
10
After charging the battery, press the ON/OFF button for 3 seconds and the
Carers Watch will power up with the power on sound.
The Carers Watch will display default time and day details. These details
will be automatically updated when the Carers Watch has received
the initial satellite signal. This may take a few minutes. The screen will
automatically stop displaying the time after a few seconds. This happens
to conserve the battery life.
To check if correct day and time has been established re-press the ON/
OFF button. If this has still not happened, please place the Carers Watch
near a window with view of the sky for a few minutes to get the initial
satellite signal. Now you should have correct day and time.
TURNING THE WATCH ON
Turn the watch o by holding down the ON/OFF button for 1 second,
release for 1 second, then press and hold for 15 seconds.
TURNING THE WATCH OFF