Trust 370B User manual

370B EASY SCROLL WIRELESS DESKSET
1
UK
Method when using for the first time Chapter
1. Uninstalling old drivers and devices (3.1)
2. Connecting (3.2)
3. Software Installation in Windows (3.3)
4. Checking after the installation (4.0)
1 Introduction
This instruction manual is for users of the TRUST 370B EASY SCROLL WIRELESS
DESKSET. The TRUST 370B EASY SCROLL WIRELESS DESKSET has 33
multifunctional buttons and has been developed to provide greater efficiency and
productivity when working with a PC. Now you have more hot keys which makes
working with the PC easier and programs (like Microsoft Office) are quickly
accessible by a simple press of a key. The Trust navigation wheel lets you scroll up
& down any (Internet) page. The mouse is a five-button mouse with scroll wheel and
convenient cradle for storing the mouse when it is not in use. The mouse is suitable
for right and left handed users. Three buttons can be programmed with the included
software for easy access to frequently used functions. The set is wireless and works
at a frequency of 27 MHz. It has one channel with 256 different ID codes. This set
can be used for a distance of up to 1meter.
2 Safety
Carefully read the following instructions before use:
-The TRUST 370B EASY SCROLL WIRELESS DESKSET does not require
any special maintenance. Use a slightly damp, soft cloth to clean the set.
-Do not use aggressive substances, such as petrol or white spirit, to clean the
device. These may harm the material.
-Do not submerge the device in liquid. This may be dangerous and will
damage the device. Do not use this device near water.
-Make sure nothing is placed on the cable. Do not use this device in an area
where the cable can become worn or damaged as a result of people walking
over it.
-Do not repair this device yourself.
0470
-This device operates at a frequency of 27.045 ~ 27.555 MHz. It has been
approved according to the European R&TTE guidelines and meets the
essential requirements and other relevant conditions of Directive 1999/5/EC.
This device may be used in all EU countries, NO, CH, PL. The Declaration of
Conformity (DoC) is available at www.trust.com/13106/ce
-There may be limitations for the use of this device outside of the EU. If this
device is used outside of the EU, check whether this device meets local
regulations. Frequency: 27.045 ~ 27.555 MHz, Bandwidth:
+/- 4,5 KHz, Capacity: 0.12mW.
-Nowadays, there are an increasing number of wireless products (video,
audio, convenience, computer, etc.) which work in the same frequency range
as this device. It may, therefore, be possible that the functionality of this
product can be limited by or be limiting for other wireless products. This can
only be avoided by paying attention to the distance between products and,
where possible, by changing channels.
!

370B EASY SCROLL WIRELESS DESKSET
2
-Be careful when using wireless devices if you have a pacemaker or are
dependent on other life-saving, sensitive electronic equipment. This product
transmits radio signals!
3 Installation
3.1 Uninstalling old drivers and devices
The most common cause of faults during installation is the presence of a driver for a
similar, old product. The best solution is to first remove all drivers related to old
devices before installing the new driver. You can use your old hardware for this.
1. Enter the Windows ‘Safe Mode’ (press F8 before starting Windows and then
select ‘Safe Mode’ from the menu which is displayed).
2. Go to ‘Start – Settings – Control Panel’ and double-click on the ‘Add/Remove
Programs’ icon.
3. Find all the programs for similar, old devices and remove these by clicking on
the ‘Add/Remove’ button. When in the ‘Safe Mode’, it is possible for some
programs to appear twice. In that case, remove all the programs that appear
twice.
4. Shutdown the computer and disconnect the old hardware if any.
3.2 Connecting
1. Connect the keyboard (purple) and mouse (green) plug of the receiver to the
PS/2 connections on your computer. Read the manual of the pc/mainboard
how to do this.
2. Place the keyboard in front of you. Put the palmrest pins in front of the
keyboard holes and gently press so they click into the keyboard.
3. Turn the computer on.
4. The hardware will be installed automatically as a standard PS/2 keyboard
and mouse.
5. Hardware installation is finished, now continue with making a wireless
connection with the mouse and installing the software to use the extra
multifunctional buttons.
Note: The keyboard and mouse will not work after they have been connected.
A wireless connection must first be made between the keyboard, the
mouse and the receiver before the set can be used.
Note: Do not recharge the batteries. These are NOT rechargeable.
Note: Inserting the batteries incorrectly may damage the device.
3.3 Making a wireless connection
1. Make sure your computer is turned on.
2. Make sure that all products are not more than 1meter apart and that there are
no objects (or a total metal surface) in between since this will reduce the
functionality of the connection.
3. Make sure that the batteries are placed and are full enough.
4. The receiver has two different coloured indicators. The red indicator is for the
keyboard and the green indicator is for the mouse. These two indicators are
located in a single lamp on top of the receiver (J in figure 6).
5. Press the ID button on top of the receiver (I in figure 6). The indicators will
flash simultaneously.
6. On the bottom right side of the keyboard’s press the round ID button. The red
indicator on the receiver will stop flashing to indicate that the keyboard has
made a connection with the receiver.

