Trust FLAT SCAN USB19200 User manual

Combi Scan USB 19200
COMBI SCAN USB 19200
User's manual
Version 1.0

Combi Scan USB 19200
Thank you
Thank you very much for purchasing this product from the Trust range. We wish you
hours of fun with it. Please read this manual carefully before using the product.
Registration
Register your purchase now at the Trust Internet site (www.trust.com) and you could
win one of the fabulous prizes. The web site is also the place to look for dealer
addresses, comprehensive product information, drivers, and FAQ (Frequently Asked
Questions) sheets.
Copyright Statement
No part of this manual may be reproduced or transmitted, in any form or by any
means, electronic or mechanical, including photocopying, recording, or information
storage and retrieval systems, for any purpose other than the purchaser's personal
use, without the prior written permission of the manufacturer.
Disclaimer Statement
The manufacturer specifically disclaims all warranties, either express or implied,
including but not limited to implied warranties of merchantability and fitness for a
particular purpose, with respect to the software, the product manual(s) and written
materials, and any other accompanying hardware. The manufacturer reserves the right
to revise or make improvements to its product at any time and without obligation to
notify any person of such revisions or improvements.
In no event shall the manufacturer be liable for any consequential or incidental
damages, including any loss of business profits or any other commercial damages,
arising out of the use of its product.
* All company or product names are trademarks or registered trademarks or service
marks of their respective owners.
01 UK 11255 COMBI19200.doc

Combi Scan USB 19200
1
Contents
1. Introduction................................................................................. 2
1.1 Conventions...........................................................................2
1.2 Contents................................................................................3
1.3 Minimum system requirements ..............................................3
2. Safety........................................................................................... 4
3. Connecting the scanner.............................................................. 5
3.1 Unlocking the transport locks.................................................5
3.2 Connecting the scanner .........................................................6
3.2.1 Parallel printer port.........................................................7
3.2.2 USB port ........................................................................ 8
4. Installing the driver and software............................................. 10
4.1 Installing the driver............................................................... 10
4.2 Installing TextBridge Classic 2.0 .......................................... 12
4.3 Installing Adobe PhotoDeluxe 2.0......................................... 15
5. Making a scan ........................................................................... 19
5.1. TWAIN main menu.............................................................. 19
5.2 Advanced TWAIN menu....................................................... 21
5.3 Monitor calibration............................................................... 23
5.4 Preferences ......................................................................... 24
5.5 Making a scan .....................................................................25
6. Working with Adobe PhotoDeluxe............................................ 26
6.1. Initial scanner settings ......................................................... 26
6.2. Scanning with Adobe PhotoDeluxe....................................... 27
7. Working with TextBridge.......................................................... 28
7.1. Settings............................................................................... 28
7.2. Scanning with TextBridge Classic......................................... 29
8. Maintenance.............................................................................. 31
9. Troubleshooting........................................................................ 32
9.1. Testing the scanner.............................................................. 32
10. Specifications ........................................................................... 35
11. Trust Service Centers............................................................... 36

Combi Scan USB 19200
2
1. Introduction
This manual is intended for users of the Combi Scan USB 19200 scanner. No
previous knowledge is required for installation and use of this product.
Note: This scanner will not work with MS-DOS, Windows 3.1x/NT3.x, or Apple
Macintosh computers.
If you have any questions after reading this manual, please contact one of the
Trust service centres. You will find information on the service centre nearest to
you at the back of this manual. You can also visit the Trust website
(www.trust.com) for support, comprehensive product information, drivers, and
FAQ (Frequently Asked Questions) sheets.
1.1 Conventions
This manual uses the following layout conventions for instructions:
<key> Requires the user to press a key. The key legend is shown between
the angle brackets.
‘System’ This is a software-specific term, e.g. a term used by Windows.
[DIR] Text in this font is to be typed by the user.
(term) The text between the parentheses (….) is the English term, e.g.
(File), referred to in the accompanying illustration.
Additional information is shown as follows:
Note: Switch off the computer before connecting the scanner
The examples assume that your computer system has assigned the letter “D” to your
CD-ROM drive. If your computer uses a different drive designation for your CD-ROM
drive, e.g. “E”, replace “D” in the text with “E”.

