Trust AMI MOUSE 250S CORDLESS 12578 User manual

TRUST AMI MOUSE 250S CORDLESS
1 Introduction
This manual is intended for users of the TRUST AMI MOUSE 250S CORDLESS. This
mouse allows for cordless handling, by means of an infrared connection. The receiver
of the mouse can be connected to the PS/2 port of your computer. The mouse has
three buttons. UK
2 Safety
1. Do not use the device in damp environments, such as bathrooms, damp
basements, swimming pools, etc.
2. Do not attempt to repair the device yourself.
3. Under the following circumstances, have the device repaired by qualified
repair people:
a) The cable or plug is damaged or worn;
b) Liquid has entered the device;
c) The device has fallen and/or the casing has been damaged;
d) The device is definitely functioning worse.
4. Position the device in such a way that the cables cannot be damaged..
3 Installation
3.1 Batteries
Insert the batteries into your mouse in the following manner.
1. Open the battery cover at the bottom of the mouse.
2. Insert the batteries into the compartment. See Figure 1. The inside of the
mouse shows how the batteries are to be placed.
3. Now close the battery cover.
Note: Inserting the batteries incorrectly may cause damage.
1

TRUST AMI MOUSE 250S CORDLESS
3.2 Connecting the mouse
Note: Before connecting the TRUST AMI MOUSE 250S CORDLESS to
the PS/2 port the former mouse software has be deleted.
1. Make sure your computer is shut down and that any old mouse drivers have
been deleted from your system.
2. Connect the IR receiver to the PS/2 port of your computer.
3. Start up the computer.
• All operating systems will autodetect and install the mouse.
4. The green LED on the IR receiver will light up when the mouse is moved.
3.3 Software Installation
1. Place the CD-ROM in your CD-ROM drive. The Installer will start up
automatically.
If it doesn’t, do the following:
a) Select ‘Execute’ in the Start menu.
b) Type [D:\SETUP.EXE] and click ‘OK’ in order to start up the Trust
Software Installer.
2. You will see a screen as in Figure 2.
3. Click the language you wish to use during the installation.
4. Click 'TRUST AMI MOUSE 250S CORDLESS‘ in order to start up the
installation.
5. Follow the steps onscreen.
6. At the end of the installation, Figure 3 will appear. Select ‘Yes, I want to restart
Windows’ and click ‘Finish’. Windows is now restarted and the mouse is ready
for use.
4 Usage
4.1 Mouse
An explanation on the button functions is given in Table 1, in combination with Figure
4.
Button Function Note
A Right mouse button Button 1
B Left mouse button Button 2
C Scroll wheel + third
mouse button
Vertical scrolling. Push the wheel in order to
use the third mouse button.
Table 1: Button Functions
2

TRUST AMI MOUSE 250S CORDLESS
4.2 Software
1. Double click the Trust icon in the system tray. See Figure 5.
UK
2. The screen with the tab sheet ‘buttons’ will appear. See Figure 6.
3. In the tab sheet ‘buttons’ you can:
• Attribute buttons; select the desired button and attribute the functions, using the
pulldown menu.
• Set the double click speed; Move the slider towards slow or fast.
• Set for right-handed or left-handed usage; select left or right-handed.
• After attributing the desired settings, click ‘apply’.
4. In the tab sheet ‘pointers’ (Figure 7) you can:
• Change the rendering of the onscreen pointer.
5. In the tab sheet ‘Motion’ you can:
• Adjust the speed, rendering, location and position settings of your
mouse.
6. In the tab sheets ‘Settings’ (Figure 8) you can change the ‘netjump’ and
‘luckyjump’ menu to your liking.
7. Click one of the commands in the command menu and select the button you
wish to take this command in the buttons next to the command menu.
Note: The ‘netjump’ and ‘Luckyjump’ menu can be attributed to one of the
mouse buttons via the tab sheet ‘buttons’, and then tab sheet ‘settings’
in which you actually define these.
3

TRUST AMI MOUSE 250S CORDLESS
5 Troubleshooting
Problem Cause Possible solution
The receiver was not
connected to the
computer properly.
Check the PS/2 connection.
Computer not started up. Start up the computer.
Batteries not inserted
correctly.
Insert the batteries as indicated
in the battery compartment.
The green LED on
the receiver does
not light up (there is
no connection
between the mouse
and the receiver).
Batteries are empty. Insert new batteries.
Batteries are low. Insert new batteries.
Too much distance
between mouse and
receiver.
The distance can be 1 meter at
the most.
Mouse operation is
jolting.
There is an obstacle
between the mouse and
the receiver.
Make sure the mouse and the
receiver are pointed towards
each other with no obstacles in
between.
Problem not listed
here.
FAQ update available
online.
Go to www.trust.com/12578 for
FAQ.
Register your product via www.trust.com so that you are able to receive optimal
guarantee and service support such as up-to-date FAQ and the latest drivers. You will
also be automatically informed of developments to your product and of other Trust
products. And use the opportunity to win some spectacular prizes.
If you still have any problems after trying these solutions, please contact one of the
Trust Customer Care Centres. You can find more information on the last page of this
manual. Please have the following information available:
• The article number. This is: 12578;
• Information about your hardware: CPU; PS/2; internal memory; operating
system;
• A good description of what exactly fails to work;
• A good description of when exactly the problem occurs.
4