370B EASY SCROLL WIRELESS DESKSET
3
UK
7. Press the round ID button on the bottom of the mouse (G in figure 6). The
green indicator will also stop flashing. The indicator will remain constantly lit
as an orange colour (combination of red and green).
8. The keyboard and mouse have now made a connection with the receiver.
3.4 Software installation in Windows 98 / ME / 2000 / XP
Note: The latest driver/software can be downloaded from
www.trust.com/13106. Check whether a new driver is available and use
this for the installation.
Note: Make sure all other programs are closed during the installation.
Note: In the example, ‘D:\’ is used to indicate the CD-ROM drive. This may be
different for your computer, it could be E:\ or another letter.
1. Insert the CD-ROM into your computer’s CD-ROM drive. The installation
program will start automatically. If it does not start automatically, carry out
the following:
a) Select 'Run' from the Start menu.
b) Type [D:\SETUP.EXE] and click on 'OK' to start the Trust Software
Installer.
2. Figure 2 will appear.
3. Click on ‘Trust Keyboard Utility‘ to start the installation of the keyboard.
4. Follow the on-screen instructions.
5. Click on ‘Trust Mouse Utility‘ to start the installation of the mouse.
6. Follow the on-screen instructions.
The installation of the software for the keyboard and mouse has now been
completed.
4 Checking after the installation
After installing the device and the driver, the following are installed on your computer
and can be checked:
‘Start – Settings – Control Panel’. Double-click on the ‘System’ icon and select the
‘Device Manager’ tab.
Keyboard – Standard 101/102 Key or Microsoft Natural Keyboard
Mouse – Standard PS/2 Mouse
‘Start – Settings – Control Panel’ and then double-click on the ‘Add/Remove
Programs’ icon.
Trust Keyboard Utility 1.0
Trust Mouse Utility 1.0
Start - Programs - Trust
Trust – Keyboard Utility v1.0
Trust – Mouse Utility v1.0
Note: The information given in this chapter may vary when the user has altered
the installation (for example, not everything has been installed or
locations other than the default locations have been selected).
Note: Deviations may also occur as a result of using new drivers available on
the Internet.
Note: The location or name in the ‘Control Panel’ may vary for different
Operating Systems.

370B EASY SCROLL WIRELESS DESKSET
4
5 Usage of the keyboard
5.1 Keyboard buttons
Besides the standard keys, the keyboard also has 33 multimedia buttons.
These are listed below in table 1. Use the F(unction) Lock Key (fig. 3) to switch
between the normal function keys or their multifunctional use. Also to use the Euro
symbol, the F(-lock) key must be on.
Table 1
Key Function Explanation/remarks
F
F(unction)
lock
Fig. 3
Switch the function from the normal function
keys to the enhanced function keys. They are
printed underneath the Function (F1-F12)
keys.
Help Open the Help file (if available) for the active
window.
New Create a new document in programs that
support the command.
Open Open a document in programs that support
this command.
Save Save the file in the active window.
Replace Search for and replace the specified text and
formatting.
Spelling Start the spell-checking program in the active
document if the document’s program provides
this feature.
Redo Redo the previous undo.
Reply Reply to the e-mail in the active window.
Reply All Reply to all the e-mails in the active window.
Forward Forward the e-mail in the active window.
Send Send the e-mail in the active window.
€Euro Press to display Euro sign mark. F(lock)must
be on to use this sign.