Combi Scan USB 19200
3
1.2 Contents
Check the package contents before reading the instructions. You should find the
following:
•Scanner
•Power supply adapter
•Interface cable
•EPP-USB conversion cable
•CD-ROM with drivers, applications, and user's manual
•CD-ROM Adobe PhotoDeluxe 2.0
•Quick Installation Manual
1.3 Minimum system requirements
•IBM compatible PC with Pentium 100MHz CPU and 16 MB RAM
•Microsoft Windows 95, 98 or Windows NT 4.0
•Printer port (EPP) for Windows 95, 98 or NT4.0
•USB port for Windows 98
•Hard disk drive with at least 60 MB free disk space (for installation)
•4X CD-ROM drive

Combi Scan USB 19200
4
2. Safety
Read the following instructions carefully before use:
1. Disconnect any power plugs from the mains supply before cleaning the
equipment.
2. Do not use this equipment in humid environments like bathrooms, damp cellars,
swimming pools, etc.
3. Make sure nothing is placed on the power supply lead.
4. Do not insert any objects into the slots in the equipment's casing.
5. Do not attempt to repair this equipment yourself.
6. If any of the following conditions occur, remove the power plug from the mains
supply and have the equipment serviced by qualified personnel:
a) the power lead or plug have become damaged or worn;
b) liquid has entered the equipment;
c) the equipment has been dropped, and/or the casing has become damaged;
7. Do not place this product in direct sunlight. Exposure to direct sunlight or
excessive heat can damage the product.

Combi Scan USB 19200
5
3. Connecting the scanner
3.1 Unlocking the transport locks
The scanner has 2 locks to prevent damage during transport. Before the scanner can
be used, these must be unlocked.
1. The first lock is on the front of the scanner. Slide the lever to the left to unlock
(see Figure 1).
Figure 1: Unlocking the transport locks
2. The second lock is on the underside of the scanner. Turn the knob a quarter
turn counterclockwise to unlock (see Figure 2).
Figure 2: Unlocking the transport locks

Combi Scan USB 19200
6
3.2 Connecting the scanner
If you use Windows 95 or Windows NT4, you need to connect the scanner to your
computer's printer port.
To do so, see section 3.2.1.
If you use Windows 98, you can connect the scanner to either the printer port or the
USB port on your computer.
We recommend, however, that you use the USB port in order to avoid problems with
your printer.
See section 3.2.2.
Figure 3: USB cable (A) and Parallel cable (B)

Combi Scan USB 19200
7
3.2.1 Parallel printer port
1. Switch off the computer and any peripheral equipment.
2. Disconnect the power plug from the mains supply.
3. Disconnect the printer cable plug from the parallel port at the back of the
computer (if any).
4. Connect the printer cable (if any) to the 'Printer' connection at the back of the
scanner (connector A, Figure 4).
5. Remove the interface cable from the packaging (Figure 3, cable B) and connect
it to your computer's parallel port.
6. Connect the other end of the cable to the 'Host' connection on the scanner
(connector B, Figure 4).
7. Connect the power supply adapter to the scanner (connector C, Figure 4).
8. Connect the power supply adapter to the mains supply.
9. Connect the computer power plug to the mains supply.
Your scanner (and printer) are now connected and you are read to start installing the
driver and applications. You may need to reinstall your printer.
Go to chapter 4.
Note: The driver switches the scanner on and off automatically. For this reason,
the scanner does not have an on/off switch.
Figure 4: Back side of the scanner

Combi Scan USB 19200
8
3.2.2 USB port
Note: Your printer may not be attached to the scanner's daisychain port if you are
using the USB connection.
1. Start Windows 98
2. Insert the CD-ROM supplied into your CD-ROM drive.
3. Insert the EPP-USB conversion cable (Figure 3, cable A) into a free USB
connection on your computer. Windows will indicate that new hardware has been
found.
4. Click on 'Next'. A new window will pop up (see Figure 5).
Figure 5: Searching for the best driver

Combi Scan USB 19200
9
5. For the first option select 'Search for the best driver for your device
(Recommended)' and then click on 'Next'. A new window containing 4 options will
pop up (see Figure 6).
Figure 6: Specifying a driver location
6. Choose the last option: 'Specify a location'.
7. On the command line, type 'D:\DRIVER\WIN98' and click on 'Next'.
Windows will now indicate that a 'Trust Combi Scan USB 19200' has been
found.
8. Click on 'Next'. A number of files will now be copied to your hard disk.
Windows may announce that no files have been found. If so, specify
'D:\DRIVER\WIN98'.
9. Click on 'Finish' to complete the installation of the EPP-USB conversion cable.
10. Connect the EPP-USB conversion cable to the 'Host' connection on the scanner
(see Figure 4, connector B).
11. Connect the power supply adapter cable to the scanner (Figure 4, connector C).
12. Connect the power supply adapter to the mains.

Combi Scan USB 19200
10
4. Installing the driver and software
4.1 Installing the driver
In order for you to be able to use your scanner under Windows, the TWAIN driver
and applications software must first be installed.
Close any active programs before installing the software.
1. Start Windows.
2. Insert the application CD-ROM supplied into your CD-ROM drive.
3. Using the mouse, click on ‘Start’ and select ‘Run’.
4. On the command line, type [D:\SETUP.EXE]. Next, click on 'OK’ (see Figure 7).
Figure 7: Installing in Windows 95, 98 and NT 4
5. Using the mouse, select your preferred language for the installation (English,
French, German, Italian, Spanish, Portuguese, or Dutch) (see Figure 8). After
you have selected your preferred language, a screen like the one shown in
Figure 9 will appear.
Figure 8: Selecting a language

Combi Scan USB 19200
11
6. Click on 'Scanner Driver Parallel' if the scanner is connected to the printer port.
Click on 'Scanner Driver USB' if the scanner is connected to the USB port.
A window like the one shown in Figure 10 will pop up.
Figure 9: Installation menu
7. Click on ‘Next’. The driver will now be installed.
Figure 10: Installing the driver
The TWAIN driver has not been installed. Proceed with section 4.2 to install
TextBridge Classic 2.0.

