Remove plastic bag from filter
2) Re-attach filter
Unscrew bottom cover and remove plastic bag from filter.
Secure filter on bottom cover and replace inside the purifier.
IMPORTANT: Before operation of purifier, follow the steps and read our TruSens Owner’s Guide at www.trusens.com/z-2000
©2018 ACCO Brands. All rights reserved.
DuPont™ & the Oval logo are trademarks or registered
trademarks of E.I. du Pont de Nemours and Company
used under license.
EN
Welcome to clean air with TruSens. Thank you for
allowing us to join you on your journey towards wellness.
The air you breathe should be clean, no matter where
you are in the room. TruSens SensorPod™, PureDirect™
Technology & DuPont™Filtration ensure the whole room
benefits from cleaner air.

[email protected] | 1-833-TRUSENS (1-833-878-7367)
Support and Warranty Terms at www.trusens.com
| Power on/off
| Fan speed : Auto/Whisper/1/2/Turbo
| Dimmer on/off
| Timer : 2h/4h/8h/12h
| UV mode on/off
| Carbon/HEPA/UV replacements
0 - 50, Blue
50 - 100, Yellow
100+, Red
| Good
| Moderate
| Poor
21081P002
Two-Year Warranty
3) Set up
Filter Replacement Suggested
Replacement/CleaningFilter Type Item Number
Washable Prefilter
Carbon Filter
HEPA Drum Filter
UV Bulb
Hand wash as needed with water
Every 3 - 4 months*
Every 12 - 15 months*
Every 2 - 3 years*
Not sold separately, see HEPA Drum Filter
AFC-Z2000-01 (3-pack)
AFH-Z2000-01 (includes and )
UVL-Z2000-01
Control Panel
up to 49' (15m)
room coverage up to 375 ² (35 m²)
2
1
3
4
SensorPod™signal indicator
*Replacement indicator will glow red on control panel to notify you to change
Plug-in your air purifier unit and power on.
Plug-in your SensorPod™.
For optimal results, place SensorPod™on tabletop or counter
across the room, within line of sight of the purifier.
Signal strength may vary by location.
23
4
1
1 2 3
EN