370B EASY SCROLL WIRELESS DESKSET
5
UK
Key Function Explanation/remarks
Word
Open Microsoft Word.
This hot key can be configured to another
application for user’s need.
Excel
Open Microsoft Excel.
This hot key can be configured to another
application for user’s need.
Power
Point
Open Microsoft PowerPoint.
This hot key can be configured to another
application for user’s need.
Calendar
Opens the Calendar of Microsoft Outlook.
This hot key can be configured to another
application for user’s need. In the internet
options of windows you can also change
which calendar should be used.
Backward Go back to the previously viewed item in
programs that support the “Back” command,
such as a Web browser. This hot key can be
configured to another application for user’s
need.
Forward Go to the next item – if it was previously
viewed in the same session – in programs
that support the “Forward” command, such as
a Web browser. This hot key can be
configured to another application for user’s
need.
Stop Stop loading or refreshing a Web page or the
contents of a particular window. This hot key can
be configured to another application for user’s
need.
Internet
explorer
Start the default Web browser and go the
Home Web page. If the Web browser is
already activated it opens the Home Web
page. You can reassign the WWW key to
start another Web browser, another Home
Web page or another application.
Email
program
Start the default e-mail program. If you are not
sure what the default e-mail program is, press
this key to find out. You can reassign the
Email key to start another e-mail program or
another application. Also you can choice your
own email program in the internet options of
windows. This hot key can be configured to
another application for user’s need.

370B EASY SCROLL WIRELESS DESKSET
6
Key Function Explanation/remarks
Favourites
Open the Internet Explorer Favorites panel.
This is where you can store shortcuts to
frequently used files, websites or other items
for easy access. This hot key can be
configured to another application for user’s
need.
Refresh Update the information on an active Web
page or the contents of a particular window.
This hot key can be configured to another
application for user’s need.
Search Open the Internet Explorer Search panel. This
hot key can be configured to another
application for user’s need.
Play/Pause Play or Pause media. Once paused, press
this key again to resume playing. This hot key
can be configured to another application for
user’s need.
Stop Stop playing media. This hot key can be
configured to another application for user’s
need.
Volume up Increase the volume. Hold down to increase
the volume more quickly. This hot key can be
configured to another application for user’s
need.
Volume
down
Decrease the volume. Hold down to decrease
the volume more quickly. This hot key can be
configured to another application for user’s
need.
Mute Turn off the sound. Press again to turn the
sound back on. This hot key can be
configured to another application for user’s
need.
Pre-track Switch to the previous media track. Press
once for each preceding track. This hot key
can be configured to another application for
user’s need.
Next track Switch to the next media track. Press once for
each subsequent track. This hot key can be
configured to another application for user’s
need.

370B EASY SCROLL WIRELESS DESKSET
7
UK
Key Function Explanation/remarks
Shut down
Put the system into power-off mode if the PC
supports power management and has it
enabled. The user can switch off the
computer directly by pressing this key. If
power management is not enabled, this key
will not work. Power-on function availability
depends on the motherboard setup function.
For more information on such functions, read
the computer manual or contact the computer
manufacturer.
Sleep
Put the system into sleep mode if the PC
supports power management and has it
enabled. The user can put the computer to
sleep at the press of any button, protecting
data and saving energy. If power
management is not enabled, this key will not
work.
Log off
Open the Log Off Windows dialog box.
Logging off closes all of programs,
disconnects the computer from the network
and prepares the computer to be used by
someone else.
Note: for the “Log Off” key:
For Win 98 / ME / XP: Some applications
require a great deal of system resources. This
can lead to the delayed reaction of the “Log
Off” key. If the Log Off dialog window does
not open when the key is pressed or only the
“Start” menu opens, press “ESC”, then press
the “Log Off” key again.
For Win 2000/XP: The “Log Off” key has to
be activated. To do so, proceed as follows:
“Settings-Taskbar-Advanced-Display Logoff”:
My
computer
Open My Computer. My computer shows the
contents of your floppy disk, hard disk, CD-
ROM drive and network drives. You can also
search for and open files and folders, and
gain access to options in Control Panel to
modify the computer’s settings.
Calculator Start Microsoft Calculator.
Cut Cut out the selected item.
Paste Paste the previously cut out or copied item at
the cursor position.
Copy Copy the selected item.