Combi Scan USB 19200
12
4.2 Installing TextBridge Classic 2.0
After the driver installation, the installation menu will remain visible (see Figure 9). If
this is not the case, repeat steps 1 to 5 from section 4.1. Proceed as follows to install
TextBridge.
1. In the installation menu (see Figure 9), click on ‘Textbridge’. A window like the
one shown in Figure 11 will pop up.
Figure 11: Selecting a language
2. Select the language for TextBridge Classic (US English, UK English, French,
Spanish, Italian, or Portuguese). A window like the one shown in Figure 12 will
pop up.
Figure 12: Installing TextBridge Classic 2.0

Combi Scan USB 19200
13
3. Click on ‘Next’. A window like the one shown in Figure 13 will appear.
Figure 13: Installing TextBridge Classic 2.0
4. Click on ‘Yes’ to accept the license agreement and continue with the installation.
A window like the one shown in Figure 14 will be displayed.
Figure 14: Installing TextBridge Classic 2.0
5. Click on 'Custom', so that a bullet appears in the box.
6. Click on 'Next' to select the language you wish to use for OCR. A new window
will pop up.

Combi Scan USB 19200
14
7. Click on 'Language packs' to select the languages to use (see Figure 15).
Figure 15: Selecting a language
Note: You will be able to recognise text only in the languages you select at this
point. Once the installation has been completed, you will be able to add
other languages for OCR.
8. Click on ‘Next’ to continue with the installation of TextBridge Classic. A new
window about the registration of TextBridge will pop up.
9. Click on 'Next'. A window about product registration will pop up.
10. Click on 'Cancel'. You will asked whether you wish to cancel the product
registration.
11. Click on 'Cancel'. You are asked to confirm the cancellation of the product
registration.
12. Click on 'OK' to complete the installation of TextBridge Classic.
13. Click on ‘OK’ to restart your computer.
You have now completed the installation of TextBridge Classic 2.0. Proceed with
section 4.3 for the installation of Adobe PhotoDeluxe 2.0.

Combi Scan USB 19200
15
4.3 Installing Adobe PhotoDeluxe 2.0
Adobe PhotoDeluxe 2.0 is a program that will enable you to scan and edit images.
Follow the instructions below for the installation of PhotoDeluxe.
1. Insert the ‘Adobe PhotoDeluxe’ CD-ROM into the CD-ROM drive.
2. Using the mouse, click on ‘Start’. Select ‘Run’ if the installation does not start
automatically.
3. On the command line, type [D:\AUTORUN.EXE] and click on ‘OK’. A window
like the one shown in Figure 16 is displayed.
Figure 16: Selecting a language

Combi Scan USB 19200
16
4. Select your preferred language and click on ‘Next’. A window like the one shown
in Figure 17 will appear.
Figure 17: Licence agreement
5. Click on ‘Accept’ to accept the license agreement and continue with the
installation. A window like the one shown in Figure 18 will appear.
Figure 18: Installing Adobe PhotoDeluxe 2.0
6. Click on ‘Adobe PhotoDeluxe 2.0’ to start the installation.

Combi Scan USB 19200
17
7. In the next screen, click on ‘Next’. A window like the one shown in Figure 19 will
appear.
Figure 19: Installing Adobe PhotoDeluxe 2.0
8. Select ‘Typical’ and click on ‘Next’ to continue. A window like the one shown in
Figure 20 will appear.
Figure 20: Installing Adobe PhotoDeluxe 2.0
9. You are prompted to enter information in this window. The serial number can be
found on the CD-ROM box. Click on ‘Next’ to continue.

Combi Scan USB 19200
18
10. The next screen will ask you to confirm the information you have provided. Click
on ‘Yes’. A window like the one shown in Figure 21 will appear.
Figure 21: Installation Adobe PhotoDeluxe 2.0
10. Click on ‘Next’. A window like the one shown in Figure 22 will appear.
Figure 22: Installing Adobe PhotoDeluxe 2.0
11. Disable the on-line registration option for PhotoDeluxe (see Figure 22). Click on
‘Finish’ to complete the installation.
12. Click on ‘OK’ to restart your computer.
You have now completed the installation of Adobe PhotoDeluxe 2.0. If you have a
modem, you can register the software on-line after installation. For instructions, refer
to the software manual supplied on the CD-ROM. Refer to the next sections for
instructions on using the scanner and the applications.