370B EASY SCROLL WIRELESS DESKSET
8
Key Function Explanation/remarks
MMark
Mark the selected item, and use “Å” or “Æ” to
mark the text.
Backward
Go back to the previously viewed item in
programs that support the “Back” command,
such as a Web browser
Forward
Go to the next item – if it was previously
viewed in the same session – in programs
that support the “Forward” command, such aw
a Web browser.
Switch
program
Switch the focus to a previously opened
window. Press the key and select the window
to be activated.
Close
program
Close the active Windows application when
the key is pressed.
Navig.
Wheel Bar
Move around in a scrollable document as if
you were using the scroll arrows or a mouse
wheel, but without taking your hand off the
keyboard.
5.2 Software
The multimedia buttons can be programmed using the keyboard software. Carry out
the following:
1. Double-click on the Trust icon on the right-hand side of the taskbar. Figure 4
will appear.
2. The multimedia buttons will be displayed.
3. Click on the button to change the function of them.
Figure 5 will appear.
4. Three choices are given once you click on the button.
These are, from top to bottom:
•First, the pre-programmed function. Nothing has to be done.
•Second, one function you can assign by selecting one from the list.
Click on the triangle to get a list of functions you can click to select.
•Third, launch program or website. Select this to have the button
assigned to a special program or website of your choice.
The first and second options are self-explanatory. If you select the third
option, carry out the following:
-Click on launch program or website.
-You can select a file by clicking on ‘Browse’ and selecting a
file/program.
-Click on open. The program is now assigned.
-You can also type directly type an URL like www.trust.com for
example and click ok. The website is accessible by this button.

370B EASY SCROLL WIRELESS DESKSET
9
UK
Right clicking with the mouse on the icon in the taskbar gives other functions. Using
the function onscreen display it is possible to alter settings of the OSD menu that
appears when using the multimedia buttons. You can change the colour of the
window, size of text etc. In this tab, you can also indicate how long the OSD menu
must remain visible after the multimedia button has been released (1 – 10 seconds).
After you have made the desired settings, click on ‘ok’ to confirm your settings.
5.3 Using the special keys
1. For usage of the special functions buttons turn them with on the special F
(lock) button This looks like fig. 3.
2. Now you can use all the special functions that are written on the bottom part
of the keys itself. Turning it off will enable the functions written on the top
side (F1, F2, F3) of the keys.
5.4 Using the scroll wheel
The scroll wheel functions like the scroll wheel on the mouse so you can scroll
through Internet pages or documents.
5.5 The Euro sign
The “€” Euro sign key is located on the “Num Lock” key and controlled by the F (lock)
Key (fig. 3). The “€” key will work only when the F (lock) Key is on. For normal
Numberic Pad function, just turn off the F (lock) Key. The “€” sign will not appear any
more when pressing it. The Num lock key will be back to normal function.
Recent versions of the Windows family such as Windows XP, Windows 2000, Me
and 98 provide you the selection of the font types and currency user settings for the
“€” Euro sign. You might need to update the operation system in order to input,
display, and print the font correctly. Please download the upgrade file from Microsoft
web site:
http://www.microsoft.com/windows/euro.asp
6 Use of the mouse
6.1 Explanation of the buttons
The mouse has five different buttons and a scroll wheel. The functions of these
components and those of the receiver are given in table 2. Use this table together
with figure 6.
Item Name Function
AButton 1 Left mouse button function.
BButton 2 Right mouse button function.
CButton 3 Programmable third mouse button + scroll
wheel.
DButtons 4 + 5 Programmable fourth and fifth mouse buttons
on the left-hand and right-hand side of the
mouse.
EID button Button for making a wireless connection.
FID indicator Indicates whether there is a wireless

370B EASY SCROLL WIRELESS DESKSET
10
Item Name Function
connection.
GID button Button for making a wireless connection.
HBattery
compartment
Place the batteries here.
Table 2: Explanation of the mouse
6.2 ID channels
This receiver has 256 id-codes for linking to the mouse. If you might notice that
someone nearby is working on the same channel as you, simply move the receiver
away out of reach of the other receiver or make a new connection by following the
steps mentioned in chapter 3.2 to change the id.
6.3 Battery indicator
The mouse also has a battery low indicator built inside the mouse wheel. When it will
continuously light up red you need to replace the batteries with new ones of the
same type. It is also possible to use rechargeable batteries however recharging
needs to be done by a separate (not included) charger.
6.4 Software
1. Double-click on the Trust icon (fig. 7) in the taskbar.
2. The mouse properties window will appear (figure 8).
3. The scroll wheel mode can be selected in the ‘Scroll wheel’ tab.
4. There are two options:
•Increased scroll mode; has all the advantages of the MS-Intellimouse
and scrolls in Windows 98, Windows ME, Windows 2000 and Windows
XP.
•Intellimouse mode; works as an MS-Intellimouse.
5. Select the scroll wheel speed.
6. The buttons 3, 4 and 5 can be programmed in the ‘Buttons’ tab (see figure 9).
7. Select a button and click on the arrow on the right-hand side. A drop-down
menu will appear (see figure 10).
8. Select the function you wish to use.
9. Click on ‘Apply’.
The mouse has now been programmed.
Right clicking on the Trust icon and then selecting active mouse property will let you
set windows mouse properties like left and right hand use amongst others functions.
Right clicking on the icon and then selecting exit will let you stop.
6.5 Uninstalling the software
Too uninstall the software, go to the Start - Programs - Trust -Trust Keyboard Utility
or Start - Programs - Trust -Trust Mouse Utility and then select uninstall. Follow
instructions on the screen and uninstallation is completed.

370B EASY SCROLL WIRELESS DESKSET
11
UK
7 Maintenance
The ball of the mouse will become dirty through use and cause the mouse to
function poorly. It is, therefore, necessary to regularly clean the ball.
1. Turn off the computer and turn the mouse upside down.
2. Remove the ring that keeps the ball in position.
3. Remove the ball from the compartment.
4. Clean the compartment where the ball is housed. Figure 11 shows the
bottom of the mouse with an open mouse ball compartment. Use a cotton
bud that has been dampened with water. Do not use too much water. This
may cause the mouse to stop functioning. Clean the ball by placing it under
cold, running water. Dry the ball using a lint free cloth. Place the ball back in
the mouse. Refit the ring and turn the computer on.
8 Troubleshooting
Method
1. Read the solutions given below.
2. Check for up-to-date FAQ’s, drivers and instruction
manuals on the Internet (www.trust.com/13106).
Problem Cause Possible solution
The software cannot
work properly.
Old software is still
installed.
Remove the other keyboard
driver/software, restart your
computer and re-install the
Trust software. It will give a
selection of choices and
then select install.
Other application
software cannot be
installed properly.
Possible conflict. This may be due to the
Trust software. Remove the
trust software and install the
required application, and
then reinstall theTrust
software.
The shortcut keys
default by Microsoft
Windows cannot be
assigned.
Resources are used by
the software.
The software has taken
over some system
resources for the shortcut
keys the following 5
combination keys cannot be
used again.
“Ctrl + Alt + E”,
“Ctrl + Alt + P”,
“Ctrl + Alt + O”,
“Ctrl + Alt + D”,
“Ctrl + Alt + C”
!

370B EASY SCROLL WIRELESS DESKSET
12
Problem Cause Possible solution
Office Keys or
multimedia buttons do
not react when
pressed.
Not all Office programs
are installed or buttons
are not configured
correctly.
Install the other Office
programs or configure the
buttons.
Log Off key does not
work.
System has resources
in use.
Some software share a lot
of system resources. It will
cause the system to lose
the function of the “Log Off”
key sometimes. When you
press the “Log Off” key, if
the dialog box does not
appear or just open the
“Start“ menu, you should
press the “Esc” key and
“Log Off” key again.
For Win2000, you have to
enable the function of the
“Log Off” key by yourself
because the default is
disabled.
The office keys do not
work.
Not supported by
program.
These keys are according to
the standard definition of
Microsoft shortcut
combination keys. Make
sure that your software
application supports these
kinds of functions.
Recommend using
Office2000 and IE5 or later.
The target items
cannot be unmarked.
Function needs to be
disabled.
When you press the “Mark”
key and roller keys to mark
the target items, the “Mark”
key will always activate.
Press Cut, Paste, Copy
keys to edit your document
and will stop the “Mark”
function. However, it can
also be released by
pressing the “Esc” key.
Mouse wheel conflicts
with keyboard wheel
function.
Conflict between mouse
and keyboard.
Only use one wheel at a
time.
The multimedia
buttons do not react or
the scroll function
does not work.
Windows displays an
error message
concerning the
keyboard when the
computer is started.
The keyboard or
software has not been
installed/ connected
(correctly).
Connect the purple PS/2
keyboard plug to the correct
port on your computer
(check that it is not the
mouse port) Read the
manual of the
pc/mainboard.

370B EASY SCROLL WIRELESS DESKSET
13
UK
Problem Cause Possible solution
Check whether the port
works correctly.
Do not use an adapter
between the PC and
keyboard if you have an
older DIN connection.
Software is not installed
properly.
Install the software. (see
chapter 3.3).
The Num. lock key
cannot work.
F (lock) key (fig. 3) is
on.
Turn off the F (Lock) Key.
The Num lock key will return
to the normal function.
The Euro sign doesn’t
work.
Is not supported by
windows.
If you press the “€” key the
first time and cannot display
“€” mark, make sure first
that both of the “Office
Lock” (fig. 3) and the “Num
Lock” are on. If both LED
are on, press “€” key again.
Recent versions of the
Windows family such as
Windows XP, Windows
2000, Me and 98 provide
you the selection of the font
types and currency user
settings for the “€” Euro
sign. You might need to
update the operation
system in order to input,
display, and print the font
correctly. Please download
the upgrade file from
Microsoft web site:
http://www.microsoft.com/wi
ndows/euro.asp
The mouse arrow
moves erratically on
the monitor.
The ball itself or the ball
compartment could be
dirty.
Clean the ball or look for
dirt inside the ball
compartment. See chapter
6 for further information.
The software has not
been installed.
Install the mouse software.
The scroll function
does not work.
The software has not
been configured
correctly.
Configure the software
correctly.

370B EASY SCROLL WIRELESS DESKSET
14
Problem Cause Possible solution
The indicator on the
receiver does not light
up.
The PS/2 plug(s) has
not been connected
correctly.
Connect the plug to the
PS/2 port(s) on your
computer. Check whether
the port works correctly.
No batteries have been
inserted.
Insert the batteries
The batteries are
(almost) empty.
Replace the batteries, the
led in the mouse or
keyboard will light up.
There is no wireless
connection between the
mouse and receiver.
Make a wireless connection
with receiver (see chapter
3.2).
The distance between
the receiver and the
mouse is too great.
Place the mouse and/or
keyboard closer to the
receiver. The maximum
distance is 1 metre. Avoid
placing it on a metal surface
since it will decrease the
reception.
Another device close by
uses the same
frequency as the
mouse.
1) Change the channel (see
chapter 3.2)
2) Place the receiver closer
to the mouse and keyboard.
The mouse or
keyboard do not react.
The mouse is connected
with a serial converter.
Do not use a converter with
this mouse.
The software for your
previous mouse is still
active.
Remove the software for
your previous mouse before
installing the Trust software
(see chapter 3.1).
Windows displays an
error message
concerning mouse
when the computer is
started. The mouse has not
been connected or has
not been connected
correctly.
Connect the mouse
correctly and restart the
computer.
The software has not
been (correctly)
installed.
Remove all the drivers and
reinstall them (see chapters
3.1-3.4).
The configured mouse
buttons do not react.
The software for your
old mouse is still active.
Remove the old software
(see chapter 3.1).
The software has not
been installed.
Install the mouse software.
The scroll function
does not work.
The software has not
been configured
correctly.
Configure the software
correctly.

370B EASY SCROLL WIRELESS DESKSET
15
UK
If you still have problems after trying these solutions, please contact one of the Trust
Customer Care Centers. You can find more information at the back of this instruction
manual. Please have the following information available:
•The item number. This is 13106 US layout; 13107 FR layout; 13108 IT layout;
13109 GM layout; 13110 UK layout; 13111 SP layout.
•A good description of what does not work.
•A good description of when the problem occurs.
Warranty conditions
-Our products have a two-year manufacturer's warranty which is effective from
the date of purchase.
-If there is a fault, return the product to your dealer and include an explanation
of the fault, the proof of purchase and all the accessories.
-During the warranty period, you will receive a similar model, if one is
available. If no similar product is available, your product will be repaired.
-Please contact our help desk for missing components, such as the instruction
manual, software or other components.
-The warranty becomes invalid if the product is opened, if there is mechanical
damage, if the product has been misused, if alterations have been made to
the product, if the product has been repaired by a third party, in the case of
negligence or if the product has been used for a purpose other than that
originally intended.
-Excluded from the warranty:
•Damage caused by accidents or disasters, such as fire, flood, earthquakes,
war, vandalism or theft.
•Incompatibility with other hardware/software which is not stated in the
minimum system requirements.
•Accessories, such as batteries, fuses (if applicable).
- Under no circumstances will the manufacturer be held responsible for any
incidental or consequential damage, including the loss of income or other
commercial losses resulting from the use of this product.